Tender For Special Repair To Building No P-73 At Sunderbani Mil Stn Under Ge (North) Akhnoor
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
akhnoor → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-73 At Sunderbani Mil Stn Under Ge (North) Akhnoor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2026 | BOQ Corrigendum | BOQ | 07-Jul-2026 |
| 2 | 23-Jun-2026 | Tender Corrigendum | Other | 07-Jul-2026 |
| 3 | 07-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old existing roof treatment including PCC padding of any description mileld if any, plastering, removing existing bitumen felt treatment including brushing, cleaning top surface of roof slab, brooming etc incl disposal off debris from MoD land complete all as specified and directed. |
| 2 | 15mm thick rendering in cement mortar 1:3 on concrete surfaces of roof and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed. |
| 3 | Roof treatment :- Water proofing treatment to RCC roof slab including parapet as under :- (a) 1st Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer. (b) 2nd Course : Applying evenly a tack coat of industrial bitumen grade 85/25 conforming to IS-702 at rate of 1.2 Kg/Sqm. (c) 3rd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints.(d) 4th Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. (i) On Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions to be measured separately. (ii) Coved fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius 75mm shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6). Note : (i) Roof treatment work shall be carried out through approved manufacturers only or through their authorised personal only. |
| 4 | Sunken Floor treatment :-Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as specified and approved including demolition and filling of sunken floor with & including PCC 1:5:10 type E-2 (using 40mm brick aggregate).(a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours.(b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqm. This layer allowed to air cure for 4 Hours.(c) 15mm thick plaster in CM 1:3 mixed with WP compound to be provided while concrete is still green.(d) Joint of/Trap/WC/Soil pipes shall be properly sealed with sealing compound.Note:(a) Concrete for sunken slabs shall be mixed with WP compounds as per manufacturer's instructions. Before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage /dampness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (The rate quoted includes water proofing compound as per manufacturers instructions).(b) Please note that only floor area shall be measured for payment purpose. |
| 5 | Preparation of new or unplastered surface of concrete not otherwise described over 10 cm width or girth and applying two coat of aluminium paint over roof surfaces complete all as specified and directed. |
| 6 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed. |
| 7 | Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 8 | Description all as per Item No 7 above but except brick set in CM 1:6 complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified. |
| 10 | Rendering 15mm thick cement plaster with cement mortar(1:4) on other than fair faces of brick work or stone masonry surfaces or one side of lathing and finished even and smooth without using extra cement but including use of WPC as per manufactures instruction complete all as specified and as directed.Note: WPC to be measured separtely |
| 11 | Rendering 10mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or stone masonry surfaces or one side of lathing and finished even and smooth without using extra cement complete all as specified and as directed. |
| 12 | Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed. |
| 13 | GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as spd and directed. |
| 14 | Applying 3mm thick wall care putty in two layers over newly plastered surfaces of wall, complete all as specified and directed. |
| 15 | Supply liquid water proofing compound all as specified and as directed. |
| 16 | Complete removal of exising treatment of old surfaces all as specified and as directed. |
| 17 | Preparation of new plastered and unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 18 | Preparation of old plastered and unplastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and as directed. |
| 19 | Preparation of new plastered and unplastered surfaces , applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces, complete all as specified and directed.Note:-(i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE.(ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. |
| 20 | Complete removal of old existing treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces, complete all as specified and directed.Note:-(i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE.(ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. |
| 21 | Preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. |
| 22 | Preparation of old decorated surface and applying two coat of Oil bound distemper on ceiling, complete all as speicfied and directed. |
| 23 | Repair to balcony/ Facia and soffit of chajjas etc by taking down old rendering and applying 15 to 20mm thick cement plaster to match the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including preparation of surface and applying two coats of apex as required over one coat of primer including necessary formwork/scaffolding work upto height 7mtr above ground level of bldg complete all as specified and as directed. |
| 24 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed. |
| 25 | Reinforced cement concrete (nominal mix) type B1 1:2:4 using (20mm graded crushed stone aggregatge) for Chajjas/Balcony/Landing work as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. |
| 26 | Formworkrough finished flat concrete surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Vertical , Horizontal or sloping)sides including supports, overhangs, for fair finished surface of concrete etc. complete all as specified and directed. |
| 27 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including supports, overhangs, etc. complete all as specified and directed. |
| 28 | Mild steel bars 10mm dia TMT Bars and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete fixed in repairs all as specified and directed. |
| 29 | Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 30 | Plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub base of floors complete all as specified and directed. |
| 31 | Vitrified ceramic tiles (light shade) 10mm thick (Square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed. |
| 32 | Vitrified ceramic tiles(Light shade)10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade including 10mm thick rendering in cement and sand mortar 1:4, complete all as specified. |
| 33 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 34 | Glazed ceramic tile 450x300x7mm/600x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified. |
| 35 | 18-20mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement mixed with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:4) including cutting, grinding and mirror polishing complete, all as specified and directed. |
| 36 | Ditto' all as per item 35 have-in-before but in dado/skirting etc incl 10 mm thick rendering in CM 1:3 complete all as directed. |
| 37 | Marble work(Makrana white) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting, moulding & polishing laid over & including 20mm thick screed bed in CM 1:6, complete all as specified |
| 38 | 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms, in counter WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite laid over & including 20mm thick screed bed in CM 1:4, inlcudingcutting of hole in two slab for Gas pipe complete all as specified |
| 39 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each and removing from site all as specified and as directed. |
| 40 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) nexc 1.50 sqm complete all as specified and directed. |
| 41 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back fitting of pressed steel frame, complete all as specified and as directed. |
| 42 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back fitting of pressed steel frame, complete all as specified and as directed. |
| 43 | Solid PVC Door/ Almirah/Kitchen/Cupboard frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing. |
| 44 | Factory made solid Panel PVC( door/almirah shutter/cupboard) shutter 30mm thick(wooden texture) (style) consisting of frames made out of MS tubes for tip and bottom rails M.S frames shall be covered with heat channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rails, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/slealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawing. |
| 45 | Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 . Note: Opening for desert cooler will be provided in windows as per requirement of site. |
| 46 | Ditto as per item No.45 above But without glazing bars shutter only complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 . |
| 47 | Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 48 | 35mm thick flush shutters, solid core with particle board exterior grade as per IS 2202 of 199 (Part-I) flush door shall be internally lipped as per clause .8.52.2 of SSR Part-I 2009, complete all as specified & as directed. |
| 49 | 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified. |
| 50 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed, complete all as specified and directed. |
| 51 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. |
| 52 | Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 53 | 200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 54 | 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 55 | Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed all as specified and directed. |
| 56 | Sheet glass ordinary quality, 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed. |
| 57 | Figured glass pin headed type, 4mm thick, glazing with oil putty in squares not exceeding 0.50Sqm in each pane, complete all as specified. |
| 58 | Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed. |
| 59 | Curtain rail, 20mm dia mield Steel,chromium plated fixed with bracket,stops,rollers etc fixed and repairs with side all as specified and directed. |
| 60 | S&F in replacement of Kitchen cabinets of PVC Solid board(wooden texture) size 900mmx750mmx600mm, including partitions, shelves and drawers with brass sliding rails,channels,door handles, door catchers, overall cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated ply coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners, having following specifications: Please Enable Macros to View BoQ information |
| 61 | S&F in replacement of Kitchen cabinets of PVC Solid board(wooden texture) size 900mmx750mmx600mm, including partitions, shelves and drawers with brass sliding rails,channels,door handles, door catchers, overall cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated ply coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners, having following specifications: Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender