Tender For Periodical Services Of Otm Accn Of Various Units Under Ge (A) Jamnagar
Tender Value
22.45 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
3 days left
EMD
44900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services Of Otm Accn Of Various Units Under Ge (A) Jamnagar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick, stone or concrete surface including racking out joints hacking for key scrubbing down with water to receive plaster etc completed as specified and as directed by Engineer in charge. |
| 2 | Dismantaling floor, hearth or wall tiling including cement motar bedding(but not backing) removing servicable tiles to store and rubbish off premises completed as specified and as directed by Engineer in charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm of any description each, complete all as specified and directed by Engineer in charge. |
| 4 | Taking down shutter of any description exc 1 sqm each and n exc 2 sqm each, complete all as specified and directed by Engineer-in-charge. |
| 5 | M & L for rendering 10mm thick in CM (1:6) on surfaces of brick work/ stone masonry /concrete surface of wall, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for Preparation of newly plaster surfaces of wall by hand held sander/ long handle sander including cornices, pilasters etc completed all as specified directed and applying two coat of oil bound distemper over a coat of alkali resistant priming paint with roller finish complete all as specified and as directed by Engineer-In-Charge. |
| 7 | M & L for rendering 5mm thick in CM (1:3) on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for Preparation of newly plaster surfaces of ceiling by hand held sander / long handle sander including cornices, pilasters etc applying three coat of white washing with roller finish complete all as specified and as directed by Engineer-In-Charge. |
| 9 | M & L for rendering 15mm thick in CM (1:4) on fair faces of stone masonry/brick/concrete surfaces of wall, finished even and fair without using extra cement complete all as specified and as directed by Engineer -in-charge. |
| 10 | M&L Preparation of newly plastered surface of wall by hand held sander/ long handle snader including cornices, pilasters etc and applying with airless spray two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete as specified and as directed by Engineer in charge. |
| 11 | M&L for Preparing of old surfaces by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9lit/10 sqm completeall as specified and as directed by Engineer-In-Charge |
| 12 | M&L for Preparation of old surfaces by complete removal of existing treatment of wall by hand held sander/ long handle sander including cornices, pilasters etc completed all as specified directed and applying two coat of oil bound distemper over a coat of alkali resistant priming paint with roller finish, over a coat of 3mm thick wall care putty on walls complete all as specified and as directed by Engineer-In-Charge. |
| 13 | M&L for peparation of old surface of wall removing nails including scraping down smoke soot, moulds, moss and effloresent salts and trading oil and greasy spots etc by hand held sander/ long handle sander including cornices, pilasters etc (plastered or unplastered surfaces), and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L for peparation of old surface of wall by hand held sander/ long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for peparation of old surface of ceiling by hand held sander/ long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F in repairs 25mm SS curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all specified and as directed by Engineer-in-charge. |
| 17 | S&F in repairs curtain rod side brackets of stainless steel, angular, or cantilever type fixed to wall with 02 Nos screws on each bracket and fitted screws for fixinng curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge. |
| 18 | M & L Non skid coloured ceramic tiles 7-8mm thick area of each tiles exceeding .06 Sqm but not exceeding .11 Sqm, in floors etc. set and jointed in neat cement slurry mixed with water proofing liquid compound and pointed in white or coloured grouting chemical to match, over 15mm thick screed bed in CM 1:6(Make: Somany/Johnson/Orient Bell or equivalent) completed as specified and as directed by Engineer in charge. |
| 19 | M&L Glazed ceramic coloured designer tiles in vertical surface 350x250x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement mortar (1:3).Make: Somany/Johnson/Orient Bell or equivalent) completed as specified and as directed by Engineer in charge. |
| 20 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directd by Engineer-in-charge. |
| 21 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to walls all as specified and as directed by Engineer-In-Charge |
| 22 | S&F in repairs PVC(SWR) bend any radius,75 mm dia.provided with access door complete all as specified and directed by Engineer-in-charge. |
| 23 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to walls all as specified and as directed by Engineer-In-Charge |
| 24 | S&F in repairs PVC(SWR) bend any radius,110 mm dia.provided with access door complete all as specified and directed by Engineer-in-charge. |
| 25 | Taking down steel tubing and connection including cleaning for 25 mm dia refixing or removal to store completed as specified and as directed by Engineer in charge. |
| 26 | Taking down steel tubing and connection including cleaning for 20 mm dia dia refixing or removal to store completed as specified and as directed by Engineer in charge. |
| 27 | S&F tube 25 mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors completed as specified and as directed by Engineer in charge. |
| 28 | S&F tube 20 mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors completed as specified and as directed by Engineer in charge. |
| 29 | S & F of 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitings, connected joint with CPVC adhesive taflon tape in any requirment complete to walls and ceilings or laid in floorss including all connected brass CPVC fitting sand cutting grooves filled with CM (1:6) complete as specified and as directed by Engineer-in-charge. |
| 30 | Taking down PVC chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm of any description each, complete all as specified and directed by Engineer in charge. |
| 31 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube completed as specified and as directed by Engineer in charge. |
| 32 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel designed with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core completed as specified and as directed by Engineer in charge. |
| 33 | S&F100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,tupe B-21 completed as specified and as directed by Engineer in charge. |
| 34 | S&F Extruded aluminium alloy handles 125mm long, fabricated type, anodised completed as specified and as directed by Engineer in charge. |
| 35 | S&F Aluminium anodised barrel tower bolts, 150mm long, of extruded section completed as specified and as directed by Engineer in charge. |
| 36 | S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S & F Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with , Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), and connected Items, complete all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as specified by Engineer-in-Charge. |
| 39 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) completed as specified and as directed by Engineer in charge.Make : Cera / Prayag/Parryware or equivalent) complete as specified by Engineer-in-Charge. |
| 40 | S&F in repair 600 X 450 mm bevelled edge miror of selected guality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washer completed as specified and as directed by Engineer in charge. |
| 41 | S&F in repairs 600mm long PVC connection tubes 15mm Size with brass nuts. as selected, completed as specified and as directed by Engineer in charge. |
| 42 | S&F in repair Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed, including waste coupling of PTMT 32mm dia (half or full threaded). (Minimum weight 45gms, washer and brass chromium plated bottle traps for wash with inlet and outlet screws for pope or connections including mecessary packing , union and cap and fixed complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repairs bib taps cast copper alloy chromium plated, fancy type, long body, concealed type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 44 | S & F in repair 15mm fancy type pillar taps, cast copper alloy, with long heads, chromium plated , screwed down high pressure, with or without lettered 'Hot or Cold ' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed cop completed as specified and as directed by Engineer in charge. |
| 45 | S&F in repairs stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. completed as specified and as directed by Engineer in charge. |
| 46 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completed as specified and as directed by Engineer in charge. |
| 47 | S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B of size 92mm x 31.75mm x 1.2mm and shutter section 18mm x 43mm x 1.30mm weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, stainless steel wire cloth 0.36 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make. complete all as specified and directed.Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc completed as specified and as directed by Engineer in charge. |
| 48 | S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 completed as specified and as directed by Engineer in charge. |
| 49 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-In-Charge |
| 50 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint completed as specified and as directed by Engineer in charge. |
| 51 | Dismantling water tank of capacity exc 250 and n exc 500 ltr and removing to store completed as specified and as directed by Engineer in charge. |
| 52 | S&F 500ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified .(Make: Sintex/Rotex/Polycon or Equvalent)all as specified and as directed by Engineer-In-Charge. |
| 53 | Refixing 500 ltr Capacity rotational moulded polyethylene water storage tank completed as specified and as directed by Engineer in charge. |
| 54 | Dismantling exc 500 and n exc 1000 ltr water tank removing to store completed as specified and as directed by Engineer in charge. |
| 55 | S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified.(Make: Sintex/Rotex/Polycon or Equvalent) completed as specified and as directed by Engineer in charge. |
| 56 | Refixing 1000 ltr Capacity rotational moulded polyethylene water storage tank completed as specified and as directed by Engineer in charge. |
| 57 | Demolition brick work /stone masonry built in cement mortar or lime mortar of any description complete all as specified and as directed by Engineer in charge. |
| 58 | M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius ,built in CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 59 | M/L 2nd class Hardwood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints completed as specified and as directed by Engineer in charge. |
| 60 | M&L for Hold fast made of FI of suitable size for fixing of chowkats and similar work con- forming to Fe.290.Gde-E-165, completed as specified and as directed by Engineer in charge. |
| 61 | M &L for Providing cement concrete 1:2:4 type BO using (12.5mm graded aggregate) in cills, steps, seismic and other similar bands plinth coureses string courses lacing courses parapets and railing copings kneelers apex bed plates kerbs. etc.. water troughs and the like including wethering slightly rounded or chamfered angles and throating as directed by Engineer-in-charge. |
| 62 | S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed by Engineer-in-charge. |
| 63 | M&L for factory made 2nd class hardwood rail and style 35mm thick plain framed, panelled shutter (two panel) with, lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated completed as specified and as directed by Engineer in charge. |
| 64 | S&F Powder coated anodised aluminium frame for doors, windows, ventilators with on or more rebets including jointing cleat for fixing etc. complete all as specified and directed by Engineer -in-charge. |
| 65 | S&F Powder coated aluminium doors shutter,alumunium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges , anodised aluminium snap beading screws etc. complete as specified and directed by Engineer-in-charge. |
| 66 | M&L for 12mm thick Prelaminated particle board, interior grade one, prelaminated both sides with decorative choice lamintions, fixed with door shutter etc.complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beads, area exceeding 0.50 sqm and not exceeding 1.0 sqm each pane with and including solar control film 25 micron reflective type (greater sun control or equivalent) complete as specified and directed by Engineer-in-charge. |
| 68 | S&F floor door stopper of aluminium alloy body and tongue, anodised 140mm length with hard drawn steel sping, fixed in floor complete as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender