|
| 1 | Supplying and Installation of Moisture Resistant,Fire Resistant Cement board as per standard sizes, fixed with self drilling Taping Screws, Screws shall be counter sunk rib head, of 1.60 mm to 4 mm thick of 8 to 10 guage of varying length from 25 mm to 45 mm cement bonded particle board 8 mm thick (Termite Fire and Moisture Resistant) as per IS 14276:1995 . The joints between the boards are to be duly jointed and finished using recommended jointing cement based compund and fibre joint tape roll 50 mm wide, and two coats of suitable primer |
| 2 | Providing and Fixing Frame work for partitions wall linings etc, made up of 50X50X1.6 mm MS hollow tubeplaced along the wall , ceiling and floor in grid pattern,with spacing 60 cm centre to centre both ways,or at requiref spaced near opening, with necessary welding at junctions,and fixing the frame to wall ceiling and floor, with steel dash fastners 8mm dia,75mm long bolt, including making provision for opening of doors,windows,electrical conduits,switch board etc,including providing with two coats of approved steel primer, etc complete as per the directions of Engineer-In-Charge |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion |
| 4 | For Openable Portion shutters of doors windows and ventilatorsFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 5 | Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With Float Glass Pane of 5mm weight not less than 12.50 kg/sqm |
| 7 | Distempering with First quality acrylic distemper of approved brand having VOC content less than 50gm per lire of approved brand of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 grams per litre |
| 8 | Dismantling Aluminium/Gypsum Partitions doors windows, fixed glazing, and false ceiling including disposable of unservicable material and stacking of servicable material,within 50 meters lead, as directed by Engineer-In-Charge |
| 9 | Dismantling tile work (Cutting and chasing with blade) in floor and roofs laid in cement mortar including stacking material with in 500 meters lead for thickness of tiles 10mm to 25 mm |
| 10 | Demolishing cement concrete manually or mechanical means and disposal of the and disposal of the material with in 500 m lead as per the direction of Engineer In charge Nominal or design mix 1:3:6 or richer |
| 11 | Providing and laying vitrified tiles of different sizes (thickness to be specified by manufacturer) with water absorption less than 0.8% and confirming to IS 15622 of approved brand and manufacture in all colours and shade, in skirting, risers of step, laid with cement based high polymer modified quick setting, tile adhesive, (water based) confiring to IS 15477in averqage 6 mm thickness including grouting of joints with white cement and matching pigment. |
| 12 | Providing and laying vitrified tiles of different sizes (thickness to be specified by manufacturer) with water absorption less than 0.8% and confirming to IS 15622 of approved brand and manufacture in all colours and shade, in floor with cement based high polymer modified quick setting, tile adhesive, (water based) confiring to IS 15477in averqage 6 mm thickness including grouting of joints with white cement and matching pigment. |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 14 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers (best make of approved quality) without pair of handles for aluminium doors but includes necessary cutting and making good the aluminium sections complete. |
| 15 | Providing and Fixing IS 12814 marked stainless steel butt hinges with SS screws complete 125X64X1.90 |
| 16 | Providing and Fixing Stainless Steel handles ISI marked with necessary screws complete 125mm X8 mm D type |
| 17 | providing and fixing Stainless steel ISI marked latches 250mmX10 mm |
| 18 | Providing and Finishing Stainless Steel ISI marked hanging door stopper with all necessary screws complete Please Enable Macros to View BoQ information |
