|
| 1 | M&L for point wiring complete with multi stranded copper conductor cable of size 1.5 sqmm PVC insulated unsheathed FRLSH colour coded 1100 volts grade drawn in existing conduit fixed on surface/ concealed with new sunken terminal boxes and cover for mounting modular switch/ sockets etc. including PVC insulated unshearthed 1.5 sqmm multistranded copper conductor cable FRLSH colour code cable 1100 volts grade for earth continuity including taking down old copper/ aluminium point wiring (light, fan, socket or power) complete from existing concealed/ surface conduits/ casing capings etc and making good disturbed surface of walls, floors, etc. for the following complete all as specified and directed:- |
| 2 | One light /fan point controlled by one switch . |
| 3 | One three pin 6 amp socket outlet multipurpose on independent board. |
| 4 | One three pin 6 Amp switch socket outlet on the same board with other switches. |
| 5 | One light point controlled by 2 No. 2-way switches. |
| 6 | One bell point controlled by bell push. |
| 7 | All as per item No 1.00 above but with 2.5 sqmm size PVC insulated cable for 3 pin 15 amp multipurpose outlet on independent board including 2.5 sqmm PVC insulated copper cable for earth continuity on independent board complete.Note for item No. 1.01 to 1.05 & 2.00 : Sunken box and cover plates required shall be measured and paid separately under respective item. |
| 8 | M&L for point wiring using stranded copper conductor FRLSH cable of size 1.5 sqmm, PVC insulated unsheathed complete in existing concealed/surface conduit with new sunken terminal boxes and with new 3 mm thick hylam sheet for mounting of switches, sockets, fan regulators etc with screws and 1.5 sqmm PVC insulated stranded copper conductor FRLSH cable as continues earth wire connected to common earth dolly incl taking down old copper/aluminium point wiring (light, fan, socket or power) from existing surface/concealed conduits, casing/caping etc and making good disturbed surfaces of walls, floors etc for the following complete all as specified and directed :- |
| 9 | One light/ fan point controlled by one switch . |
| 10 | One three pin 6 amp socket outlet multipurpose on independent board. |
| 11 | One three pin 6 Amp switch socket outlet on the same board with other switches. |
| 12 | One light point controlled by 2 No. 2-way switches. |
| 13 | One bell point controlled by bell push. |
| 14 | All as per item No 3.00 above but with 2.5 sqmm size PVC insulated cable for 3 pin 15 amp multipurpose outlet on independent board including 2.5 sqmm PVC insulated copper cable for earth continuity on independent board complete.Note for item No. 3.01 to 3.05 & 4.00 : The unit rate includes Sunken box and 3 mm thick hylam sheet |
| 15 | M&L for point wiring as per colour coding with 1.5sqmm FRLSH cable PVC insulated unsheathed with stranded copper conductor cable drawn in and including 19mm thick rigid non metallic PVC concealed conduit medium grade with all standard fittings including Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring and making good, cutting not exceeding 10cm girth, and removal of rubbbish outside premises and providing new sunken terminal boxes and cover for mounting modular switch/ sockets etc. including PVC insulated unshearthed 1.5 sqmm multistranded copper conductor cable FRLSH colour code cable 1100 volts grade for earth continuity including taking down old copper/ aluminium point wiring (light, fan, socket or power) complete from existing concealed/ surface conduits/ casing capings etc and making good disturbed surface of walls, floors, etc.for the following complete all as specified and directed :- |
| 16 | One light /fan point controlled by one switch . |
| 17 | One three pin 6 amp socket outlet multipurpose on independent board. |
| 18 | One three pin 6 Amp switch socket outlet on the same board with other switches. |
| 19 | One light point controlled by 2 No. 2-way switches. |
| 20 | One bell point controlled by bell push. |
