Tender For Comprehensive Repair & Maintenance Of External Electric Supply Of Ht Distribution System With Accessories At Mount Abu Mil Stn Under Age (I) Udaipur
Tender Value
8 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MOUNT ABU → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair & Maintenance Of External Electric Supply Of Ht Distribution System With Accessories At Mount Abu Mil Stn Under Age (I) Udaipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old Unsv GO's and supply & install 11 KV air break gang operated triple pole out door type gang operated air break switch mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level with 09 Nos insulators outdoor type triple pole suitable for horizontal/vertical installation provided with locking arrangement consisting of MS channel HT post type insulator high pressure heavy tined copper alloy contact assembly suitable for 400 Amps, including air break switch suitable for 11 KV, 400 Amps mounted on 06 Insulators with drop out fuse unit, operating rod 25mm dia GI medium grade pipe complete all as specified and directed by Engr-in-charges. |
| 2 | Material and labour for renewal of earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed by Engr-in-Charge. |
| 3 | Material & labour for repair of GO to smooth operation & alignment of contacts, connect/tighting of HT cable including greasing of moving mechanism, replacement of Male contact/moving contact blade, female contact/fix contact jaw, tinned copper flexible jumper, MS jumper carrier, back connector plate where required, nut-bolts washers etc. of required size and length and testing complete all as specified and directed by Engr-in-charges. |
| 4 | Taking down old unsv and supply & fixing cable jointing kit for 11 KV (Eartherd) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm complete all as specified and directed by Engr-in-Charge |
| 5 | Taking down old unsv and supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge . |
| 6 | Taking down old Unsv and supply and fixing Cable jointing kit for 11 kv (Eartherd ) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sq mm complete all as specified and directed by Engr-in-Charge |
| 7 | Taking down old Unsv and supply and fixing Cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink type straight through joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 sq mm complete all as specified and directed by Engr-in-charges. |
| 8 | Taking down old Unsv and supply and fixing Cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink type straight through joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sq mm complete all as specified and directed by Engr-in-charges. |
| 9 | Taking down old unsv and supply & fixing shackle porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 150mm height, 150mm dia for 11000 volts working pressure grade and with galvanised steel section straps in mm 38x5 with 20 mm dia of bolts complete all as specified and directed by Engr-in-charges. |
| 10 | Taking down old unsv and supply & fix pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and directed by Engr-in-charges. |
| 11 | Supply & fixing in replacement of medium grade galvanised iron tubes 25mm dia of requisite length at two/four pole GO's system for up/down with making required shape or hole, fixed with nut, bolt, washers complete all as specified and directed by Engr-in-charges. |
| 12 | De-Hydration and filtration of transformer oil of the transformer, and Voltage stabilizer, AC, 11KV/433 Volt mounting on 2 pole/ 4 pole structure/ platform complete all as specified and directed by Engr-in-charges. |
| 13 | Supply & filling and topping up fresh transformer Oil having dielectric strength more than 50 KV capacitor at 2.5 mm gap for transformer, complete all as specified and directed by Engr-in-charges. |
| 14 | Material & labour for mild steel cross arms, bracing, supports, back plate & clamps fabricated from structural steel section including nuts, bolts, washer cutting, welding bending cold or hot, drilling holes for bolts in any shape for bolts in any shape or size inclusive of painting with 2 coats of aluminum paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge |
| 15 | M & L for Stay assembly with 20mm dia of stay rod complete with accessories as shown in electrical plate No 1 (loop type insulator,stay clamps, excavation and concrete shall be included in the rate and no separately measured) complete all as specified and directed by Engr-In-Charge |
| 16 | Taking down unserviceble LT Feeder pillar box and Supply, installing, testing and commissioning, factory made and tested (prototype having been CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars suitable Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, externally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) lock with 2 keys, internal wiring 2.5 Sqmm with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size incl the provision of space to accommodate the under mentioned items incl taking out U/s one and making connection with existing LT cables including complete all as specified and directed by Engr-in-charges.the following:- (a) Incoming (i) MCCB 4 pole, 415 volts AC grade, 200 Amps rating and 36 KA rupturing capacity complete - 02 No (ii) Voltmeter 0-500 volts, square, 144 mm, flush pattern with 3 way rotary selector switch - 01 No (iii) Ammeter size 144 mm, square dial, flush pattern having dual range 1000 amps with three way rotary selector switch with suitable size of LT's 01 No (iv) Indicating lamps : 01 set of three |
| 17 | (b) Outgoing (i) MCCB 4 pole, 415 volts AC grade, 100 Amps rating and 16 KA rupturing capacity complete - 05 No (ii) MCCB 4 pole, 415 volts AC grade,63 Amps rating and 63 KA rupturing capacity complete - 03 No (iii) MCB SPN 230 volts AC grade,C Curve, 40 Amps rating complete - 02 Nos (iv) Timer Switch (daily with IP 53 box) - 01 Nos (c) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone aggregate, 15 cm thick in foundation, brick work in CM 1:6 with sub class `B', old size bricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45cm above the nearest road level. Note : (i) All out going feeders shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. |
| 18 | Material and labour for PCC 1:3:6 type C-2 using 40mm grade stone aggeregate for foundation or stay/ pole/ strut complete all as specified and directed by Engr-in-charges. |
| 19 | Material and labour for PCC 1:3:6 type C-1 using 20mm grade stone aggeregate for pedstal including necessary from work including finishing to exposed surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 20 | M & L for repair/servicing of 11KV/433 Volt transformer upto 630 KVA at Army area Mount Abu checking of high voltage out put, replacing of HT & LT porcelain transformer bushing, air breathing filter, complete all as specified and directed by Engineer-in-charge |
| 21 | Material & Labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric HT power cables (heavy duty) with aluminium conductor, 11000 volts Earthed grade cross sectional area 120 sqmm 3 Core. complete all as specified and directed by Engr-in-charges. |
| 22 | Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation/ pipes/ cable etc, n. exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-charges. |
| 23 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in soil complete all as specified and directed by Engr-in-charges. |
| 24 | Removing of excavated surplus soils, n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-charges. |
| 25 | Material & labour for sand cushioning for PVC/XLPE cable with screened and washed sand and punning to provided a required covers complete all as specified and directed by Engr-in-charges. Note :- Punned thick only be measured for payment purpose. |
| 26 | Supply and laying un-reinforced precast concrete cable cover, class HVP, type 2 with peak size 450mm x 180mm x 40mm complete all as specified and directed by Engr-in-charges. |
| 27 | Material & labour for Double wall corrugated HDPE Pipe, heavy duty for laying of electric cables of 100mm dia complete all as specified and directed by Engr-in-charges. |
| 28 | Material & labour for GI pipe 100mm dia medium grade for protection of XLPE UG cable complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender