|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4 fine / coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 2 | Providing and fixing of precast concrete interlocking tiles of desiredshape of M 30 grade manufactured from fully computerizedautomatic stationery hydraulic viebro pressed machine and fullycomputerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with finesand. Laying procedure on compacted sub-base as defined.Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete asper specifications. Tensile splitting strength, abrasion and brakingload etc. as per BS 6717:2001, Grey cement.80mm thick |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.with exe.wall |
| 4 | Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 5 | Random rubble dry stone Kharanja (soling) under floor. |
| 6 | Brick work with FPS bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4 (1 cement : 4 fine/ coarse sand) |
| 9 | Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . including Providing/mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar. 75mm thick. |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 11 | Painting two coats on specified surface with synthetic enamel paint of approved brand and shade, after thorough cleaning and necessary filling to give even shade as per clause 803 of MoRT&H Specification including all material, labour.On new plastered concrete surface |
| 12 | On steel surface |
| 13 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and directionof Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.)Red sand stone. |
| 14 | Trenching in specified soil upto a depth of 60 cm. including removal and stacking of serviceable materials and then disposal by spreading and neatly leveling within a lead of 50 metres and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and farm-yard manure before and after flooding with water (excluding cost of imported earth and sludge or farm-yard manure). |
| 15 | Clearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201. |
| 16 | Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km) |
| 17 | Supplying and stacking good earth at site of work.Note: 1) Loading, unloading and carriage to be paid extra as per actual lead. 2) Earth measured in stacks will be reduced by 20% foe payment |
| 18 | Carriage of materials mechanical transport including loading, unloading and stacking Earth upto 2 kms load. |
| 19 | Half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metres, and height 1.2 metres, above ground and 0.20 metre below ground, bottom two courses laid dry, and top three courses in cement mortar 1:6 ( 1 cement 6 sand) and the intermediate courses being in dry honey comb masonry, as per design complete. |
| 20 | Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. |
| 21 | Preparation of beds for bedding and (shrubbary) hedge/ ground cover by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cms. Refilling the excavated earth after breaking clods & mixing with manure in the ratio 8:1 (8 parts of stacked volume of earth after reduction by 20% one parts of stacking volume of manure after reduction by 8% flooding with water filling with earth if necessary (Cost of manure or extra good earth i to be paid separately) |
| 22 | Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 600 mm min.height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in theground, mixing the soil with decayed farm yard/sludge manure,backfilling the hole watering etc as required. Agave with 10-12 leaves (Kamal Cactus) |
| 23 | Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 600 mm min.height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in theground, mixing the soil with decayed farm yard/sludge manure,backfilling the hole watering etc as required. Phonenix sylvertris ( Date Palm) |
| 24 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfillingthe hole watering etc as required. Plumeria alba ( Champa) |
| 25 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfillingthe hole watering etc as required. Gulmohar(Delonix regia) |
| 26 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Neem(Azadirachta indica) |
| 27 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Jacaranda mimosifolia (Neelli Gulmohar |
| 28 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfillingthe hole watering etc as required. Bauhinia blakeana (Arckid) |
| 29 | Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Morning glory (Ipomea) |
| 30 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 40 mm |
| 31 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6 A to 32 A rating |
| 32 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 50/63 A rating |
| 33 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type TPN phase selector Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with 100 amp. insulated copper bus bar/ shorting link , neutral link, earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet provided with 3 nos 63 Amp rotary switches,3 nos rocker switches for phase identifications etc. making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4Way(Incomer 8,Outgoing 4+4+4) |
| 34 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type TPN phase selector Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with 100 amp. insulated copper bus bar/ shorting link , neutral link, earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet provided with 3 nos 63 Amp rotary switches,3 nos rocker switches for phase identifications etc. making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR)12Way(Incomer 8,Outgoing 12+12+12) |
| 35 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4sqmm, 3core arm |
| 36 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 10 sqmm, 4 core arm |
| 37 | Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor >0.95 ,driver Efficiency >85% , THD(I) <10% , driver current <1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min >=4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index >70 and CCT 5700K ±355K. Driver current <1000mA shown in LM79 report. Fixture shall be IS 10322 Compliant. All as per pre approved by Engineer in-charge. High Power LED Flood Light 30W |
| 38 | Decorative haritage pole in 4 Meter height. Pole upper section of length 3mtr is of dia 76mm and 1 meter bottom section of dia 114mm with decorative casting with base plate as per drawing. Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover.Complete in all aspects with foundation bolts. |
| 39 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR. 75 mm OD 6 kg / cm2 |
| 40 | SITC of Single Stage, water cooled, High Speed (2880 RPM), Horizontal, Centrifugal, Openwell Submersible pumps set pre filled with coolent water and fitted with mechanical seal - T/C Vs T/C, Thrust bearing shall be of carbon + S.S.The stator body of single phase pump shall be of SS and rest of all shall be of cast iron. All casting parts should be cathod electro deposition (CED) coated and other construction material should be confirming to IS : 14220: 2018 . The overall performance of pump shall confirm to BEE energy efficiency level of 3 star. Valid BEE certificate from OEM must be submitted for the same. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011, including making connection etc as required complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 5.0 HP, 3-Ø, (14 -28) Mtr, (995-500) LPMM |
| 41 | Providing & installation of penguin dustbin with following specification For :PENGUINHEIGHT 1.3 Mtr.It should be made by Fiber Glass Reinforced Plastic with 3.0 mm FRP thickness overall and thickness should be made by 2 layers of 450 gsm roving mat and suspend in unsupported resin in pigment with promoter and exalter. Gelcote proposed with using color take pigment of Multy color. Height Should be 1.3 mtr. And capacity should be 100 liter for penguin shape and 90 liter for rabbit shape. |
| 42 | Providing & installation of Rabbit duston with following specification For : RABBITHEIGHT 1.2 Mtr.It should be made by Fiber Glass Reinforced Plastic with 3.0 mm FRP thickness overall and thickness should be made by 2 layers of 450 gsm roving mat and suspend in unsupported resin in pigment with promoter and exalter. Gelcote proposed with using color take pigment of Multy color. Height Should be 1.3 mtr. And capacity should be 100 liter for penguin shape and 90 liter for rabbit shape. |
| 43 | ONE SEATING AND ONE STANDING TWISTER Supply, installation, testing and commissioning of Type: 3 Seater Outdoor Twister Material: MS Steel Pipe Pipe Size: Main pipe: 114 mm diaSeat support: 48 mm diaSeat Material: FRP / MS with powder coating Finish: Outdoor powder coated paint Height: 1.4–1.6 m Dia Size: 1.2–1.8 m Capacity: 3 Users RCC footing recommended Approx footing: 450×450×600 mm |
| 44 | TWISTER TWO WAY Supply, installation, testing and commissioning of Material: Heavy Duty MS Steel Main Pipe: 114 mm dia MS pipe Support Pipe: 48–60 mm dia Seat: FRP / Rubber coated MS Finish: Outdoor powder coating Bearing: Heavy duty sealed bearing User Capacity: 1–3 persons Height: 1.8–2.1 m Width: 1.2–1.8 m Length: 1.5–2.2 mRCC footing requiredTypical footing size:450×450×600 mm minimum M20 concrete recommended |
| 45 | SKI TRAINER Supply, installation, testing and commissioning of Material: Heavy Duty MS Steel Main Pole: 114 mm dia pipe Support Pipe: 48–60 mm dia Seat Material: FRP / Rubber coated MS Finish: Outdoor powder coated paint Bearing Type: Heavy duty sealed bearing Capacity: 2 Persons Height: 1.6–2.0 m Width: 1.0–1.5 m Length: 1.2–1.8 m Typical footing size: 450×450×600 mm PCC + M20 concrete base |
