Tender For Repair To Toilet, Bathroom And Connected Works At North C , South C , East C And West C At Mffr Under Age(I) Mffr.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
7 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mahajan → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Toilet, Bathroom And Connected Works At North C , South C , East C And West C At Mffr Under Age(I) Mffr.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old rested and damaged steel window/ventilator including guard bars where exist of size not exceeding 1.50 Sqmtr each (without taking off shutters from the frames) complete all as specified and as directed. |
| 2 | S&F mild steel ventilators with top hung shutter including hinges, steel peg stay etc , complete all as specified and as directed. |
| 3 | M&L for Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed. |
| 4 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 5 | Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. or brick surrounds glazed with putty or fixed with beads alnd S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and as directed. |
| 6 | S&F 3.0mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed. |
| 9 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone agg as in sub floor to floor fininshed the surface even and fair to receive tile topping complete all as specified and as directed. |
| 10 | M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in plinth protection/ hard standing surface finished even and smooth without using extra cement complete all as specified and directed. Note :- Plinth protection/hard standing shall be of width as directed and shall be laid with an outward slope of 1:30 in alternative bays not exceeding 4 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 11 | M&L for Non skid coloured ceramic tiles area exc 0.11 sqm but not exc 0.18 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed. |
| 12 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 13 | Dismantling of plain or corrugated steel sheeting any gauge or thickness in roof coverings incl ridge complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 15 | All as per item No 14 here-in-before but using old serviceable steel/galvalume sheets with new L-type or J-type or cranked hooks complete all as specified and as directed by Engineer-in-Charge. |
| 16 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with L-type or J-type or cranked hooks complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Dismantling structural steel work including door gates etc complete all as specified and as directed. |
| 18 | S &F Rolled mild sections in Joist, channel, angle, or tee sections, fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to FE-410-W ( Gde -E-250) quality A . complete all as specified and as directed. |
| 19 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mmthick AC building board or commercial plywood and fixed to wooden plugs withchromium plated brass screws and cupwashers complete all as specified and as directed. |
| 20 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges , complete all as specified and as directed |
| 21 | S&F in repairs brass chromium Soap dish, fancy type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 22 | Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed. |
| 23 | S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed. |
| 24 | Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed. |
| 25 | S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed. |
| 26 | S&F Gun metal gate valve 15mm bore with iron wheel head screwed both ends for iron pipes complete all as specifed and as directed. |
| 27 | Supply and fixing Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifed and as directed. |
| 28 | S&F in replairs Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed. |
| 29 | S&F in repair Pillar taps, cast copper alloy, with capstan head fancy type chromium plated, screwed down, high pressure with long screwed shank and fly nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed. |
| 30 | S&F in repair grating 75mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and as directed. |
| 31 | S&F in repair PVC grating 125 mm dia complete all as specified and as directed. |
| 32 | S&F in repairs Stop valves/angle valves , cast copper alloy chromium plated fancy type, screwed down, high pressure, brass with crutch or butterfly handle, screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm bore complete all as specified and as directed. |
| 33 | S&F in repairs Brass chromium plated shower rose 125mm size with swivel joints, fixed in repairs complete all as specified and as directed. |
| 34 | S & F in repair Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm dia (minimum weight 210 Gms) and fixed complete all as specified and as directed. |
| 35 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 36 | M&L for Vitreous china wash basin, white, flat back, size 580 x 440mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete all as specified and as directed. |
| 37 | S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete all as specified and as directed. |
| 38 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete including cover, flush pipe incl all joints complete all as specified and as directed. |
| 39 | S & F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 40 | Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 1000lit complete all as specified and as directed. |
| 41 | S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) triple layered, hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified.Notes :-(i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and ball valve as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item. |
| 42 | Cleaning of Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 1000lit including of cleaning date with paint complete all as specified and as directed. |
| 43 | S&F in repair PVC waste pipe 32mm for wash hand basin or urinal complete all as specified and as directed. |
| 44 | S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity complete all as specified and as directed. |
| 45 | S&F in repairs 5.5mm thick sheet glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed. |
| 46 | S&F in repairs health faucet (ABS body) mild steel CP suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 47 | S&F Vitreous china bowl urinal Haif stalf type, white, with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including providing 32 mm bore PVC waste pipe and 25 mm bore light grade GI flush pipe complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 48 | S&F Vitreous china bowl urinal Haif stalf type, white, with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including providing 32 mm bore PVC waste pipe and 25 mm bore light grade GI flush pipe complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 days