Engagement of Hydraulic excavator for removing of road side debris etc including its disposal.
2
Providing, laying, watering and compacting WMM with Quarry stone aggregate 53-22.5 mm size and screening 13.2mm size to specified lines, grades and cross section including carriage of material required complete job.
3
Providing and Applying of Tack Coat using Bituminious Emulsion confirming to IS 8887 using emulsion pressure distributor incl prepparing the surface incl cleaning with mechanical broom. MS Emulsion on WBM/WMM surfae @0.4kg/sqm with rapid setting
4
Providing and laying of 50 mm premix Bituminious Macadam base course with Stone aggregate of quality size and grading as specified in CPWD specification and straight run bitumen of grade 80/100 3.5% by weight of total mix incl hot mixing of stone aggregate and bitumen in hot mix plant transporting mixed material and laying with paver finisher to the required level and grade rolling with road roller of 8 to 10 tonnes capacity to achive the required compaction and density 50to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type HOt Mix Plant of 60-90 TPH Capacity incl all Carriage etc Complete job.
5
Providing and laying of 25mm thick Semi Dense asphaltic base Course using mineral aggregate satisfying the gradation set out in specification with 5% binder content by weight of total mix with the aid of hot mix plant and paver finisher incl rolling wit road roller of 8 to 10 tonne capacity to achive the required compaction and density 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
6
Providing and laying 6mm thick coat of seal coat all inclusive complete in all respects as per MORTH Specification.
7
Providing,laying of Khakbajree/Nallah Muck in berms incl dressing, watering and ramming by 8 to 10 tonnes capacity roller including all carriage complete.
8
Providing & laying of RCC spun Pipes incl necessary earthwork in excavation and filling cushion over pipes i/c cost and carriage of all material complete (450mm) Dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