| 46 | PENDULUM Supply, installation, testing and commissioning of Material: Heavy Duty MS SteelMain Pole: 114–140 mm dia MS pipe Secondary Pipe: 48–60 mm dia Seat Material: FRP / Rubber coated MS Finish: Outdoor powder coatingBearing Type: Heavy duty sealed bearing User Capacity: 4–8 persons Height: 2.0–2.5 m Width: 2.0–3.5 m Length: 2.0–3.5 m Typical footing: 600×600×750 mm minimum M20 concrete recommended |
| 47 | FUN RIDER Supply, installation, testing and commissioning of Material: Heavy Duty MS SteelMain Pipe: 114 mm dia MS pipe Secondary Pipe: 48–60 mm dia Seat Material: FRP / Rubber coated MS Handle: Powder coated steel handle Bearing: Heavy duty sealed bearingFinish: Outdoor powder coated paint User Capacity: 2 Persons Height: 1.5–1.8 mWidth: 1.2–1.8 mLength: 1.5–2.0 m Typical footing size: 450×450×600 mm M20 concrete base |
| 48 | STEP TRAINER Supply, installation, testing and commissioning of Material: Heavy Duty MS SteelMain Pipe: 114 mm dia MS pipeSupport Pipe: 48–60 mm dia Foot Pedal: Anti-skid MS/FRP pedalHandle: Powder coated steel Bearing: Heavy duty sealed bearingFinish: Outdoor powder coated paint User Capacity: 1–2 persons Height: 1.8–2.2 mWidth: 0.8–1.2 mLength: 1.2–1.8 m Typical footing: 450×450×600 mm minimumM20 concrete base |
| 49 | cast iron bench Supply, installation, testing and commissioning of Seating Capacity: 3 Persons Frame Material: Cast Iron / Ductile Iron / MS Seat & Backrest: Wooden / WPC / FRP slats Finish: Black enamel paint on frame PU polish / weather coating on wood Length: 1500–1800 mm Width: 550–700 mm Height: 800–950 mm Seat Height: 430–450 mm Cast Iron side supports Rust resistant outdoor coating Hardwood / WPC stripsThickness: 25–40 mm |
| 50 | MALTIPAL STATION Supply, installation, testing and commissioning of Multi Station Outdoor Gym equipment manufactured from heavy duty MS steel pipe structure with outdoor powder coated finish, complete with all accessories, bearings, FRP/MS seats, handles, foundation bolts, RCC foundation, excavation, grouting and fixing complete in all respects as approved by Engineer In-charge. Main Pipe: 114 mm dia heavy duty MS pipeSecondary Pipe: 48–60 mm dia MS pipe Pipe Thickness: 2.5–4 mmFinish: UV resistant outdoor powder coating Seat Material: FRP / Rubber coated MS Bearing Type: Heavy duty sealed bearingsFasteners: Stainless steel / zinc coated Height: 2.0–2.5 m Width: 2.5–3.5 m Length: 2.5–3.5 m Approx footing size: 600×600×750 mm minimum Including excavation, PCC, grouting and curing completeUser Capacity: 4–8 persons |
| 51 | CHAIN SWING Providing and fixing Chain Swing made of heavy duty MS steel pipe structure with powder coated finish, complete with swing seat, galvanized chain, RCC foundation, excavation, grouting and installation complete.”Frame Material: Heavy Duty MS Steel Pipe Main Pipe: 76–114 mm dia Cross Beam: Heavy duty MS/GI pipe Seat Type: Rubber seat / FRP seat Child-safe edge finish Chain: Galvanized iron chainPVC coated optional Finish: Outdoor powder coated paintAnti-rust treatmentHeight: 2.1–2.5 mWidth: 1.8–3.5 m Length: 1.5–2.5 m Typical footing size: 450×450×600 mm minimumM20 concrete base |
| 52 | MARRY GO ROUND Providing and fixing Merry Go Round made of heavy duty MS steel structure with anti-skid platform, powder coated finish, heavy duty bearing system, RCC foundation and complete installation work.Material: Heavy Duty MS Steel Platform: Anti-skid chequered plate / FRPSeating: MS/FRP seats with handles Center Shaft: Heavy duty rotating shaft Bearing Type: Sealed heavy duty bearingFinish: Outdoor powder coatingAnti-rust treatment Diameter: 1.2–2.0 m Height: 700–1000 mm Typical footing:450×450×600 mm minimumM20 concrete recommended |
| 53 | SLAIDE Providing and fixing Playground Slide made of heavy duty MS steel structure with FRP/Stainless Steel sliding surface, ladder, handrails, powder coated finish, RCC foundation and complete installation work Material: Heavy Duty MS Steel / FRP Ladder: MS pipe with anti-skid steps Slide Sheet:Stainless Steel / FRP sheet Side Panels: FRP/MS safety panelsFinish: Outdoor powder coatingAnti-rust treatment Height: 1.5–2.5 m Width: 0.6–1.0 mLength: 2.0–4.0 m Typical footing:450×450×600 mm minimumM20 concrete baseSafety Features |
| 54 | ARTIFICAL STONE Providing and fixing artificial decorative stone/rock made of FRP/GFRC with natural texture finish including fixing, foundation and complete installation work Material: FRP (Fiber Reinforced Plastic) GFRC Artificial concrete rock finish Finish:Natural stone textureWeather resistant coatingColor: Grey BrownSandstone finish Natural rock shades Small: 300–600 mmMedium: 600–1200 mmLarge: 1200–2500 mm PCC/RCC base fixingAdhesive/anchor fixing as requiredLandscape integration with grass & pebbles Please Enable Macros to View BoQ information |
