Tender For Special Repair To Building No P-47 At Mayur Enclave Under Ge (East) Mathura
Tender Value
45.50 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-47 At Mayur Enclave Under Ge (East) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of existing roof treatment including PCC/ brick tiles, mud phaska, PCC padding ,plastering and APP membrane complete treatment of any thickness and in any position and removing the all demolished material out side of MoD land complete all as specified and directed. |
| 2 | M&L for 40 mm average thick PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) in floors/padding finishing the surface even and smooth with out using extra cement. |
| 3 | M&L APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.5 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 15 gm/sqm) . It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer including cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 4 | M &L for Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; cut and polished over and including 15 mm screed bedding layer in CM 1:6 set jointed and pointed with premium cementious grout of JK or its equivalant and two coat of heat reflective paint of high SRI over and including on PCC tile complete all as specified and directed. |
| 5 | Demolition of brick work of any description and in any position built in CM and removing rubbish upto a distance of n exc 50 mtr all as specified |
| 6 | M&L for brick work with old size burnt clay sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified |
| 7 | Taking down cement plaster from brick wall etc incl racking out joints & hacking out for key and scrubbing down with water all as specified. |
| 8 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick/ concrete surfaces finished the surface even and smooth without using extra cement, using 200 ml water proofing liquid per bag of 50 Kgs cement (but excluding the cost of water proofing liquid). |
| 9 | Supply only water proofing liquid Dr Fixit or equivalent as approved. |
| 10 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed. |
| 11 | M&L for rendering 5 mm thick in CM 1:3 over 10 mm thick in CM 1:4 dubbing coat on ceiling surfaces of concrete finishing the surface even & smooth (without using extra cement) |
| 12 | M&L for Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the Engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. Note :- (i) Debris obtained from chipping of loose/unsound and cracked concrete shall be removed out side of MD land.(ii) Thickness will be measured excluding plaster |
| 13 | M&L for cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry complete all as specified and as directed.Note : - (i) Length of reinforcement bars any dia cleaned of rust all around will be measured for payment. (ii) Thickness will be measured excluding plaster. |
| 14 | M&L for applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system as approved by GE for old and new reinforcement any dia complete all as specified and directed. Note :- Epoxy based passivating, protecting & bonding coat of zinc rich system will be paid separately as separately. |
| 15 | Supply only epoxy based passivating, protecting & bonding coat of zinc rich system primer as approved by GE Note :- Payment will be made for the total weight of resin and hardener in manufactured specified proportion. |
| 16 | Mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material complete all as specified and as directed. Note :- SBR latex shall be measured and paid separately. |
| 17 | Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 3 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and directed.Note :- SBR latex shall be measured and paid separately. |
| 18 | Supply only approved SBR latex for bonding coat/Polymer modified cement mortor complete all as specified and as directed. (Make: Dr Fixit/Fosroc/SIKA)Note: Rate shall be in terms of solid contents of polymer. |
| 19 | M&L for prepartion of new plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint over a coat of acrylic primer over and including a coat of 2mm thick wall care putty scaffolding trestles, ladders, cradels and necessary safety measures complete all as specified. |
| 20 | M&L for preparing new plastered surface of ceiling and applying three coats of white wash all as specified and as directed. |
| 21 | M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over and including a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 22 | M&L for complete removal of old decrative treatments from walls and preperation of old decorative surfaces of wall and applying two coats of weather proof acrylic exterior paint light shade over a coat of primer (100% Acrylic) over 2mm thick wall care putty using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floorcomplete all as specified and as directed. |
| 23 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over and including 2mm thick wall care putty complete all as specified and as directed. |
