|
| 1 | Earth Work in Excavation by mechanical means (Hydraulic excavator manual means depth. 15. m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m as directed by |
| 2 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR No. 4.1.8 |
| 3 | Brixk Work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 4 | Reinforced cement concret work in beams, suspended floors, roofshaving slope up to 15 landings, balconies, shelves, chajjas, intels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural soures) 5.3 |
| 5 | Steel reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more DSR No 5.22.6 |
| 6 | Excavating supplying, stacking and filling of local earth (including royality) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, slides offoundation etc. complete for all lift. DSR No. 2.25(a) Toilet Floor Bathroom |
| 7 | Brick Work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 Cement : 6 COARSE SAND) dsr 6.4:2 Foundation Lw swToilet Partion |
| 8 | 12 mm cement plaster of mix 1:6 (1 cement 6 coarse sand) DSR No 13.4.2 |
| 9 | Cement concrete flooring 1.2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25mm thick floor) 11.3:1 |
| 10 | Provoding and laying vertified tiles in skirting in different sizes (thickness to be specified by manufactrurer) with water absorption less than 0.08% and conforming to I.S 15622, of approved make in colours & shade in skiting, rise of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) including grouting the joint with cement & matching Toilet Floor Bathroom |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufactruer) of approved make in all colours, shades except burgundy bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufactrurer, over the plasted wall surface to prepare the surface even and smooth complete |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior |
| 14 | Providing and fixing M.S Tubular frames for doors, windows, ventilators and cupboard with rectangular/L-type sections, made of 1.60 mm thick M.S Sheet, joints mitred, welded and granded finish, with profiles of required size, including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer. Fixing with 15*3 mm lugs 10 cm long embedded in cement concrete brick 15O10O1 cm of C.C 1:3;6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) DSR 10.15.1 |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both35 mm thick including ISI marked Stainless Steel bult hinges with necessary screws |
| 16 | 13.62 Painting with synthetic enamel paint of approved brand and manufactture of required colour to give an ever shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62:1 |
| 17 | Cost of Sainatary Fittings |
| 18 | Cost of Elelectrical Fittings |
| 19 | G.S.T Please Enable Macros to View BoQ information |
