Buyback with Dismantling of all existing air cooled package unit with pumps, piping and cooling tower etc
2
New Ductable AC installation
Supply and Installation and Testing and commissioning of advanced micro computer based high performance machine air Cooled Packaged Ductable Unit of minimum 8.5 TR capacity having indoor airflow capability of 400CFM per Ton with multiple energy efficient Scroll Compressors inbuilt electric control panel, first charging of R410 A refrigerant DX cooling coil thermostatic expansion valve air filter and blower section blower with motor coils initial charge of compressor oil.Capacity minimum 8.5 TR or Min. 400 CFM TR Make Bluestar or Trane or Carrier or York or Voltas or O General
3
Suction Line
Supply and Installation of hard drawn refrigerant Copper Piping with nitrile insulation on suction line. Make Hariom or Mandev or Maxflow or Indigo or Mrajco Insulation Armacell or Aflex or Supreme. Suction line as per OEM
4
Liquid Line
Liquid line as per OEM
5
Acoustic line
Supplying and fixing of acoustic lining with open cell nitrile rubber having thickness of 15mm.Make Supreme or Aerofoam or A-flex or Armacell
6
Canvass connection
Supply and Fixing of Canvass Connection.
7
Drain Pipe
Supply and Installation of UPVC Drain Pipe.Make Supreme or Astral or Prince (32 mm to 50mm)
8
FRLS and control cables
Supply and installation of FRLS control cable PVC insulated PVC sheathed Steel armoured multistrand copper conductor control cable following size. Make Finolexor RR or Havells or KEI or Polycab 6 Core x 2.5 Sqmm
9
LT copper cable
Supplying laying of XLPE insulated PVC sheathed steel armoured 1.1KV Grade LT Copper Conductor power cable Make Finolex or RR or Havells or KEI or Polycab 4.0 Core x 2.5 Sqmm
10
GI wire
Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required at site.
11
Stand for outdoor unit
Supply and installation of MS stand for outdoor units.
12
Stand for indoor unit
Supply and installation of MS stand for indoor units.
13
Refrigerant gas
Supply & charging of extra Refrigerant gas R410 A
14
Testing
Nitrogen testing, vacuumizing and gas charging.
15
Electrical distribution panel
Design and fabrication and supply and installation of cubical type dead front Electrical distribution Panel made out of 14G CRCA sheet with suitable MCCBs, TPN and internal wiring etc. and instrumentation for minimum 11 TR X 4 Nos Package units as per standard make. The unit shall have sequential controller for operating 3 units. Note All the switchgears installed in the Electrical distribution panel of air-conditioning units shall be of ABB or SIEMENS or SCHNEIDER or L&T or TEKNIC make
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