| 24 | M&l for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 25 | M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and directed by engineer in charge. |
| 26 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 27 | M&L for double charged vitrified tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 28 | All as above, but as in skirting over & including M&L 10 mm thick rendering in CM 1:4 complete all as directed. |
| 29 | M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 4 complete all as specified and as directed. |
| 30 | M&L for Glazed ceramic coloured tiles of size 600x300x7-8mm thick as on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed. |
| 31 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 32 | M&L for 16-18mm thick granite marble stone work (table rubbed and polished) of approved shade and colour black Z or red rubby in steps jambs,window cills, cooking platform and like laid over and including 15 mm thick screed in cement mortar 1:4 pointing in white cement using marble dust with admixture of pigment to match the colour of granite including rounded/ half rounded edges of granite and making hole for gas pipe in RCC shelves complete all as specified and as directed. |
| 33 | Demolition of reinforced cement concrete as in cover slabs/roof slabs/ beams/ columns of any description not otherwise specially provided for (reinforcement cut as required to faciliate demolition) complete all as specified and as directed. |
| 34 | M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 35 | M&L reinforced cement concrete type A-1 (1:1.5:3) using 20 mm graded stone as in slab supported on walls, beams and columns in floor, roof, beams and shelves etc for soak well/septic tank in running and manhole cover slab with plain fair faces and set in CM 1:4 condition complete all specified |
| 36 | M&L form work to soffits of suspended slabs such as roof slabs, landing and similar work n exc 200 mm thick, curved, plain in running condition complete all specified (rough finished surfaces) |
| 37 | Taking up or down15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 38 | S&F steel tubing, medium grade, galvanised 15 mm bore including all fittings fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 39 | M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed |
| 40 | Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed. |
| 41 | S&F steel tubing, medium grade, galvanised 20 mm bore including all fittings fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 42 | S&F rotational moulded, polythene water storage tank Triple layer white in colour (Cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position including dismantling of existing water tank and removing from site complete all as specified and as directed. |
| 43 | S&F ball valve of PTMT high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed. |
| 44 | S&F in repair gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed as specified. |
| 45 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed. |
| 46 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed. |
| 47 | S&F Aluminum powder coated three track sliding windows with three sliding shutters, (One with stainless steel jalli and two with glass panes) aluminum sections not less than 1.10kg per meter for bottom and top tracks and side track 0.98 kg per meter, bottom shutter frame 0.55 kg per meter, top shutter frame 0.55 kg per meter, shutter sides 0.55 kg per meter and interlock sides 0.45 kg per meter including suitable nylon beading, channel, gasket, rollers Maruthi lock with handles etc including cost of 5mm thick tinted sheet glass and stainless steel wire mesh with 0.36mm nominal dia of wire and 1.18mm aperture complete all as specified and directed. |
| 48 | S&F Aluminum powder coated openable windows/ ventilator with two shutters, (One with stainless steel jalli and two with glass panes) side or top hung aluminum sections not less than 1.10kg per meter for bottom and top tracks and side track 0.98 kg per meter, bottom shutter frame 0.55 kg per meter, top shutter frame 0.55 kg per meter, shutter sides 0.55 kg per meter and interlock sides 0.45 kg per meter including suitable nylon beading, channel, gasket, rollers Maruthi lock with handles etc including cost of 5mm thick tinted sheet glass and stainless steel wire mesh with 0.36mm nominal dia of wire and 1.18mm aperture complete all as specified and directed. |
| 49 | S&F powder coated aluminium snap grid of 50mmx50mm aperature of 3mm section including frame and beading, gasket etc complete all as specified and directed. |
| 50 | S&F Solid WPC frame of size 90mm x 45mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 51 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), Calciam Carbonate and natural fibres (wood poder/rice husk/wheat husk) and toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 65 kg/cum and screw withdrawl strength of 1800 N (Face) and 900 N (Edge)/ minimum compressive strength 50N/Sqmm, modulus of elasticity 850 N/sqmm and resistance to spreade of flame of class 'A' category with property of being termite/borer proof/ water/ moisture proof and fire retardant and fixing including with SS butt hinghes of 100 size with necessary full body threaded star headed counter sunk SS Screws etc all as per direction Engr-in-Charge. |
| 52 | S&F Pressed steel frames of size 105x60 mm made out of 2.00 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and as directed. |
| 53 | S&F Pressed steel frames of size 125x60 mm made out of 2.00 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete as specified and as directed. |
| 54 | M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of chowkhats etc complete all as specified and as directed. |
| 55 | S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel prelaminted veneer type (decorative) on both side of approved design and colour complete all as specified and as directed. |
| 56 | S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) all as specified. |
| 57 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 58 | S&F Stainless steel handles, cast type polished bright finish of 200 mm size for door shutters complete all as specified and as directed. Make Global,Hettich,Plantex |
| 59 | S&F stainless steel barrel tower bolts 200mm long of extruded section and fixed complete all as specified and as directed. Make Global,Hettich,Plantex |
| 60 | S&F Stainless steel 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specified and as directed. Make Global,Hettich,Plantex |
| 61 | S&F Stainless steel Butt hinges of size 100mm, medium weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 62 | M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 63 | S&F floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 150 mm complete all as specfied and as directed. |
| 64 | S&F mild steel door spring 300mm, ordinary rat tail rod pattern springsincluding roller and roller plate fixed to pressed steel door frame complete all as specified and as directed. |
| 65 | Dismantling wall and ceiling boards/ Kitchen cabinets/ cupboards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 66 | S & F 18 mm thick WPC board glossy finish at one Side Prelam/ Rigidlam of approved color fixed with screws, solvent cement/ adhesive to make kitchen cabinet/ cupboard shutters, sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- Min 600 Kg/CBM) (Make- Rajshri Plastiwood or equivalent) |
| 67 | S & F 12 mm thick WPC board glossy finish at one Side Prelam/ Rigidlam of approved color fixed with screws, solvent cement/ adhesive to make kitchen cabinet/ cupboard complete as per specifications and as directed by the engineer - in -charge. (Density- Min 600 Kg/CBM) (Make- Rajshri Plastiwood or equivalent) |
| 68 | S & F stainless steel 304 grade kitchen modular basket for storgage of plates cups, grains basket, glass cutlery, bottles etc as per required size, as approved by GE, complete all as specified and directed. Make: Godrej / Hindware / Lifetime |
| 69 | S & F Ball bearing runners 45 mm size Telescopic full extension load capacity 50 kgs, of stainless steel grade SS-304 complete as approved by GE. Make: Kaff / Hettich / Hafele / Godrej |
| 70 | S&F Magnetic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed. Make : KAFF/Godrej/Hettich |
| 71 | S&F stainless steel handles 100 mm size for kitchen cabinet, cupboard shutters, as approved by GE, complete all as specified and directed. |
| 72 | S&F stainless steel hasp and staple 100 mm long, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 73 | S & F Auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters.( Make- KAFF, Godrej & Hettich) |
| 74 | M&L for providing in repair 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, including socket etc with cement joints, laid in trenches or in floors complete all as specified and as directed. |
| 75 | M&L for providing in repair 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, including socket etc with cement joints, laid in trenches or in floors complete all as specified and as directed. |
| 76 | M&L for providing in repair 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,, fixed to walls including clamp of 3mm x25 mm FI and nails to fix at wall complete all as specified and as directed. |
| 77 | M&L for providing in repair 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,, fixed to walls including clamp of 3mm x25 mm FI and nails to fix at wall complete all as specified and as directed. |
| 78 | M&L for providing in repair 100 mm bore Cast iron bends plain or oval acess door of any radius complete all as specified and as directed. |
| 79 | M&L for providing in repair 75 mm bore Cast iron bends plain or oval acess door of any radius complete all as specified and as directed. |
| 80 | M&L for providing in repair 100mm bore Cast iron junction (Single T) equal or unequal complete all as specified and as directed. |
