Tender For Repair/ Maintenance To Aluminium Works, Brick Works, Plastering, Flooring, Plinth Protection, Wall Panelling, Hard Standing And Other Connected Works At Base Hosp, Cmdc, Echs, Soi, Surya Auditorium, Punnit Dutt Auditorium And Other Area Of
Tender Value
49 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
2 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Aluminium Works, Brick Works, Plastering, Flooring, Plinth Protection, Wall Panelling, Hard Standing And Other Connected Works At Base Hosp, Cmdc, Echs, Soi, Surya Auditorium, Punnit Dutt Auditorium And Other Area Of Age E/M (Hosp) Under Ge E/M Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge |
| 2 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Taking down shutters of any description area n exc 1 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description area exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 7 | S&F plain solid, straight chowkhat & frames of 2nd class HW (Hollock) wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkats & treated with coal tar complete all as specified and directed. |
| 8 | S&F 25 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 9 | S&F 30 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 10 | S&F 35 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 11 | S&F 30 mm thick 2nd class hard wood Glazed and Skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed. |
| 12 | S&F steel windows with side hung shutters including hinges with steel handle, and steel peg stay, complete with and including both glazing and gauge shutters to receive glass and wire mesh, dovetailed or welded complete all as specified and directed. |
| 13 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 14 | S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed. |
| 15 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed. |
| 16 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed. |
| 17 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed. |
| 18 | S&F 75 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed. |
| 19 | S&F 100 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed. |
| 20 | S&F 125 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 21 | S&F 150 mm floor door stopper of aluminium alloy body and tonged, anodised with hard drawn steel spring, complete all as specified and directed. |
| 22 | S&F in repair 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed. |
| 23 | S&F in repair 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed. |
| 24 | S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed. |
| 25 | S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed. |
| 26 | S&F in repair 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed. |
| 27 | S&F in repair 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed. |
| 28 | S&F in repair 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 29 | S&F in repair for 150 mm floor door stopper of aluminium alloy body and tonged, anodised with hard drawn steel spring, complete all as specified and directed. |
| 30 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed. |
| 31 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed. |
| 32 | Hacking out old broken glass, any thickness, size, quality, or description, from frame n.exc 1.5 Sqm each pane, complete all as specified and directed. |
| 33 | S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading n.exc 0.5 Sqm each pane, complete all as specified and directed. |
| 34 | S&F 3.0 mm thick figured glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading n.exc 0.5 Sqm each pane, complete all as specified and directed. |
| 35 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading exc 0.5 Sqm each pane, complete all as specified and directed. |
| 36 | S&F in repair 12 mm thick toughened glass door with or without frosted and decorative as directed of selected quality in single / double leaf door with and including all necessary fixing arrangement like SS clamp / clips, arrangements for fixing of floor spring, SS handle (2 Nos in each leaf), SS lock with locking arrangements etc, including making good the wall surfaces as per existing conditions complete all as specified and directed. Note:- floor spring measured and paid separately. |
| 37 | S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass |
| 38 | M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 39 | M&L for Repairing of existing toughened glass door single leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down old door, tightening of top & bottom patch, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 40 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. (Note:- floor spring will be suitable for toughened glass door up to 1.25 m wide shuters) |
| 41 | S&F in repairs Aluminium body (extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed. |
| 42 | S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size of brass body, complete all as specified and directed. |
| 43 | S&F aluminium anodised sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, partially glazed with 4.8 mm thick tinted glass panes and panelled with 3 mm thick Aluminium composite panel, 100 mm butt hinges (3 Nos in each shutters), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed. |
| 44 | S&F powder coated aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neoprene rubber beading, PVC packing, partially glazed with 4.8 mm thick tinted glass panes and panelled with 3 mm thick Aluminium composite panel, 100 mm butt hinges (3 Nos in each shutters), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed. |
| 45 | S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm) |
| 46 | S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm) |
| 47 | S&F aluminium anodised sections fixed and openable windows shutters with frames duly fitted with neoprene beading, glazing clips, locking device, 4mm thick glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2 mm) |
| 48 | S&F aluminium sections powder coated sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm) |
| 49 | S&F in repairs aluminium anodized grill weight of 3.13 Kg per Sqm (min) with suitable aluminium anodized frame of F/H section of 0.297 Kg per Meter (min) with suitable fixing screws / attachment etc complete all as specified and directed. |
| 50 | S&F in repairs aluminium powder coated grill weight of 3.13 Kg per Sqm (min) with suitable aluminium anodized frame of F/H section of 0.297 Kg per Meter (min) with suitable fixing screws / attachment etc complete all as specified and directed. |
| 51 | S&F in repair aluminium anodised partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly panelled with 3 mm thick aluminium composite panel including glazing clip, rubber bead, fixed in position as per stander practice complete all as directed by the Engineer-in-Charge. |
| 52 | S&F in repair aluminium powder coated partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly panelled with 3 mm thick aluminium composite panel including glazing clip, rubber bead, fixed in position as per stander practice complete all as directed by the Engineer-in-Charge. |
| 53 | S&F in repair door comprising frame fabricated with aluminium tube with wall thickness 2 mm, shutter frame with C type aluminium section 25 mm size of 2 mm wall thickness, door panel of 3 mm thick aluminium composite panel and neoprene rubber beading as specified and directed by EIC |
| 54 | S&F in repair curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed. |
| 55 | S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of existing ceiling, complete all as specified directed by the Engineer-in-Charge Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 56 | M&L for seamless ceiling comprising of Gypsum Board 12 mm thick in ceiling fixed with screw or as per manufacturers instructions, with necessary jointing and taping, and applying two coat oil bound distemper over one coat primer fixed over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including applying 2 coat distemper oil emulsion over 2 mm thick cement base putty including dismantling of existing ceiling, complete all as specified and directed.Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 57 | M&L for repairing of false ceiling by taking down old ceiling tiles / board, making the grid in true alignments and true level by adjustment hanging wires, Re-fixing of existing ceilings board & tiles including replacement of hanging wires wherever required at all height complete all as specified and directed.Note:- Ceiling tiles / board wherever found damaged shall be replace and will measured & paid separately. Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 58 | M&L of false ceiling at any height with 600 mm x 600 mm x 15 mm thick micro looks mineral fibre ceiling tiles, fixed on and including exposed grid systems with 15 mm wide T-section flanges. The frame work comprises of main runner of size 15 x 32 x 3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200 mm maximum centre. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450 mm from the adjacent wall flush fitting 1200mm long cross tees of size 14 x 26 x 1200 mm to be interlocked between main runners at 600 mm centres to form a 1200 mm x 600 mm module, cut cross tees longer than that 600 mm to be supported independently 600mm x 600mm modules to be formed by fittings 600mm long flush fitting cross tees of size 15 x 26 x 600mm centrally between the 1200 mm cross tees perimeter wall angle of size 19 x 19x 3000mm secured to wall 450mm maximum centres, including dismantling of existing ceiling, complete all as specified and directed.Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 59 | M&L for Super heavy series PVC Wall panelling (Solid) consisting of 5-8 mm thick Plain / wood colour PVC sheet of approved coloured & pattern, fixed on walls as per manufactures instruction including dismantling of existing panelling complete all as specified & directed. |
| 60 | S&F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 61 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 62 | M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge. |
| 63 | M&L for Brick work in half brick thick wall with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 65 | M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 66 | M&L for plain cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops or similar work rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge. |
| 67 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 68 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, as plinth protection / path and the like, finished even and smooth without using extra cement all as specified and as directed. |
| 69 | Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified. |
| 70 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified.Note:- Waterproofing compound will be measured and paid separately. |
| 71 | M&L for rendering 15 mm thick on stone masonry wall surface in cement mortar 1:6, finished even and smooth without using extra cement all as specified and directed |
| 72 | M&L for rendering 10 mm thick on stone masonry wall surface in cement mortar (1:6), finished even and smooth without using extra cement all as specified and directed |
| 73 | M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement. |
| 74 | M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge |
| 75 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (first Quality) over one coat of primer over and including 2 mm to 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge. |
| 76 | M&L for preparation of new plastered surface of walls and applying two coats 100% Premium acrylic emulsion exterior paint over one coat primer including 1 mm thick exterior grade wall care putty complete all as specified and directed. |
| 77 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of any tint/shade complete all as specified and directed. |
| 78 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 5 Km Please Enable Macros to View BoQ information |
| 79 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 5 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender