Tender For Special Repairs To 20 X Or Md Accn At Abdul Hamid Line Lines Under Ge (North) Ambala Cantt
Tender Value
1.18 Crore
Estimated cost
Bid Submission
14 Jul 2026
9 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To 20 X Or Md Accn At Abdul Hamid Line Lines Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B/R WORKS): Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes complete all as specified and directed. |
| 2 | Dismanteling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering inlcluding dismantling ms flat iron wind ties over roof sheet ( if any ) complete all as specified and directed. |
| 3 | Supply and fixing for pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminious washers complete all as specified and directed. |
| 4 | Supply and fixing for pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminious washers complete all as specified and directed. |
| 5 | Dismantling timber scantlings 40 sq. cm and over in section in any position ( unframed work ) complete all as specified and directed. |
| 6 | Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe -410 W ( Gde -E ) quality A including welding ,distance pieces, gusset plates ,cleats,base plates and neccesary fastenings complete all as specified and diected. |
| 7 | Supply and fixing for Mild steel screw bolts (machine made) of diameter of neck ( 16 mm to 20 mm ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5cm and n exc 30cm long complete all as specified and diected. |
| 8 | Supply and fixing for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts confirming to Fe -410complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) of any description and in any position including any type of sunken treatment , roof treatment, mud phuska, PCC padding,lime concrete etc. and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind. |
| 10 | Material and labour for ,15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth with WPC @ 3% by weight of cement ( WPC will be measuredpaid seperately) as in roof treatment work all as specified and directed. |
| 11 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only , complete, all as specified and as directed.(iv) The work shall be carriout at a height upto 12 metre. |
| 12 | Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement. complete all as specified and directed. |
| 13 | Supply only integral water proofing compound..complete all as specified and directed. |
| 14 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for 500 ltr capacity water tanks complete all as specified and directed. |
| 15 | Material and labour for cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 , complete, all as specified and as directed. |
| 16 | Material and labour for PCC 1:2:4 type B1 (20mm graded aggregate ) as in roof kerb, fillets at junctions between roof and parapet walls, copings rounded or chamfered angles complete all as specified and directed.. |
| 17 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hotmixture of bitumen and clean dry sand 1:1 (by weight) and all as specified and directed. |
| 18 | Dismantling of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. |
| 19 | Material and labour for brick work with sub class 'B' bricks old size, class 7.5 designation, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 20 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius complete all as specified and directed. |
| 21 | Material and labour for sunken floor water proofing treatment complete all as under :–(A) Scrapping the surface with wire brush and cleaning with water and allow to dry.(B) Applying cement slurry @ 3 kg/sqm duly mixed with water proofing compound.(C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(D) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.5 kg/sqm.(E) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(F) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.50 kg/sqm.(G) Curing the sunken portion with water min 48 hours by ponding complete all as specified and directed. |
| 22 | Supply and fixing for 40 mm bore GI pipe medium grade as in spout pipecomplete all as specified and directed. |
| 23 | Material and labour for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 using 40mm graded stone aggregate in sunken treatment complete all as specified and directed. |
| 24 | Material and labour for Preparation of exposed brick wall surface with brushes to remove all dirt / loose materials from the bricks and from the joints between the bricks.Prepared surface should be then washed with diluted HCL acid (Dilution ratio of 1:50) three times ina day for two days.After acid wash surface should be allowed to be air dried for one day.Carrying out efflorescence treatment to exposed and prepared wall surface in the following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent :–(i) Pidicrete URP of M/S Pidilite (ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \\"BY HAND\\" while the primer is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer's instructions :–(i) Pidicrete URP of M/S Pidilite (ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC (c) PMM surface should be allowed to dry for one day. After that it should be painted with two coats of one of the following compounds mixed with cement only in ratio of one part of selected compound and one point five part of cement :–(i) Pidicrete URP of M/S Pidilite (ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC |
| 25 | Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ),removing serviceable tiles to store and rubbish off premisescomplete all as specified and directed. |
| 26 | Material and labour for PCC(1:3:6) type C1 using 20mm graded aggregate as in plinth protection of avg 75mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | Material and labour for 25 mm thick Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in sub base correcrion floors, surface fair finished and even and rough to receive floor finishes complete all as specified and directed. |
| 28 | Material and labour for Non - skid jointfree coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 29 | Material and labour for Non - skid jointfree coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed . |
| 30 | Material and labour for glazed ceramic coloured tiles 450x300x7mm thk on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as directed . |
| 31 | Material and labour for non–skid ceramic coloured outdoors paver tiles10mm thick (square /rectangular) area of each tiles exe 0.06 sqm but n exe 0.11 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed . |
| 32 | Demolition of stone slabs of any description or any thickness laid bedded and pointed in any mortar in floors and walls approns etc. complete all as specified and directed. |
| 33 | Rounding to Edges of stone slabs one edge such as in steps and plateform etc. complete all as specified and directed. |
| 34 | Material and labour for Machine cut green marble stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 36 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 37 | Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs, suported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 38 | Material and labour for formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick horizontal or sloping , rough finished flat surfaces complete all as specified and directed |
| 39 | Material and labour for form work for concrete flats teads exc 5 cm but n exc 10cm wide rough finished complete all as specified and directed. |
| 40 | Supply and fixing for mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips. complete all as specified and directed. |
| 41 | Taking down frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame complete all as specified and directed. |
| 42 | Taking down frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame. complete all as specified and directed. |
| 43 | Supply and fixing for of coloured factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length, complete all as specified and directed by Engr-in-charge.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work. complete all as specified and directed. |
| 44 | Supply and fixing for of coloured factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast ( 35mmx35mmx3 MM ) of required length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work |
| 45 | Supply and fixing for coloured Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast of required size and length complete all as specified and directed. |
| 46 | Supply and fixing for Factory made coloured solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 47 | Supply and fixing for of coloured factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification & drawing complete all as specified and directed |
| 48 | Supply and fixing for of coloured factory made single extruded WPC (Wood Polymer Composite) gauzed decorative type plain ( Jointless ) door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification & drawing complete all as specified and directed.Note : wire mesh shall be paid seperately |
| 49 | Material and labour for Providing and Fixing of windows made of coloured pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for shutter frame should be of 52x25mm and size of flymesh shutter should be of 20x40mm and rebate for Glazed shutter and flymesh shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float/frosted glass with rubber gaskets including fixing the frames in concrete/masonry wall by MS holdfast, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work. (Make: Elixir Met Form Pvt Ltd. / A2Z Infra Solutions / Urban Space )Note : Supply and fixing for of Glass panes and stainless steel wire mesh in glazed/gauged shutters of windows are inclusive in above rate , nothing extra shall be admissible in to this account . |
| 50 | Supply and fixing for box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer ,complete all as specified and as directed. |
| 51 | Supply and fixing for mild steel door shutter two leaves with frame of 20 gauges MS sheet ( all all round) and leaves of 21 gauge MS steel ( all as per Godrej pattern) with three way locking arrangement with brass lock & CP handles with duplicate keys including two coats of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1:2:4, complete, all as specified and as directed . Note : Area of opening shall be measured. |
| 52 | Supply and fixing for of ordinary glass 3mm thick with oil putty in square n exc 0.50 sq in each pane complete all as specified and directed. |
| 53 | Supply and fixing for bands hold fast etc including welding confirm to fe 290 Gde E 165 complete all as specified and directed. |
| 54 | Supply and fixing for Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | Supply and fixing for 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pine including screwing or welding to MS / PVC frame ( as required ) all as specified and directed |
| 56 | Supply and fixing for in Alumminium handles 150 mm,cast type , anodised complete all as specified and directed. |
| 57 | Supply and fixing for 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed. |
| 58 | Supply and fixing for mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 59 | Supply and fixing for 150mm long aluminium anodized barrel tower bolt of extruded section. Complete all as specified and directed. |
| 60 | Supply and fixing for 200mm long aluminium anodized barrel tower bolt of extruded section. Complete all as specified and directed. |
| 61 | Supply and fixing for 250MM long aluminium anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of excruded section and fixing bolt and sliding Complete all as specified and directed. |
| 62 | Supply and fixing for GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes Complete all as specified and directed. |
| 63 | Supply and fixing for GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes Complete all as specified and directed. |
| 64 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth Complete all as specified and directed. |
| 65 | Supply and fixing for as in repair looking mirror of size 600x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed. |
| 66 | Supply and fixing for in repair Vitreous china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap PVC low level flushing cistern 10 ltrs capacity and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia Complete all as specified and directed.Note : The cost of traps , flushing cistern and PVC flush pipes are included in this item. |
| 67 | Supply and fixing for in repair vitreous china wash hand basin star white size 550mm x 400 mm including CI brackets, PTMT waste coupling,waste pipe 32 mm bore Complete all as specified and directed. |
| 68 | Supply and fixing for as in repair sinks made of stainless steel with drain board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including providing and fixing cantilever CI brackets , waste pipe , waste coupling and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmComplete all as specified and directed.Note : (i) The cost of waste coupling , PVC waste pipes are inclusive with this item and nothing extra will be admissible in to this account . |
| 69 | Supply and fixing for as in repair fancy type pillar taps of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed Complete all as specified and directed. |
| 70 | Supply and fixing for in repair 15 mm stop valves/Angle valse ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed. |
| 71 | Supply and fixing for in repair 15 mm dia Bib taps, long shank , cast copper alloy with crutch or butterfly handle, screwed down, crewed with flange cap for iron pipe or for brass ferrule and fixed Complete all as specified and directed. |
| 72 | Material and labour for in repair Chromium plated shower rose 125 mm dia with shower arms with or without swivel joints including fixing to steel pipe or union Complete all as specified and directed. |
| 73 | Supply and fixing for in repair 15 mm concealed stop valves ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed. |
| 74 | Supply and fixing for 15 mm dia 45 cm long PVC water connection with brass nuts ( Hot and cold ) and washers Complete all as specified and directed. |
| 75 | Supply and fixing for as in repair CP ( brass body ) Towel Rail 450mm long fixed with and including Chromium plates brass screws and wooden /plastic cleats (minimum weight 170gms ) Complete all as specified and directed. |
| 76 | Material and labour for Stainless steel plate rack of size 31\\" x 30\\" x 10\\" of minimum thickness not less than 1 mm thick and load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description complete all as specified and directed. |
| 77 | Supply and fixing for in repair Stainless steel ( SS 202 grade ) Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including ornamental type supporitng and end brackets as per sample complete all specified and directed. |
| 78 | Material and labour for PVC (SWR) floor trap plain with CP grating including jointing with solvent cement outlet dia 100 mm in repair. Note : Cost of grating are included in this item Complete all specified and directed. |
| 79 | Supply and fixing for In Repair Soap Dish Complete all specified and directed. |
| 80 | Dismantling water tanks capacity exc. 250 ltrs but n exc 500ltr and removing to store Complete all specified and directed. |
| 81 | Supply and fixing for 20mm PTMT nipple suitable for HDPE water tank (minimum weight 15 mm-38gms/20mm-45gms/25mm-65gms)Complete all specified and directed. |
| 82 | Supply and fixing for ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm dia of make prayag or equivalent Complete all specified and directed. |
| 83 | Supply and fixing for Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top)with three layers white colour including hoisted and fixed in position all as specified in SSR Part I.Note : - The colour of tanks shall be white colour . |
| 84 | Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 75/110/100 mm bore PVC pipe, complete all as specified and directed. |
| 85 | Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc, as in foul condition for any depth complete all as specified. Note:- Sludge, scum, silt (both organic and inorganic nature) water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land Complete all specified and directed. |
| 86 | Excavation in trenches not exc 1.50 mtr wide and n exc 1.50 mm in depth and getting out in soft/ loose soil for shafts, wells, cesspits, manholes, pier holes and NP2 pipes etc,. complete all as specified and directed. |
| 87 | Returning filling in including spreading, levelling, watering and wall ramming in layer n exc not exc 25 cm, any kind of soil complete all as specified and directed. |
| 88 | Removing execavated material n nexc 50m and depositing where directed at a level n exc 1.5m starting point complete all as specified and directed. |
| 89 | Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar 100 mm and below complete all as specified and directed. |
| 90 | Supply and fixing for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches , bore of the pipe 110 mm complete all as speciifed . |
| 91 | Material and labour for concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid or tected in cement concrete (1:3:6) type C-2 ( using 40mm graded stone aggregate) complete all as specified and directed |
| 92 | Material and labour for concrete bed to 100 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid or tected in cement concrete (1:3:6) type C-2 ( using 40mm graded stone aggregate) complete all as specified |
| 93 | Material and labour for 150 mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed Complete all specified and directed. |
| 94 | Material and labour for PCC 1:2:4 type B1 using 20mm traded stone aggregate as in Coping /benching including necessary form work and finishing all exposed surfaces of concrete Complete all specified and directed.. |
| 95 | Supply and fixing for precast RCC 1:2:4 type B1 as in cover slab set in CM 1:6. |
| 96 | Material and labour for PCC type C2 1:3:6 using 40 mm graded aggregate as in surface channels and drains complete all as specified. |
| 97 | Extra for forming fair finished channel and drain 30 cm inner girth in cement concrte using extra cement Complete all specified and directed. |
| 98 | Supply and fixing for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor/trenches bore of the pipe 75 mm Complete all specified and directed. |
| 99 | Supply and fixing for PVC(SWR) bends 110 mm dia. with access door Complete all specified and directed. |
| 100 | Supply and fixing for PVC(SWR) bends 75 mm dia. with access door Complete all specified and directed. |
| 101 | Supply and fixing for PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door Complete all specified and directed. |
| 102 | Supply and fixing for PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified |
| 103 | Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including taking down old gully traps of any description complete all as specified . |
| 104 | Supply and fixing for PVC (SWR) vent cowl of 75 mm bore Complete all specified and directed. |
| 105 | Supply and fixing for PVC (SWR) reducer of 75 x110 mm bore Complete all specified and directed. |
| 106 | Taking down cement plaster on brick or stone surfacs including raking out joints hacking for key scrubbing down with water etc. Complete all specified and directed. Please Enable Macros to View BoQ information |
| 107 | Taking down cement plaster on brick or stone surfacs including raking out joints hacking for key scrubbing down with water etc. Complete all specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender