|
| 1 | Annual contract for day to day Maintenance of street lights including providing licensed electrician / wireman and labour for checking,identifying and rectifying, faults in street lights system, replacement of burnt accessories of street light,fixtures, FRP boxes,cables ,wires, pipes etc as directed by Engineer as directed by Engineer -in charge.(Materials such as Lamps, chokes, ignitors ,cables, wires, FRP boxes,pipes etc shall be procured under separate items considered in the estimate). |
| 2 | Cable Enclosures (CB-CE) |
| 3 | Supplying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 4 | LT Cables (Aluminum) (CB-LT/AL) |
| 5 | Supplying FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 6 | Supplying FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Supplying FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 8 | Bunch of Wires (WG-MA/BW) |
| 9 | Supplying mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW |
| 10 | Cable Joints & End Termination Kits (LT Cables) (CB-JT/LT) |
| 11 | Providing straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT |
| 12 | Outdoor Fittings (FG-ODF) |
| 13 | Supplying integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. |
| 14 | Supplying integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. |
| 15 | Accessories for Outdoor Fittings (FG-BKT) |
| 16 | Supplying electronic type Driver for Outdoor LED fittings upto 46W-75W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS. |
| 17 | Supplying electronic type Driver for Outdoor LED fittings upto 76W-100W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS. |
| 18 | Supplying electronic type Driver for Outdoor LED fittings upto 101W-150W suitable to operate on 230V A.C. 50 Hz. having p.f>0.95 and THD<10% as per specification no. FG-ODF/AS. |
| 19 | Miscellaneous |
| 20 | Supplying quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating upto 16A to use independently or in conjunction with contactor. |
| 21 | Supplying four pole power contactor 430V, 40A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 22 | LT - MCBs/ MCB Change Over Switch (SW-MCB) |
| 23 | Supplying SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 24 | Supplying FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 25 | C.C. Foundation |
| 26 | Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole). |
| 27 | Hot Dipped Galvanized Poles & High-Mast (OH-HM) |
| 28 | Providing 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 29 | Providing galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT |
| 30 | Providing galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT |
| 31 | Plate, Pipe type Earthing (EA-EP) |
| 32 | Supplying pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP |
| 33 | Accessories |
| 34 | Supplying GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP. |
| 35 | Sheets (CP-SS) |
| 36 | Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR |
| 37 | Supplying, erecting, testing & commisioning GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint as per specification no. CP/SH/CR |
| 38 | Painting (CW-PTG) |
| 39 | Painting identification number by indelible ink marker/ enamel paint on fittings/ equipment with the help of ladders if necessary by dismantling and refitting the enclosures, tubes etc if required the same and refitting complete. |
| 40 | Supplying of FRP terminal cover for 7m/8m GI octogonal poles Please Enable Macros to View BoQ information |
