Construction of a big Festival Building/procession House Near the Temple of Mata Purvidevi in Village Maholiya Mundi of Development Block Bhavalkheda
Tender Value
14.78 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
30000
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahjahanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction of a big Festival Building/procession House Near the Temple of Mata Purvidevi in Village Maholiya Mundi of Development Block Bhavalkheda
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement :( 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources |
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.As per 2. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.6 |
| 9 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2 |
| 11 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm th |
| 12 | Providing and applying plaster of paris putti of 2mm thickness over plastered surface to prepare the surface smooth as required for proper completion of work as per DSR 13.26 |
| 13 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon addit |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trench |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction o |
| 16 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR 13.48.3 |
| 17 | Supply and fixing of sign board of size 1.20 x 0.90m with MS sheet of 18BG made of angle iron post 02(nos) of 1.20m in horizontal and 3.05m in vertical of size 40 x 40 x 5mm and flat iron for cross 02 (nos) 40 x 5mm with complete letter writing as per dra |
| 18 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) up to 25% : 4 graded stone aggregate 12.5mm nominal size including |
| 19 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.3 |
| 20 | Supply and Fixation of 4mm thick translucant coloured plastic sheet i.e. cost of all hook bolts with nuts etc as required for proper completion of work |
| 21 | Supply and Fixation of 6mm china white glazed in flooring or stacking dado lade with 1:3 cement and approved coarse sand as per S.I. No 628 |
| 22 | New work (two or more coats) with a base coat of white washing with lime DSR 13.39.1 |
| 23 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR 13.41.1 |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suppor |
| 26 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15MM DSR 18.52.1 |
| 27 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore DSR no.: 18.49.1 |
| 28 | 20.00mm dia nominal bore DSR 18.38.2 |
| 29 | 100mm dia internal dia PVC pipe 6Kg/Sqm |
| 30 | Supply and laying of brick ballast in soak pit (Chapter1) |
| 31 | Supply and laying of brick bats in soak pit (Chapter1) |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore DSR no.: 18.49.1 |
| 33 | Excavation in foundation (with royalty Rs.14.00) SI No.251 |
| 34 | Cartage of boring materials & hire charges |
| 35 | Labour cost on boring: Strainer boring of 150mm Mainpuri SOR Chpt. 22 |
| 36 | Testing of boring to create adequate cavity |
| 37 | P/F 6 kgf/sqcm pvc pipe 100mm dia I.S.I.mark ( Lko. S.O.R.SI No.33 Lett.No.4739 Dt.29.4.08) SI.No.-730 |
| 38 | P/F 6 kgf/sqcm pvc strainer, 100mm dia ( Lko. S.O.R.SI No.33 Lett.No.4739 Dt.29.4.08) SI.No.-730 |
| 39 | Nylon cloth for strainer including plastic rope, cutting holes in PVC pipe etc comp. Mainpuri SOR Chpt. 22 |
| 40 | P/F of 1H. P. Crompton Greaves heavy dyuty, factory fitted ISI marked submersible pump . Mainpuri SOR Chpt. 22 |
| 41 | P/F of panel for 1 H. P., factory fitted,, Submersible pump ISI marked with starter. . Mainpuri SOR Chpt. 22 |
| 42 | P/F of Submersible copper wire, 3 quire E-SOR 289 P |
| 43 | P/F of 32mm dia GI pipe (B Class) Mainpuri SOR Chpt. 21 |
| 44 | P/F of Kent Submersible cable grade 1100V E-SOR 289 |
| 45 | P/F of 32 mm dia,5cm thick & 30 cm long MS Clamp Mainpuri SOR Chpt. 22 |
| 46 | Wiring point for light 1.0 Sqr mm FRLSH PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sqm. FRLSH insulated copper conductor cable as earth continuity wire, piano type switch & ceiling rose/angle/battern holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respect as directed including matching colour wash.SI No. 131C |
| 47 | Wiring point for Plug (5A) 1.0 Sqmm FR L.S.H. PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sq mm PVC insulated multistrand copper conductor cable earth continuity wire ,piano type switch & socket on 3mm thick phenolic backelite sheet etc. complete inall respect SI No. 134C |
| 48 | Wiring point for fan /fresh air fan (light duty exhaust fan)with 1.5 sq.mm.FRLSH PVC insulated multistrand singlecore copper conductor cable in PVC pipe on surface complete with 14 SWG copperearth continuity wire, piano type switch & ceiling rose on3 mm. thick phenolic laminated backelite sheet etc,complete in all respect. SI No. 123C |
| 49 | Supply & wiring of sub main with two Number 2.5 Sqmm. PVC insulated 1100 V multistrand single core copper conductor cable in 20mm dia PVC conduite pipe concealed in wall with1No 1.5 Sq mm PVC FR L.S.H. P.V.C. insulated multistrand copper as earth earth continuity wire. SI No -1304C |
| 50 | Supply and fixing of electronic fan regulator( Modular)120-280 V. ISI marked, on the existing switch boardincluding making connections, required material, labourT&P etc. for proper completion of work to the satisfactionof Engineer in charge of work. SI No. 1203C |
| 51 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.SI.NO 1139 (A) |
| 52 | Supply and fixing of 240V volts' L' series miniature circuit breaker 6Amp. To 32 Amp (10KA) in existing MCB. DB complete with connections as required as per Sl.No. 1002. CAT A |
| 53 | Supply of 48 inch ceiling fan 1200 mm Approved Compney |
| 54 | Supply of 9 Watt Led bulbs Approved Compney Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender