Tender For Provn Of Sliding Gate, Construction Of Reinforced Cement Concrete Boundary Wall And Allied Infrastructure At Entry/Exit Gates At 17Wg At Af Stn Gorakhpur
Tender Value
1.83 Crore
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
2.58 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Sliding Gate, Construction Of Reinforced Cement Concrete Boundary Wall And Allied Infrastructure At Entry/Exit Gates At 17Wg At Af Stn Gorakhpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Jun-2026 | Corrigendum No 01 | Other | 22-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Lump sum price worked out by the contractor as per showm on drawing for BUILDING WORKS as listed in Sch ‘A’ Part I. |
| 2 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Sch 'A' Part II. |
| 3 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part III. |
| 4 | Lump sum price worked out by the contractor for ROAD/PATH/CULVERT/HARDSTANDING as listed in Sch 'A' Part IV. |
| 5 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Sch 'A' Part V. |
| 6 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A' Part VI. |
| 7 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part VII. |
| 8 | Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Sch 'A' Part VIII. |
| 9 | Lump sum price worked out by the contractor for FENCING GATE/BOUNDARY WALL as listed in Sch 'A' Part IX |
| 10 | Lump sum price worked out by the contractor for EARTHWORK as listed in Sch 'A' Part X. |
| 11 | Price item wise worked out by the Contractor for Schedule `A' Part-XII (rate against Srl No. 11.00 to 18.00 shall be quoted by the Contractor) |
| 12 | Supply and fix Geyser Consisting of steel tank 25 Ltr capcity with syphon assembly siphon assembly and heating element 1.5 KW. Suitable size of Tharmosteat, Pressure release valve, Inlet & Outlet indication complete as per company manual complete all as specified and directed Enge in charge |
| 13 | S&F speed bump plastic DA-1005 Dark Eye plastic bump so designed dynamically and compact that it can bear maximum load on it, it is made of ABS plastic material two hyghly reflector mounted on PMMA material selded with AABS base plastic through ultrasonic welding process and then fixed on the speed bumps so that dust and water can not touch's the reflector in side area and that it mountains it festivity of a loing time matalic bolts are used for installatoin on roads, size of speed berm is L = 350mm W = 263mm amd H = 53mm available in yellow and black colour weight 1150gms/Each after taking down existing. |
| 14 | S & F 200 Watt High power LED flood light, PDC housing with IP 66 protection. Heat resistant tempered galss for protection with 5 KV surge protection applicable for area lighting complete with all connected accessores for fixing on High Mast 20 meter height with suitable size of clamps, nut bolts, washers and other connected items all as specified and as directed by EIC. |
| 15 | S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet including MCCB 40 Amps and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed. |
| 16 | Taking down old U/S FPB and Supply, installation, testing and commissioning 3 phase and neutral, 415 volts outdoor type, factory made, free standing on MS angle legs, platform mounting, dust and vermin proof cubical type (Double door type) , fully compartmentalized design with 4 Nos of copper bus bar of 500 Amps capacity. LT Panel to be fabricated from 3.15 mm thick CRCA MS sheet with epoxy polyester powder coating paint of shade Siemens Grey (RAL-7032), each and supply and fixing the following for Offrs Md AccnIncoming(a) MCCB 100 Amps, 35 KA. 3 Phase, 4 pole,adjustable type -01 No(b) Ammeter 96 mm square digital type with selector switch and CT -01 set(c ) Voltmeter 0-500V -01 No digital type 96 mm square with selector switch- 1 set(d) LED indicator lamp(R-Y-B)- 1 setOutgoing(a) MCCB 63 Amp ,35 KA. 3 Phase, 4 pole,adjustable type- 02 No (1 Nos Spare )(b) MCB TPN 16 Amp -40 Amps ,16 KA. 3 Phase, 4 pole,adjustable type - 04 No (1 Nos Spare) |
| 17 | Supply & fix Motorised MS Sliding Gate of size ( 7 Mtrx 3 Mtr ) alonwith Safety Photocell - 1 Pair, Remote control , Flushing Lamp, Push Button, Flushing lamp with Alarm , Magnetic Loop Detector, vertical safety edge sensor, Traffic Light, remote control with receiver, vertical rubber safety edge for Smooth, easy operation, Bottom rail made up of polished bright bar supported with heavy duty I-beam ,Bottom rollers with high precision bearings , Top Nylon guide rollers with bearings are used for smooth operation , Galvanized rack attached to the gate and the pinion on the motor winds the gate open and closed ,Design - Standard Tubular Design Gate Frame - MS tubular section , Internal Members MS tubular section with gap centre to centre 150mm , full height column- MS tubular section , bottom rail - single ctrackms- Polished bright bar 20 mm dia welded over bottom I- Beam -ISMB 100 x50 , bottom rollers- single tracks- heavy duty bottom with dual bearing mechanism for free sligding movement fixed at the bottom members of gate frame. Drive : (i) Impoted make electric motor (ii) Power supply single/Three Phase 50/60 Hz (iii) Inbuilt magnetic limit switch (iv) Inbuilt control panel (v) Protection clause IP-54 (vi) CR certified Emergenct Operation : Rotating release device easy to operated & key protected ( Standard) Push Button ; From inside on full height column Surface finish : Enamel Paint As Per European ,Standard , EN 13241-1:2003+A1.2011,Single Side,Avians Std Design,Surface all as per M/S Avians Innovations technology Pvt. Ltd. drawing & Specification |
| 18 | S&F 1050 mm dia punched tape concertina coil (effective dia 550mm at stretch length of coil 6m) with two handle and spikes at both end of coil with dovetail clips 18 SWG, including razor wire 7 No, 6m length of each wire medium size, barbed length 20mm width 14mm, including 51 pins, 128 nos of clips in each coil including 230gm/Sqm zinc coating on core wire complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender