|
| 1 | Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights etc in its position, testing all the components / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc all as directed by Engr-in-charge.Note: (i) The rate against the item no 2 to 56 above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative (supervisor) will report to concerned JE E/M at 0900hrs daily to collect the list of complaints and will submit the completion report on the same day before 1700hrs to the JE E/M.(iv) The contractor shall address all the given complaints within 24 hours from the time the list of complaints is handed over to him / his rep by the concerned JE E/M. In case the complaint is not addressed for whatsoever reason within the specified time limit (48 hrs), an amount of Rs 100/- per such complaint per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at JCOs / ORs/ Followers MD Accns (04 x teams).(v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for.(vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below. (vii) During the contract period, if the same complaint is repeated, it will be regarded as a single complaint, and no additional payment will be made for addressing the repeated issue. |
| 2 | Supply only PVC / polycarbonate lamp holders batten/Angle type complete all as specified and as directed. |
| 3 | Supply only of switch piano flush type 6 Amps SP one way complete all as specified and as directed. |
| 4 | Supply only switch piano flush type 6 Amps SP two way complete all as specified and as directed. |
| 5 | Supply only bell push, flush type 6 Amps complete all as specified and as directed. |
| 6 | Supply only pendent (Bed) switch 6 amps single phase complete all as specified and as directed. |
| 7 | Supply only socket 5/6 Amps flush mounted 5 pin complete all as specified and as directed. |
| 8 | Supply only socket 5/6 Amps flush mounted 2 pin complete all as specified and as directed. |
| 9 | Supply only switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed. |
| 10 | Supply only switch socket combination with box of 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed. |
| 11 | Supply only fan regulator switch/socket type electronic step type suitable for 1200/1400 mm sweep fan complete all as specified and as directed. |
| 12 | Supply only switch piano type 20 Amps SP one way complete all as specified and as directed. |
| 13 | Supply only socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and as directed. |
| 14 | Supply only switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and as directed. |
| 15 | Supply only switch socket combination with box of5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and as directed.. |
| 16 | Supply only ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 17 | Supply only plug top 3 pin, 6 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 18 | Supply only plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and as directed. |
| 19 | Supply only plug top 2 pin, 6 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 20 | Supply only metal clad sockets 20 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 21 | Supply only metal clad plugs 20 amps, 230 volts, ISI marked heavy duty connection cord complete all as specified and as directed. |
| 22 | Supply only door bell AC 230 volts single phase ding dong type complete all as specified and as directed. |
| 23 | Supply only wire less door bell AC 230 volts single phase ding dong type complete all as specified and as directed. |
| 24 | Supply only PVC unbreakable surface boxes of 1 gang box complete all as specified and as directed. |
| 25 | Supply only PVC unbreakable surface boxes of 2 gang box complete all as specified and as directed. |
| 26 | Supply only PVC unbreakable surface boxes of 3 gang box complete all as specified and as directed. |
| 27 | Supply only PVC unbreakable surface boxes of 4 gang box complete all as specified and as directed. |
| 28 | Supply only PVC unbreakable surface boxes of 5 gang box complete all as specified and as directed. |
| 29 | Supply only PVC unbreakable surface boxes of 6 gang box complete all as specified and as directed. |
| 30 | Supply only PVC unbreakable surface boxes of 7 gang box complete all as specified and as directed. |
| 31 | Supply only modular switch piano type 10 amps one way one module complete all as specified and as directed. |
| 32 | Supply only modular switch piano type 10 amps two way one module complete all as specified and as directed. |
| 33 | Supply only modular Bell push, 10 Amp with neon indicator one module complete all as specified and as directed. |
| 34 | Supply only modular switch piano type 20 amps one way one module with neon indicator complete all as specified and as directed. |
| 35 | Supply only modular Socket, 6A - 2/3 pin 2 module complete all as specified and as directed. |
| 36 | Supply only modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and as directed. |
| 37 | Supply only 1 module Blanking plates complete all as specified and as directed. |
| 38 | Supply only modular step type fan regulator 100W, 1/2 module complete all as specified and as directed. |
| 39 | Supply only white cover plate with frame 1 or 2 module complete all as specified and as directed. |
| 40 | Supply only white cover plate with frame 3 module complete all as specified and as directed. |
| 41 | Supply only white cover plate with frame 4 module complete all as specified and as directed. |
| 42 | Supply only white cover plate with frame 6 module complete all as specified and as directed. |
| 43 | Supply only white cover plate with frame 8 module complete all as specified and as directed. |
| 44 | Supply only white cover plate with frame 12 module complete all as specified and as directed. |
| 45 | Supply only white cover plate with frame 16 module complete all as specified and as directed. |
| 46 | Supply only white cover plate with frame 18 module complete all as specified and as directed. |
| 47 | Supply only PVC unbreakable surface boxes suitable for modular switches 1 or 2 module complete all as specified and as directed. |
| 48 | Supply only PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and as directed. |
| 49 | Supply only PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and as directed. |
| 50 | Supply only PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and as directed. |
| 51 | Supply only PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and as directed. |
| 52 | Supply only PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and as directed. |
| 53 | Supply only PVC unbreakable surface boxes suitable for modular switches 16 module complete all as specified and as directed. |
| 54 | Supply only PVC unbreakable surface boxes suitable for modular switches 18 module complete all as specified and as directed. |
| 55 | Supply only square box, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 56 | Supply only round plate, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 57 | S&F in repair of PVC insulated copper cable 1 Sqmm 3 core, served with inner sheathing of PVC tape and overall PVC sheathed including PVC Conduit ISI Marked 20mm including all necessary bends, couplings, tees, and other accessories.Surface Saddling of PVC Conduit on Wall using approved saddles and fixing screws. Spacing as per specifications ( 1-meter intervals) complete all as specified and as directed. |
| 58 | All as per item no.57 above ,but 2,5 Sqmm 3 core |
| 59 | All as per item no.57 above, but 4 Sqmm 3 core |
| 60 | S&F in repair of 1100 volts grade heavy duty service cable 2.5 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed including PVC Conduit ISI Marked 20mm including all necessary bends, couplings, tees, and other accessories. Surface Saddling of PVC Conduit on Wall using approved saddles and fixing screws. Spacing as per specifications ( 1-meter intervals)complete all as specified and as directed. |
| 61 | All as per item no.60 above, but 4 Sqmm 2 core |
| 62 | Supply only 9 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 63 | Supply only 5 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 64 | Supply only 3 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 65 | Supply only 0.5 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed. |
| 66 | S&F in replacement of 10 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 67 | S&F in replacement of 20 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 68 | S&F in replacement of 20 watt,230V 3 IN 1 surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 69 | S&F in replacement of 20 watt,230V surface and wall mounted Inverter LED batten, automatically switched ON during a power cut and runs effectively up to 3 Hrs, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 70 | S&F in replacement of 36 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 71 | S&F in replacement recess type LED Down light lights 5 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 72 | S&F in replacement recess type LED Down light lights 12 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 73 | S&F in replacement recess type LED Down light lights 18 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 74 | S&F in replacement Surface type LED Down light lights 10 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 75 | S&F in replacement Surface type LED Down light lights 12 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 76 | S&F in replacement Surface type LED Down light lights 30 W Environmental friendly, energy saving, recess mounted down lighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 77 | S&F in replacement COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and as directed. |
| 78 | S&F in replacement of LED building security light fitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment complete all as specified and as directed. |
| 79 | S&F in replacement of 12 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 80 | S&Fin replacement of 9 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 81 | S&F in replacement of Decorative wall mounting Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 82 | S&F in replacement of Decorative hanging table lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 83 | S&F in repair Decorative hanging with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 84 | S&F in replacement surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and as directed.Note: The quoted price shall include the cost of Light and its driver. |
| 85 | S&F in replacement of indoor Profile LED strip of 12 watts/m linear flex , with separate electronic drivers of suitable and IP 65 protection complete ,Single phase, with aluminium profile including mounting on the ceiling as reqd at the site complete all as specified and as directed. Note : Cost of electronic driver will be measured & paid for separately under respective items of Sch 'A' |
| 86 | S&F in repair of outdoor LED strip LED strip of 8 watts/m linear flex, with fixing tape and end cap of suitable and IP 68 protection complete ,Single phase, mounting on the ceiling/wall/piller as reqd at the site complete all as specified and as directed.Note : Cost of electronic driver and aluminium profile will be measured & paid for separately under respective items of Sch 'A' |
| 87 | S&F in repair of aluminium profile with accessories including mounting on the ceiling/wall as reqd at the site complete all as specified and as directed. |
| 88 | S&F in repair of connector outdoor LED strip of 220 V mounting on the ceiling/wall/piller as reqd at the site complete all as specified and as directed. |
| 89 | S&F in repair of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and as directed. |
| 90 | S&F in repair of 200 watt integral SMD LED Highbay luminaire with aluminium reflector light fitting incl with inbuilt electronic drivers, necessary hanging arrangements as per site requirement including taking down the existing one complete all as specified and as directed.Note: 1. Ladders /Cranes shall be used and will be provided by contractor for dismantling /fixing of light fittings at roof and cost for the same is deemed to be included. |
| 91 | S&F in repair of 50 watt integral SMD LED Highbay luminaire with aluminium reflector light fitting inch with inbuilt electronic drivers, necessary hanging arrangements as per site requirement including taking down the existing one complete all as specified and as directed.Note: 1. Ladders /Cranes shall be used and will be provided by contractor for dismantling /fixing of light fittings at roof and cost for the same is deemed to be included. |
| 92 | Supply and Fix of repair Electronic Drivers, suitable for 9W, 10W, 20W, 30W, and 40W LED light/security light fittings, of compatible specifications and make as existing, including all necessary connections, testing, and commissioning, complete all as specified and as directed. |
| 93 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 94 | M&Lrepair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :-One light/Fan point controlled by one way switch 6 Amps 240 volts complete all as specified and as directed. |
| 95 | All as per item no.94 above, but One 3 pin 6 Amps socket out let point on independent board. |
| 96 | All as per item no. 94 above, but One 3 pin 6 Amps socket out let point on same board. |
| 97 | All as per item no. 94 above, but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size. |
| 98 | All as per item no. 94 above, but One light point controlled by Two 2-way switches |
| 99 | M&Lrepair of point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and as directed. |
| 100 | Supply and fixing repair of rigid non-metallic PVC casing capping, double lock type/PVC conduit (ISI marked) of size not less than 25mm, including all necessary accessories (e.g., bends, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring,complete all as specified and as directed.This includes: a) Supply of 25mm or larger rigid non-metallic PVC casing capping/conduit (ISI marked). b) Supply of all necessary accessories (bends, elbows, connectors, saddles, screws, etc.).c )Securing loose wiring within the casing/conduit. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations.f) Testing of the wiring after completion. Notes:Rates shall include the cost of all materials, labour, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 101 | supply and installation of flexible conduit pipes, ivory grey,white in colour, with a minimum internal diameter of 25mm. The conduit shall be of a type suitable for [Specify application, e.g., electrical wiring, data cabling, etc.]. Installation includes cutting, bending (where necessary), and securing the conduit as per the approved design and instructions complete all as specified and as directed. |
| 102 | Supply and fixing repair of rigid non-metallic PVC cable tray , double lock type (ISI marked) of size not less than 80x40mm, including all necessary accessories (e.g.,Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete all as specified and as directed. This includes: a) Supply of80x40mm or larger rigid non-metallic PVC cable tray. b) Supply of all necessary accessories (Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc..c )Securing loose wiring within the cable tray. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations.f) Testing of the wiring after completion. Notes:Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 103 | Taking down Careful dismantling and removal of existing sub-main wiring, including cables, conduits, trunking, and all associated fixtures, regardless of type and size complete all as specified and as directed.This includes all necessary materials and labor to restore the surfaces to their original condition, or to an agreed upon condition.All work shall be carried out in accordance with the Engineer-in-charge's instructions and any relevant project specifications.If the wiring is to be salvaged, great care must be taken during removal. |
| 104 | M&Lrepair of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and as directed. (Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 105 | All as per item no 104 above,but 2 x 2.5Sqmm |
| 106 | All as per item no 104 above,but 2 x 4 Sqmm |
| 107 | All as per item no 104 above,but 2 x 6 Sqmm |
| 108 | All as per item no 104 above,but 2 x 10 Sqmm |
| 109 | M&Lrepair of sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 4 sqmm continuous earth wire complete all as specified and as directed. (Four runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 110 | All as per item no 109 above,but 4 x 6 Sqmm (Four runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 111 | S&F in repair factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and as directed. Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule |
| 112 | S&F inrepair MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete all as specified and as directed.Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced. |
| 113 | All as per item no 112 above, but 08 way SPN DB (Double door) |
| 114 | All as per item no 112 above, but 04 way SPN DB (Single door) |
| 115 | All as per item no 112 above, but 04 way SPN DB (Double door) |
| 116 | All as per item no 112 above, but 02 way SPN DB (Single door) |
| 117 | S&F in repair of MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and as directed. |
| 118 | All as per item no 117 above, but MCCB with rating of 25 to 100 Amps,415Volts 3pole with 16kA breaking capacity |
| 119 | S&F in repair of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and as directed. |
| 120 | S&F in repair of C Curve MCB SPN 32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and as directed. |
| 121 | S&F in repair of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 122 | S&F in repair of C Curve MCB TP 25-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 123 | Supply and fix in repair of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and as directed. |
| 124 | S&F in repair sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessories etc complete all as specified and as directed. |
| 125 | S&F in repair sheet metal enclosures Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps, 240 volts complete with all accessories etc complete all as specified and as directed. |
| 126 | M&L for repair of earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and as directed. |
| 127 | Dismantling and removing rusted louvers suitable for 150/230/300/450/600 mm sweep exhaust fan and S&F in repair of MS louvers duly painted grey coloured suitable for 150/230/300/450/600 mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and as directed. |
| 128 | S&F in repair of GI pipe ceiling fan down rod of 15 mm dia up to 3 feet long for ceiling fan made out of 15 mm dia GI heavy grade pipe fixed on ceiling using suitable clamp including necessary new nut, bolt and washer complete all as specified and as directed. |
| 129 | Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as specified and as directed. |
| 130 | Supply only capacitor of 2.5/4 mfd for ceiling fan/exhaust fan complete all as specified and as directed. |
| 131 | Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for exhaust fan/wall mounted fan complete all as specified and as directed. |
| 132 | Disconnecting and taking down existing unserviceable geyser of 25/50/100 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismantling all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complete all as specified and as directed. Note : 1.Cost of spares such as Thermostate,heating element etc will be measured and paid for separately under respective Item of sch A as supply only. |
| 133 | S&F in repair thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 to 100 ltrs capacity complete all as specified and as directed. |
| 134 | S&F in repair heating element of capacity 2/3 KW of any type and shape suitable for Existing 25 to 100 ltrs capacity geysers complete all as specified and as directed. |
| 135 | S&F in repair flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and as directed. |
| 136 | S&F in repair metallic flexible hot water connection 600/900 mm long including necessary washers suitable for geysers of 25 to 100 ltr capacity complete all as specified and as directed. |
| 137 | S&F in repair of neon lamp indicator square/round type after taking out old including taking down old one complete all as specified and as directed. |
| 138 | S&F in repair NRV valve of size 15mm dia of Brass complete all as specified and as directed. |
| 139 | Removal of the damaged or faulty inner tank from the geyser unit,Supply of a new inner tank of the correct size, material, and specifications, and its installation into the geyser unit. Include all necessary gaskets and seals.Implementation of protective measures to prevent damage to surrounding walls, floors, and fixtures during the inner tank repair complete all as specified and as directed. |
| 140 | Supply and application of Self Adhesive PVC Electrical Insulation Tape, capable of withstanding temperatures up to [100] °C, Dimensions 7.5 m x 18mmx 0.125mm, for insulating high-temperature electrical connections complete all as specified and as directed. |
| 141 | S & F in repair of Solar Water Heating System Flat Plate Collector type, size : (2.0 x 1.0) Mtr based on direct transfer of heat of capacity 100 Ltrs Per day with suitable electric backup of 2 KW complete all as specified and as directed. |
| 142 | M & L for cleaning the hot water insulated tank of 100 ltrs capacity of Solar Water Heating System Flat Plate Collector Type by removing the sludge /foreign material from the tank and rectifying the fault of water leakages complete all as specified and as directed. |
| 143 | M & L for cleaning the Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the mud/algee/foreign materials from the panel on half yearly basis complete all as specified and as directed.Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt. |
| 144 | Supply and install in repair of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr, suitable /compatible to existing system complete all as specified and as directed. Make : Skylark Thermal Energy System as OEM |
| 145 | S & F in repair of composite PEX-AL-PEX pipes as per ASTM F 128-2017 of size inner dia 15 mm and outer dia 20 mm, suitable/compatible to existing system complete all as specified and as directed.Make : Kitec or its equivalent. |
| 146 | Supply and installation of 16mm outer diameter CPVC pipes SDR 11&plain CPVC SDR 11 fittings in trenches, conforming to relevant industry standards for specify application, e.g., hot and cold water distribution, etc. including cutting, jointing using approved CPVC solvent cement, and pressure testing as per specifications complete all as specified and as directed. |
| 147 | S & F in repair of heating element of 3 KW capacity duly ISI marked, 1-ph, 240 volts suitable/compatible to existing solar heating system complete all as specified and as directed. |
| 148 | S & F in repair Brass/Gun Metal Butterfly gate valve of 15 mm dia, ISI marked, suitable/compatible to existing system complete all as specified and as directed. |
| 149 | S & F in repair of SS pipe flange of 15 mm dia or suitable/compatible to existing solar Flat plate collector system including suitable size of nut bolts and washers etc complete all as specified and as directed. |
| 150 | M & L for Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the existing broken glass and cleaning before installing new complete all as specified and as directed. Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt. |
| 151 | S&F 15mm bore bib taps, fancy type, cast chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 152 | S&F in repair of rubber gaskets 15 mm dia or suitable/compatible to existing solar Flat plate collector system complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 153 | S&F in repair of rubber gaskets 15 mm dia or suitable/compatible to existing solar Flat plate collector system complete all as specified and as directed. Please Enable Macros to View BoQ information |
