Tender For Addition Alteration To Kulkarni Point Near Building No P - 287 (Scom) Under Ge Dronachal
Tender Value
8.97 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
2 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dronachal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Kulkarni Point Near Building No P - 287 (Scom) Under Ge Dronachal
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Stone Slabs, Tiles/ Paver Block of any thickness and dimension of any description or thickness in floors or aprons laid dry or laid bedded in any Mortar complete all as specified and as directed by Engineer-in-Charge |
| 2 | Material and Labour for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate), 100 mm Concrete as in Sub Base Finished even and Rough complete all as specified and as directed By Engineer-in-Charge |
| 3 | Material and Labour for Full Body Vitrified Parking Tiles of Area equal to Exceeding 0.36 Sqm and Thickness of Tiles 16 mm including 20 mm screed bed in CM 1:3 complete all as specified and as directed. (Parking Tiles will be selected from the Parking Tiles Catalogue of the approved Brand for Parking Tiles.) |
| 4 | Material and Labor for Removing any kind of cladding, Panelling of any Material, removal of any other fixtures or ornamentals items Etc and cleaning the surface by Wire Brushes and Supply and Fix 16 to 18 mm thick, Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size equal to or exceeding 0.25 Sqm but not exceeding 0.5 sqm area fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and as directed by Engineer-in-Charge |
| 5 | M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (Water proofing compound measured and paid seperately) |
| 6 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft Disintegrated Rocks complete all as specified and as direcetd by Engineer-in-Charge |
| 7 | Fixing only Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness or any other thickness, M-35 Grade or those available from the dismantling, Including transportation of the dismantled paver block from one location to the desired location as directed by Engineer-in Charge, complete all as specified and as directed by Engineer-in Charge |
| 8 | Material and labour for sand filling under floor or in foundation including watering and consolidation completed all as specified (Note:- Sand cushion layer consolidated thickness is 20 mm below precast interlocking paver block complete all as specified and directed. |
| 9 | M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork. complete all as specified and as directed by Engineer-in-Charge |
| 10 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as directed above the starting point . |
| 11 | Demolition of plain cement concrete of any description and in any position (below and above ground level ) not otherwise specifically provided for complete all as specified and as directed. |
| 12 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 13 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 14 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer in Charge |
| 15 | S & F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 16 | Material and Labour to Fair Finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) → complete all as specified and as directed by Engineer-in-Charge |
| 17 | Material and Labour for Preparation of New Surfaces or old surfaces Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm over external Surface Putty one coat complete all as specified and as directed by Engineer-in-Charge |
| 18 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 all as specified and directed. |
| 19 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender