|
| 1 | Taking down chowkats or frames exceeding 1.5 sqm and not exceeding 4.0 sqm each, with shutters (without taking shutters off), and making good disturbed surfaces to match, complete all as specified and directed. |
| 2 | All as per item 1.00 but for chowkats or frames not exceeding 1.5 sqm each |
| 3 | Taking down shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each, complete all as specified and directed. |
| 4 | All as per item 3.00 but for shutters n.exc 1.0 sqm each |
| 5 | Dismantling boarding of any description, any thickness and size, fixed in any position, complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and disposing of rubbish, complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or concrete surfaces (walls/ceilings), including racking out joints, hacking for key, scrubbing down with water and removing rubbish outside MoD land, complete all as specified and directed. Note: Rates are deemed to include necessary scaffolding and form works. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified & directed. |
| 9 | M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue and pinned at joints, supplied and fixed, complete all as specified and directed. |
| 10 | M&L for 35 mm thick second class hardwood plain framed, panelled shutter with 9 mm BWP commercial ply panels or 12 mm veneered particle board panels (commercial veneering on both faces), rails and stiles as per IS 1003 (Part‑I), kiln seasoned and chemically pressure‑treated, complete all as specified and directed. |
| 11 | M&L for 30 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass/gauze (without sash bars), edges of framing plain/chamfered/rounded, fitted with cut and mitred beads; members as per SSR Part‑I, Sec 8, Cl 8.24(a); supplied and fixed to chowkats, divided into squares with mitred and rebated sash bars as required, complete all as specified and directed. |
| 12 | S&F stainless steel butt hinges 100 mm, with mild‑steel hinge pin, bright‑polished, type B‑11, fixed, complete all as specified and directed. |
| 13 | S&F aluminium anodised barrel tower bolts 200 mm long of extruded sections, complete all as specified and directed. |
| 14 | S&F aluminium alloy anodised sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clips of extruded sections/cast aluminium alloy, complete all as specified and directed. |
| 15 | S&F floor door stopper 140 mm long, aluminium‑alloy body and tongue, anodised, with hard‑drawn steel spring, fixed in floor, complete all as specified and directed. |
| 16 | S&F aluminium alloy handles 150 mm, cast type, fixed, complete all as specified and directed. |
| 17 | S&F mild steel mortice lock, 4‑lever, vertical type, size 100 mm, with necessary fittings, complete all as specified and directed. |
| 18 | S&F solid PVC door frame 50×47 mm made out of 5 mm wood‑grain printed PVC sheet reinforced with MS square tube; edges finished to match, complete all as specified in manufacturer's drawing and directed. |
| 19 | S&F factory made solid panel PVC door shutter 30 mm thick comprising MS tube frame for top and bottom rails, covered with heat‑moulded plain‑colour PVC ‘C’ channel; 20 mm PVC strip on stiles with solvent cement; plain‑colour PVC sheet for top/bottom rails and panelling fitted in the MS frame and welded/sealed to stiles and rails with suitable PVC sheet bedding and solvent cement; supplied and fixed in frame, complete all as specified in manufacturer's drawing and directed. |
| 20 | S&F stainless steel butt hinges 75 mm, with mild‑steel hinge pin, bright‑polished, type B‑11, fixed, complete all as specified and directed. |
| 21 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified and directed. |
| 22 | S&F 100 mm extruded aluminium alloy handles, cast type, fixed, complete all as specified and directed. |
| 23 | M&L for anodised aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleats for fixing, complete all as specified & directed. |
| 24 | S&F anodised aluminium sections for door shutters, aluminium section weighing not less than 0.55 kg/m, including necessary joining cleats, glazing clips, rubber neoprene packing, two handles in each door, hinges/pivots for fixing purpose and anodised aluminium snap beading with screws, complete all as specified and directed. |
| 25 | S&F anodised aluminium sections for window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m, including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading and screws, complete all as specified and directed. |
| 26 | S&F 4.0 mm thick sheet glass, ordinary quality, glazing with oil putty, in square exceeding 0.5 Sqm in each pane, fixed to aluminium windows/ventilators, complete all as specified and directed. |
| 27 | S&F 4.0 mm thick sheet glass, ordinary quality, glazing with oil putty, in square not exceeding 0.5 Sqm in each pane, fixed to aluminium windows/ventilators, complete all as specified and directed. |
| 28 | S&F 4.0 mm thick sheet glass, ground/obscured/frosted, ordinary quality, glazing with oil putty, in square not exceeding 0.5 Sqm in each pane, fixed to aluminium windows/ventilators, complete all as specified and directed. |
| 29 | S&F anodised aluminium grill (transparent or dyed to required shade) conforming to IS 1868, minimum anodic coating grade AC 15, of approved design/pattern, fixed to existing frame with CP brass/stainless steel screws @ 200 mm c/c, including cutting to proper opening size, fixing for operation of handles, and providing anodised aluminium standard section around the opening, complete all as specified and directed. |
| 30 | S&F stainless steel wire cloth, 0.36 mm nominal dia wire, average aperture width 1.40 mm, fixed with stainless steel wire staples, complete all as specified and directed. |
| 31 | S&F 12 mm thick particle board, medium density, flat pressed, single layer or three layer type, BWR adhesive, fixed in aluminium frame with rubber packing and aluminium beading, complete all as specified and directed. |
| 32 | S&F aluminium (die cast) body door closer, hydraulically regulated, designation No.3, universal type, suitable for shutters 851 to 1000 mm wide, 61 to 80 Kg weight, complete all as specified and directed. |
| 33 | S&F double-action floor spring, hydraulically regulated, minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, brass pivot, and other mild steel parts, heavy duty, complete all as specified and directed. |
| 34 | S&F framed work such as grills, gratings, sunshades, with ends of bars shouldered and/or riveted/welded/forged into spikes, guard bars, iron doors, ladders, balustrades, walkways, railings, water tank framework, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed. |
| 35 | S&F 18 mm thick particle board, medium density, flat pressed, single layer or three layer type, BWR adhesive (cupboards), fixed in aluminium frame with rubber packing and aluminium beading, complete all as specified and directed. |
| 36 | S&F 100 mm D-type stainless steel handles, fixed to cupboard drawers, complete all as specified and directed. |
| 37 | S&F 40 mm wide continuous (piano) hinges, stainless steel, bright finish or electro-galvanised, fixed to cupboard doors, complete all as specified and directed. |
| 38 | S&F 20 mm dia anodised aluminium alloy curtain rod, complete all as specified and directed. |
| 39 | S&F anodised aluminium alloy brackets, suitable for 20 mm dia curtain rod, complete all as specified and directed. |
| 40 | M&L for preparation of new wooden surfaces exceeding 10 cm width/girth, applying two coats of synthetic enamel spray paint over one coat of pink primer, complete all as specified and directed. |
| 41 | M&L for applying one coat of acrylic washable distemper on old decorated plastered surfaces of walls, including preparation of old surfaces, complete all as specified and directed. |
| 42 | M&L for coloured glazed ceramic tiles (first quality), 6–7 mm thick, size 300×200 mm / 300×450 mm, laid on vertical surfaces such as skirting, dados and risers to steps, including 10 mm thick cement plaster in CM 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed. |
| 43 | M&L for rendering 15 mm thick on brick or concrete surfaces in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 44 | M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, including finishing of surface with 3 mm thick wall care putty, complete all as specified and directed. |
| 45 | M&L for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 46 | M&L for providing and injecting emulsion for post-construction anti-termite treatment at points of contact of wood with masonry/concrete surfaces, using chemical emulsion mixed with oil or kerosene at the rate of 0.5 litres per hole, including drilling 6 mm dia holes at a downward angle of 45° at 150 mm c/c, and plugging the holes with CM (1:2), complete all as specified and directed. |
| 47 | Resecuring, easing and adjusting shutters without taking down from frame, and re-fixing builder’s hardware as required, including removal of unserviceable screws, not exceeding 1.0 Sqm each, complete all as specified and directed. |
| 48 | Resecuring, easing and adjusting shutters without taking down from frame, and re-fixing builder’s hardware as required, including removal of unserviceable screws, exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, complete all as specified and directed. |
| 49 | S&F in repairs extruded aluminium alloy butt hinges, 75 mm size, with galvanised mild steel hinge pin type C-22, complete all as specified and directed. |
| 50 | S&F in repairs extruded aluminium alloy butt hinges, 100 mm size, with galvanised mild steel hinge pin type C-21, complete all as specified and directed. |
| 51 | S&F aluminium alloy anodised sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clips of extruded sections/cast aluminium alloy, complete all as specified and directed. |
| 52 | S&F in reapair aluminium powder coated barrel tower bolts 150 mm long of extruded sections, complete all as specified and directed. |
| 53 | S&F double-action floor spring, hydraulically regulated, minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, brass pivot, and other mild steel parts, heavy duty, complete all as specified and directed. |
| 54 | S&F mild steel mortice lock, 4‑lever, vertical type, size 100 mm, with necessary fittings, complete all as specified and directed. |
| 55 | S&F in reapair stainless steel wire cloth, 0.36 mm nominal dia wire, average aperture width 1.40 mm, fixed with stainless steel wire staples, complete all as specified and directed. |
| 56 | S&F 12 mm thick particle board, medium density, flat pressed, single layer or three layer type, BWR adhesive, fixed in aluminium frame with rubber packing and aluminium beading, complete all as specified and directed. |
| 57 | S&F aluminium (die cast) body door closer, hydraulically regulated, designation No.3, universal type, suitable for shutters 851 to 1000 mm wide, 61 to 80 Kg weight, complete all as specified and directed. |
| 58 | M&L for preparation of old painted wooden surfaces of any description, over 10 cm width or girth, and applying one coat of synthetic enamel paint, including scaffolding and safety measures, complete all as specified and directed. |
| 59 | M&L for 12 mm thick plywood, grade BWR, type BB, fixed with screws to timber framework, complete all as specified and directed. |
| 60 | M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Please Enable Macros to View BoQ information |
