|
| 1 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. P.S. No. 501 (Polycab KEI, Havell's make) |
| 2 | 1) 10 Sq.mm. 4.0 Core (PS No. 501) |
| 3 | 2) 50 sq mm 3 ½” core |
| 4 | 2) 16 Sq.mm. 4.0 Core (PS No. 501) |
| 5 | S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of E/I. P.S No. 504. |
| 6 | a) 10 Sq.mm. |
| 7 | b) 50 Sq.mm. |
| 8 | C) 16 Sq.mm. |
| 9 | S/Laying of 63 mm dia (OD 63 mm & ID 51 mm nominal) size of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench or Trenchless method if required but excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/Time/CPE make. as per DSR 2018 item no. 14.16.1 page no. 49 |
| 10 | Supply and laying of 150mmx150mm bollard Light 12watt made out of executed 3mm aluminium profile with case aluminium fixed with GI fastners on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T & P complete in all respects as per approved design and drawing as approved by architect and engineers-in-charge(AOR) |
| 11 | Supply and laying of IP-67 LED Strip 5 watt as approved design & drawing by architect and engineers-in-charge(AOR) (Make- Philipps/Osram/Wipro) |
| 12 | Supply and laying of IP-67 Focus/ground burial Light 13 watt as approved design & drawing by architect and engineers-in-charge(AOR) (Make - VAK/ NERI/Mayfair/K-lite) |
| 13 | Supply and Installation 4.5 mtr Hight 304SS 16 Gauge lampost dia 13.7m black colour SMD LEDS 75 watt , IP-55. PC 2700K, warm white light , fixed on base plate 12mm thick on RCC foundation including the cost of foundation , foundation bolt,excavation and back filling and required T & P complete in all respects as approved design & drawing by architect and engineers-in-charge(AOR) (Make - VAK/NERI/ Mayfair/K-lite) |
| 14 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing(This will apply for earthing of poles also).as per PS No. 702 |
| 15 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.(P.S. No 725A) |
| 16 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineerin- charge. As per PS No. 710 |
| 17 | Supply and fixing of 25 Amp TPN capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint crossing of time switch TSO 100 series with contractors, HRC fuse, isolating swtich metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respects. as per PS No. 807E |
| 18 | S/E Testing & Commissioning of 63 KVA Al. wound outdoor type Transformer as per ISS. Complete in all respects Make : AZAD/ P.M./ Kanohar/ Paramix as per direction of E/I..(RESPO page no. 51) |
| 19 | Supplying and installing150 mm width X 50 mm depth X 1.6 mm thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. peners including bolts & nuts, painting suspenders etc as required. as per DSR 2018 item no. 4.1.2 page no. 20 |
| 20 | Supplying and installing of 150 mm width X 50 mm depth X 1.6 mm thickness perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. as per DSR 2018 item no. 4.2.2 page no. 21 |
| 21 | Supplying and installing of 150 mm width X 50 mm depth X 1.6 mm thickness perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. uspenders including bolts & nuts, paintingsuspenders etc as required.. as per DSR 2018 item no. 4.3.2 page no. 21 Please Enable Macros to View BoQ information |