| 21 | All as per item No 5.00 above but with 2.5 sqmm size PVC insulated cable for 3 pin 15 amp multipurpose outlet on independent board including 2.5 sqmm PVC insulated copper cable for earth continuity on independent board complete.Note for item No. 5.01 to 5.05 & 6.00 : Sunken box and cover plates required shall be measured and paid separately under respective item. |
| 22 | S&F in repairs modular switch 1 way 6 A, 1 module all as specified and directed. |
| 23 | S&F in repairs modular switch 2 way 6 A, 1 module all as specified and directed. |
| 24 | S&F in repairs modular bell push switch 1 way 6 A, 1 module all as specified and directed. |
| 25 | S&F in repairs modular socket outlet, 2/ 3 pins combined, 6 Amps, 2 module, 230 volts all as specified and directed. |
| 26 | S&F in repairs modular switch 1 way 16 A, 1 module all as specified and directed. |
| 27 | S&F in repairs modular socket outlet, 6/ 16 Amps, 2/3 pin combined, 230 volts, 2 module all as specified and directed. |
| 28 | S&F in repairs modular type electronic ceiling fan step regulator, 120W, 1 module for 1200/ 1400mm sweep ceiling fan complete all as specified and directed. |
| 29 | S&F in replacement of switch piano type, flush type, single pole, one way, 6 Amps complete all as specified and directed. |
| 30 | S&F in replacement of switch piano type, flush type, single pole, two way, 6 Amps complete all as specified and directed. |
| 31 | S&F in replacement bell push switch flush type, single pole, one way, 6 Amps complete all as specified and directed. |
| 32 | S&F in replacement of socket outlet flush type 2/ 3 pins, 6 Amps multipurpose complete all as specified and directed. |
| 33 | S&F in replacement of switch piano type, flush type, single pole, one way, 16 Amps complete all as specified and directed. |
| 34 | S&F in replacement of socket outlet, flush type, multi purpose 3 pin, 6 Amps & 16 Amps, 230 volts complete all as specified and directed. |
| 35 | S&F in replacement ceiling fan regulators, step type, electronic for 1200/ 1400mm sweep complete all as specified and directed. |
| 36 | S&F in repairs ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals, complete all as specified and directed. |
| 37 | S&F in replacement bell Ding Dong AC 230 volts single pole complete all as specified and directed. |
| 38 | S&F in replacement MCB SP 240 volts 6 to 32 Amps, 10KA, 'B' curve type all as specified and directed. |
| 39 | S&F in replacement MCB SPN 240 volts 40 to 63 Amps, 10KA, ‘B’ curve complete all as specified and directed. |
| 40 | S&F in replacement DB sheet metal enclosure double door for MCB’s company made, SPN 240 Volts 12 ways with IP 42 protection with 200 amps rated bus bars complete all as specified and directed. |
| 41 | S&F in replacement DB sheet metal enclosure double door for MCB’s company made, SPN 240 Volts 8 ways with IP 42 protection with 200 amps rated bus bars complete all as specified and directed. |
| 42 | S&F in replacement 04 feet 18 watt LED light fitting, 220V, AC decorative box type with driver holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 43 | S&F in replacement 02 feet 10 watt LED light fitting mirror type, 220V, AC decorative box type with driver holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 44 | S&F in repairs LED light fitting 1 x 9W/ 1 x 10W bulk head luminaires including LED light driver, holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 45 | S&F in repairs City-1/ City-2 wall mounted fittings with ABS housing and clear polycarbonate cover including retrofit LED bulb 9 watt and provision of 0.5 sqmm 3 core flexible copper conductor cable from connector/ ceiling rose to fitting complete all as specified and directed. |
| 46 | S&F in replacement concealed type flush mounted GI sheet metal box 18 gauge thickness suitable for mounting modular switch/ sockets complete with fixing plate and cover plate with frame, with earthing terminal and good quality thread including making good the disturbed surfaces complete all as directed for the following:- |
| 47 | For One/two module |
| 48 | For three module |
| 49 | For four module |
| 50 | For six module |
| 51 | For eight module |
| 52 | S&F Modular white cover blanking plate complete all as specified and directed. Please Enable Macros to View BoQ information |
