Tender For special Repair To Bldg No T-27 (Wksp) For 980 (I) Ad Wksp Under Age (I) Nabagram At Nabagram Military Station.
Tender Value
8.97 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nabagram → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-27 (Wksp) For 980 (I) Ad Wksp Under Age (I) Nabagram At Nabagram Military Station.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as specified and directed. |
| 2 | Materia and labour for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement complete, all as specified and directed. |
| 3 | Materia and labour for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement all as specified. |
| 4 | Materia and labour for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper including 2 coat of wall care putty all as directed by Engr -in- charge. |
| 5 | Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones. |
| 6 | S/F for 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane. |
| 7 | M&L for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap roof covering fixed with J or L hooks and incl demolation of old sheets complete all as directed. |
| 8 | Material & labour for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated ) of ERW and FI 2 mm thick welded /screwed to frame for fixinging of sheet glass including fixtures and fittings like a stopper , cleat , pintal hinges , holdfast etc all as shown on drg No CEJZ/TD/1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. (a) 10 mm Sq Guard bar 10 cm C/C(b) One shop coat of red oxide and two coats of synthetic enamel paint to MS ventilator and gaurd bar (c) MS Tower bolt 150m Material and labour forong - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mMaterial and labour forong stopper - 1 No per leaf Note:(i) Including taking down old steel ventilator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing, complete all as specified and directed.(ii) sheet glass and wire mesh shall be measured and paid separately) |
| 9 | Plain, galvanised, mild steel sheeting .63 mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 10 | M&L for mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position complete all as directed & specified . |
| 11 | S&F expended metal sheet size 25x75x1.25mm fixed with all nacessary accessary to fixed in ceiling as a bird catcher complete all as specified and as directed by Engr-in charge |
| 12 | M&L for pre painted galvatume aluminium zinc GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with J or L hooks and incl demolation of old sheets complete all as directed. |
| 13 | Taking down old unserviceable point wiring ( light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified. |
| 14 | Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified. |
| 15 | Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified. |
| 16 | Taking down ceiling fan/ exhaust fan/Wall fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, winding the fan (if required), Painting of ceiling fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified. |
| 17 | M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC(FRLS) insulated and unsheathed cable in and including PVC casing caping fixed on wall,surface,ceiling etc including 3mm thick, laminated Hylen sheet (white colour) for mounting switches, socket, regulator etc on including sunken type pressed steel terminal boxes screw with washer for fixing with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly for the following :-One light point controlled by one switch complete all as specified. |
| 18 | All as per item no.17 above but one fan point controlled by one switch. |
| 19 | All as per item no.17 above but one 3 pin 5 Amps Socket outlet point controlled by one switch on independent board. |
| 20 | All as per item no.17 above but one 3 pin 5 amps socket outlet point on same board with other switches. |
| 21 | M&L for point wiring complete with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRL-SH cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.Note:- Making good of disturbed surfaces will be done by contractor without any claims. |
| 22 | M&L for point wiring complete with 4.0 sqmm single core mulfistranded copper conductor PVC(FRLS) insulated and unsheathed cable 1100v grade fixed on and including PVC casing caping fixed on wall,surfaces,ceiling etc for with 4.0sqmm single core multistandared copper conductor FRLS PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly. |
| 23 | M & L for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.) |
| 24 | M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC casing caping incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 5 runs of 6 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.) |
| 25 | S & F piano flush type switch 5 Amps single pole. |
| 26 | S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps all as specified. |
| 27 | S & F switch socket combination 2 in 1,3 pin 6 &16 Amp flush type. |
| 28 | S&F ceiling rose surface type three terminals complete all as specified and directed. |
| 29 | S & F LED lights fitting 1x 20W, 220V, AC surface mounting general purpose ultra slim economical LED battens in extruded PC housing and square shaped diffusers decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 30 | S & F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including taking down of old unservicable security light complete all as directed by Engineer-in-charge. |
| 31 | Supply and fixing LED highbay light fitting 100 watt 230V AC next generation ,energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (surface/suspended) mounting with system efficacy upto 150lm/W resistant complete with driver and lamp. |
| 32 | S&F MCB TPN DB 4 way double door with 200 amps rated busbar 415 V, all wire connected MCB with help of lugs, all wire connected with meter is covered with flexible conduit and DB will be fixed concealed/surface with wall neatly etc all as specified. |
| 33 | S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, all as specified. |
| 34 | S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, all as specified. |
| 35 | S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified. |
| 36 | S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified. |
| 37 | S & F for MCB four pole of rated capacity 40/63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified. |
| 38 | M & L earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4.0 mm dia earth lead wire by means of nuts bolts washers etc as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, galvanized iron pipe light grade 15 mm diameter for protection of earthing wire, (To be concealed in wall/floor) connected to earthing test point, all as shown in electrical plate No. 3 of MES Schedule Part I. , connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber ,40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate with 8 mm dia tor reinforcrment 100mm c/cand 12mm dia MS bar handle on top of cover on ground level, 20 mm dia GI watering pipe, funnel, etc. complete and testing resistance in completion all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender