Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 500 metres lead:- thickness of 100 mm or maximum to maintain the proper slope in projections of apartments
2
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade as per site sample available, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily. Proper slope to be mainatined and will be checked after laying of tile. In case slope not proper contractor requires to change the tile with proper slope without any extra cost. Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm or as per site requirement. Color and texture to be match with existing tile color Please Enable Macros to View BoQ information
3
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade as per site sample available, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gentlyand easily. Proper slope to be mainatined and will be checked after laying of tile. In case slope not proper contractor requires to change the tile with proper slope without any extra cost. Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm or as per site requirement. Color and texture to be match with existing tile color Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