| 81 | M&L for providing in repair 100mm bore cast iron vent cowl complete all as specified and as specified. |
| 82 | M&L for providing in repair 75mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete, all as specified & directed. |
| 83 | M&L in repair single lever WHB mixer 15mm bore cast copper alloy chromium plated 450mm braided connection pipe without pop up complete all as specified and as directed. Make : Jaquar Cat part No KUP-CHR-35011BPM/ Kohler Cat Part No: K-33063IN-4ND-CP ./Cera Cat Part No: F1014451 |
| 84 | S&F in repair cast copper alloy chromium plated Angular cock for 15 mm dia bore iron pipe with wall flange complete all as specified as directed.Make : Make: Jaquar Cat Part No: KUP-CHR-350553PM/ Cera Cat Part No: F-1014201/ Kohler Cat Part No: K-80154IN-4AV-CP . |
| 85 | S&F in repair Bip tap long body cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipe of 15mm bore dia complete all as specified and as directed Make : Make Jaquar Cat Part No: KUP-CHR-35037/ Cera Cat Part No: F-1014152/ Kohler Cat Part No: K-16093IN-4-CP . |
| 86 | S&F in repair Wall Mixer head and hand arrangement combination pattern including Telephonic hand shower, flexible tube and hook connecting legs and wall flanges, crutch etc complete all as specified. Make Jaquar Cat Part No: LYR- 38145/ Cera Cat Part No: F-1014411& F7030102AB/ Kohler Cat Part No: 98754IN-4-CP |
| 87 | S&F in repair cast copper alloy chromiumplated two way Angle cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/Kohler/Cera |
| 88 | S&F in repair two way bib cock cast copper alloy chromium plated superior quality with wall flange fixed to 15mm bore dia iron pipe complete all as specified and as directed. Make: Jaquar Cat part No KUP-CHR-35041PM/ Cera Cat Part No: F-1014161/ Kohler Cat Part No: K-16094IN-CP |
| 89 | S&F in repair Soap dish, of CP brass body and rectangular in shape, fixed to plugs with chromium plated brass screws Make : Jaquar Cat part No AKP-CHR-35731P/Cera Cat Part No: F-5012116CH/ Kohler Cat Part No: K-25069IN-CP |
| 90 | S&F in repair towel rack of 600mm long with lower hangers of approved make complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1181FH/Cera Cat Part No: F-5012101CH/ Kohler Cat Part No: K-25066IN-CP |
| 91 | S&F in repairs stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen incl waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 915mmx460mm bowl and size 410x330x160mm complete all as specified and directed. |
| 92 | S&F in repair sink mixer with EXTENDED swinging spout 450mm long (wall mounted model ) with connecting legs and wall flanges for 15mm bore dia iron pipe complete all as specified and as directed. Make Jaquar Cat Part No FLR-CHR-5309N/ Cera Cat Part No: F-1014501 / Kohler Cat Part- No 37315 IN-4-CP. |
| 93 | S&F in repair Hand jet health faucet 15 mm bore with CP flexible tube 1.2m and all connected fittings complete all as specified and as directed. Make: Jaquar Cat part No ALD-CHR-565GA/ Cera Cat Part No:F-8030116AB/ Kohler Cat Part No: K-12927IN-CP |
| 94 | S&F in repair tolilet paper holder of stainless stell fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make: Jaquar Cat part No AKP-CHR-35753PS/ Cera Cat Part No: F-5007110/ Kohler Cat Part No: K-5633IN-CP |
| 95 | S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and as directed.Make:- Prayag /Commander / Polytuf |
| 96 | S&F in repair S&F in repair designer looking mirror of size not less than 1.0 Sqm,selected quality 5 mm thick, fixed with chromium plated screws complete all as specified and as directed. |
| 97 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and as directed. |
| 98 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 99 | S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. Make: Jaquar/ Cera/ Perryware |
| 100 | S&F in repair tubular towel rail of brass Chromium plated 20mm dia, ‘D’ type 60cm long between flange complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1111/Cera Cat Part No: F-5013104CH/ Kohler Cat Part No: K-25065IN-CP |
| 101 | S&F in repairs PVC flexible waste pipe 32 mm dia for WHB complete all as specified. |
| 102 | S&F in repair CP shower of size 200 mmx 200mm sqaure shape for fixing with 15mm pipe (minimum weight 40gms) with 450mm long CP arm with flange of approved make complete all as specified and as directed. |
| 103 | S&F in repairs glass corner of size 300x300mmx6mm thick, bevelled on edges with two brackets CP complete all as directed. |
| 104 | S&F Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed. |
| 105 | S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including brackets,waste fitting 32 mm brass chromium plated, incudig pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed. |
| 106 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off out of MoD land complete all as directed |
| 107 | M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed. |
| 108 | M&L for PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in coping etc. complete all as specified and as directed. |
| 109 | Dismantling of mild steel work of any description not other wise provided for. |
| 110 | M&L SS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and directed |
| 111 | Dismantling asbestos cement (corrugated or semi-corrugated etc) sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 112 | M&L for Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel (AZ 150) sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 113 | S&F in repairs 2mm thick Fiber reinforced plain sheet of high tensile strength for fixing with MS frame with screw, washer and nut bolt as specified and directed.Note: Colour and design shall be approved by GE(E) Mathura. |
| 114 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and facing horizontal face to groove with cement mortar 1:3 complete all as specified and as directed. |
| 115 | M&L for Mild steel work in trusses, purlins, wind ties, vertical posts of angle channels, hollow sections & flat iron etc including special shaped washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed. |
| 116 | S&F in repair curtain rod stainless steel chromium plated 25mm dia with bracket knobs including end cap complete all as specified and directed. |
| 117 | S&F in repairs stainless steel Grating doom 100mm dia with hole (Minimum weight 25gms) complete all as specified and as directed. |
| 118 | M&L for preparation of primed steel surface of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge |
| 119 | Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.( Note: Credit for above items should be made as per credit Schedule separately) |
| 120 | Taking down carefully by submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge. |
| 121 | Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed |
| 122 | M & L for Point wiring with 1.5 sqmm (nominal area) single core PVC insulated unsheathed (FRLSH) cable, 1100 volts grade, multi-stranded copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20 mm dia med gd) and its all accessories complete concealed in wall and modular flush metal boxes with modular cover plates & frames for mounting modular switches, sockets, regulators etc. including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge, as described below from item 123-128:- |
| 123 | (a) One light point controlled by one switch 5 amp. |
| 124 | (b) One wall/exhaust fan point controlled by one switch 5 amp. |
| 125 | (c) One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 126 | (d) One 5 Amp 5 pin socket outlet point on independent board with other switches including earth wire as specified. |
| 127 | (e) One bell point controlled by one push button. |
| 128 | (f) One light point controlled by two 2-way switches. |
| 129 | All as per item No.122 here-in-above but for 3 pin/ 5 pin, sockets outlet,15 amps with 4.0 sqmm PVC insulated & unsheathed (FRLSH), multi-stranded copper condutor cable, independent, Point wiring complete all as specified and as directed . |
| 130 | Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete. |
| 131 | Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module . |
| 132 | Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified. |
| 133 | Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified. |
| 134 | Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete. |
| 135 | Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified. |
| 136 | Supply & Fixing Modular fan Regulator electronic step type complete all as specified. |
| 137 | Supply and fix in replacement Bell Ding dong type, 230 Volts complete with connection. |
| 138 | Supply and fix in repair ceiling rose surface bakelite 65mm x 50mm three terminals complete . |
| 139 | M & L for Sub Main Wiring for DB to DB with two runs single core 10 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(02 run 10 Sq mm single core cable, one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM). |
| 140 | Single pole and neutral Sheet Metal Enclosure with a two pin and earth plug and socket complete with one Double pole MCB 20 amp |
| 141 | M&L vertical load line distribution board factory made and tested made of sheet metal enclosure powder coated suitable for MCCB 125A triple pole and neutral as incomer and outgoing MCBs, 4 way TPN with rated busbar 415 volts,neutral link, Blanking plates (Without MCCB/MCBs) IP 43 (double door type) ISI marked suitable for G Frame MCCB 100 Amp as incommer of Make: Havells equivalents (Note MCCB Price should be measured and paid seperately) |
| 142 | Supply & fix in replacement of MCCB 3P 125 Amps, breaking cap 25 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed. |
| 143 | S&F MCB distribution board, SPN 12 way, double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified. |
| 144 | S&F MCB SPN, 40-63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed. |
| 145 | S&F MCB SP, 6-32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender