|
| 1 | Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/50 ltrs of any type and make, at site complete all as directed. |
| 2 | Refixing storage type water heater storage type capacity 25/50 ltrs of any type and checking the serviceablity of all parts of such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.Note :-Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below. |
| 3 | Supply only heating elements, 1.5 KW ISI mark 230 volts Make -THEETA/Hotmax/Elcon |
| 4 | Ditto all as per serial item no.03 above but 2 KW. Make- Theeta/Hotmax/Elcon or equivalent. |
| 5 | Supply only thermostat immersion point ,Length 175 mm to 250 mm , Temperature 0 to 75 degree C , 230 volts/AC Make - THEETA/BAJAJ/HOTMAX/ELCON. |
| 6 | Supply only safety valve for 25/50 ltr geyser. |
| 7 | Supply only pressure releasing valve for 25/50 ltr geyser. |
| 8 | S&F in repair connecting sheet metal enclosure with two pin and earth metal clad plug and socket complete, with one double pole MCB 20 Amp Make : Havells/ Standard/ HPL. |
| 9 | Supply & Fix in repairs Three pin plug top, 16 amp capacity, 240 V AC, heavy duty (Make : Anchor, Havells, Indoasian ) |
| 10 | Supply & Fix in repairs MCB SP 16 Amps single pole,B curve, 230volt, 50 Hz Complete all as specified (Make Legrand, Havells ,Indoasian ) |
| 11 | Supply & Fix in repairs Fastners screw for fixing Geyser storage capacity 25/50 ltrs of any type and make |
| 12 | Supply & Fix in repairs PVC connection pipe duly chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete all as specified and directed by Engineer-In-Charge. |
| 13 | Supply & Fix in repairs PVC connection pipe duly chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 600 mm suitable for Hot/ cold water system complete all as specified and directed by Engineer-In-Charge. |
| 14 | Supply & Fix in repairs indicator lamp assembly for geyser complete all as specified and directed by Engr-In-Charge. |
| 15 | Supply & Fix in repairs 3 core PVC insulated and sheathed cable with copper conductor of size 40/0.076. Make - Plaza/National complete all as specified. |
| 16 | Supply & Fix in repairs inlet & outlet assembly plate suitable for 25 ltrs capacity geyser as per existing pattern complete all as specified and directed by Engr-In-Charge. |
| 17 | Ditto all as per serial item no. 16 but 50 Ltrs |
| 18 | Supply & Fix including taking down for Inner tank of geyser of 25 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser complete all as specified |
| 19 | All as per item No. 18 for 50 Ltr |
| 20 | Supply & Fix in repairs STOP COCK cast copper alloy, screwed down high pressure screwed both ends for iron pipe of 15 mm bore fancy type chromium plated complete all as specified. Make-Sieko, Prayag, Jaguar. |
| 21 | S & F in repairs Bib tap chromium plated 15 mm dia cast copper alloy with butter fly handle, screwed down, screwed one ends for pipe of 15 mm dia complete all as specified and directed. Make-Sieko, Prayag, Jaguar. |
| 22 | M&L for servicing of ETC/FPC type solar water heater of any capacity including taking down ,cleaning and descaling of tubes,refixing of tubes,checking and prevention of any leakages,functioning of NRV & gate valves,cleaning of stainless steel hot water tank,checking and repair the heating coil connections,functioning of thermostst etc.Defective items replaced will be measured under respective items. |
| 23 | Dismantling old defective FPC solar water heater collector of any type any make from existing location carefully complete all as directed. |
| 24 | S&F BIS certified manufacturer/state nodal agencies approved manufacturers polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 500 LPD with minimum one year warranty complete all as specified and directed by Engr-in-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 25 | S&F BIS certified manufacturer/state nodal agencies approved manufacturers polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 300 LPD with minimum one year warranty complete all as specified and directed by Engr-in-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 26 | S&F BIS certified manufacturer/state nodal agencies approved manufacturers polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 200 LPD with minimum one year warranty complete all as specified and directed by Engr-in-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 27 | S&F BIS certified manufacturer/state nodal agencies approved manufacturers polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 150 LPD with minimum one year warranty complete all as specified and directed by Engr-in-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 28 | S&F BIS certified manufacturer/state nodal agencies approved manufacturers polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 100 LPD with minimum one year warranty complete all as specified and directed by Engr-in-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 29 | Taking down of Old U/S hot water tank of any capacity any make. |
| 30 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 500 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 31 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 300 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 32 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 200 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 33 | S&F BIS certified manufacturer/state nodal agencies approved manufacturersMNRE registered/approved 150 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 34 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 100 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 35 | S & F MNRE registered/approved 200 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 20 tube holes of 58mm diameter and outer PPGI with 20 Nos of 58x1800 mm tubes , thermostat and heater coil 2 KW and suitable size of MS powder coated stand 25x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 36 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 150 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 15 tube holes of 58mm diameter and outer PPGI PUF insulation with 15 Nos of 58x1800 mm tubes with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 37 | S & F BIS certified manufacturer/state nodal agencies approved manufacturers 100 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 10 tube holes of 58mm diameter and outer PPGI with 10 Nos of 58x1800 mm tubes with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge. Note : The product should has the ISI mark. (IS: 12933 for FPC,IS:16544 for ETC) |
| 38 | S&F tubes of Evacuated tube collector (ETC) type 1800mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F tubes of Evacuated tube collector (ETC) type 2100mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge. |
| 40 | Taking down old U/S , broken pipe of any type any size. |
| 41 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete of size 20mm including union, bends and tees complete all as specified. Make: Astral, Supreme |
| 42 | S&F including taking down for heating element for solar water heating system of capacity 2/3 KW complete all as specified & directed by Engineer-in-charge. |
| 43 | S&F including taking down for thermostat 3 KW suitable for 100 to 500 litres capacity of solar water heater complete all as specified & directed by Engineer-in-charge. |
| 44 | Dismantling & taking out the unserviceable Gun-metal, globe or gate valves of any size from geyser/solar connection pipe complete all as specified and directed by Engr-In-Charge. |
| 45 | S&F for Gun-metal, globe or gate valves, with iron wheel head ,screwed both ends from iron pipe and fixed size 15 mm complete all as specified & directed by Engineer-in-charge. |
| 46 | All as per Serial Item No 45.00 above but size 20 mm (Make: Zoloto/Leader/Kirloskar) |
| 47 | All as per Serial Item No 45.00 above but size 25 mm (Make: Zoloto/Leader/Kirloskar) |
| 48 | S&F including taking out Ball brass valves,high pressure,with polythene float valve 20mm and flynut complete,screwed for iron pipe complete all as specified and directed |
| 49 | S&F Non return valve of 20/25 mm dia all as specified and directed by Engr in charge. |
| 50 | Supply & Fix including taking down for rotational moulded synthetic (HDPE) water storage tank of capacity of 1000 litre capacity triple layered, cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 51 | Supply & Fix including taking down for rotational moulded synthetic (HDPE) water storage tank of capacity of 500 litre capacity triple layered, cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 52 | S & F including taking out for GI tubing 20 mm dia medium grade galvanised with necessary fittings such as tees, elbows, bends, reducers, union etc laid in wall ceiling & Floor including all fittings all as specified and directed. |
| 53 | S & F including taking out for GI tubing 15 mm dia medium grade galvanised with necessary fittings such as tees, elbows, bends, reducers, union etc laid in wall ceiling & Floor including all fittings all as specified and directed. |
| 54 | S & F including taking down sheet metal single pole and neutral enclosure with a two pin and eath plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and directed by Engr-in-charge. |
| 55 | M & L including taking down for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.Note :- Three runsof 4.00 Sqmm cable & one run of PVC conduit shall be paid as one unit length. |
| 56 | M & L including taking down for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC casing caping including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.Note :- Three runsof 4.00 Sqmm cable & one run of PVC conduit shall be paid as one unit length. |
| 57 | S & F for sheet metal enclosure MCB SPN DB 8 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed. |
| 58 | S & F for sheet metal enclosure MCB SPN DB 4 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed. |
| 59 | S & F for sheet metal enclosure MCB SPN DB 2 way 240 volts sngle door with magnitic locking system complete all as specified and as directed. |
| 60 | Supply and fixing MCB's single pole and neutral 25/32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. |
| 61 | Taking down of old U/S rusted MS structure of solar water tank any type any shape |
| 62 | Taking down of old U/S rusted MS structure of cold water tank any type any shape |
| 63 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like includind caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates grade Fe-290 (Gde E-165), including all lattice bars, stiffeners, gusset plates etc welded together, anchor duly painted with two coats of synthetic enamel paint over and coat of red oxide primer and and forming PCC work and 12mm thick etc complete to avoid any deformation complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
