|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engineer-In-Charge. |
| 3 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 4 | Demolition of cement Concrete (reinforced) other than ground floors and pavings complete all as directed. |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in cement mortar etc. complete all as directed by Engineer-In-Charge. |
| 6 | Demolition of Brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as directed by Engineer-in-Charge. |
| 7 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia |
| 8 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia |
| 9 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 32 mm dia |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge. |
| 11 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. |
| 12 | Material and labour for precast cement concrete block 1:3:6 type C1 using 20 mm graded crushed stone aggregates masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4, complete all as specified. |
| 13 | Material and labour for 25 mm thick PCC 1:2:4, type B0 with using 12.50 mm graded stone aggregate as in flooring finished fair and even complete all as specified and directed by Engr-in-charge. |
| 14 | Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. |
| 15 | Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4, including edge moulding of counters vanities etc. and machine polishing to edge to give high gloss finish etc.complete all as specified. |
| 16 | Material and labour for 8 to 10 mm thick joint free premium quality glazed ceramic colour tiles of size 600 mm x 300 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. |
| 17 | Material and labour for 15 mm thick rendering in cement mortar 1:4 in two layers (10 mm +5 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (5 mm) as per manufacturer instruction complete all as specified . Note: LWPC shall be measured and paid including this item |
| 18 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces. |
| 19 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. |
| 20 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. |
| 21 | Supply, lay and fix 32 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. |
| 22 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girth complete all as specified. |
| 23 | Supply and fix as in repairs,15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030 |
| 24 | Supply and fix as in repairs 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction.Make:- Jaquar Cat No FON-40053/ Johnson Cat No T3410C/ Cera Cat No F2008201 |
| 25 | Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified. |
| 26 | Supply and fix as in reairs 75mm dia PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and directed. |
| 27 | Supply and fix as in repairs, brass CP sink mixer for mixing hot and cold water including 15 mm bore hot water pipe duly insulated with glass wool and aluminium cladding complete all as specified. |
| 28 | Supply and fix Vitreous China wash basin, full pedestal semi circle shaped including 32 mm dia waste fittings and waste pipe including brackets complete all as per manufacturer instruction including taking out old basin with all fixtures. |
| 29 | Supply and fix as in repairs vitreous china wash down water closet pan (pedestal pattern) with seat and cover closed pattern flat bottom, and mild steel chromium plated or aluminised hinging device white colour with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as per manufacturer instruction |
| 30 | Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW |
| 31 | Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as specified.Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW |
| 32 | Material and labour for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces compleye all as specified. |
| 33 | Material and labour for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified. |
| 34 | Material and labour for providing 10 mm thick (average) rendering in cement mortar 1:3 mixed with IWPC as per manufacture's instruction for levelling to a true surface and finished the surface even and smooth without using extra cement complete all as directed by Engineer-In-Charge.Note: IWPC will be measured and paid including this item |
| 35 | Material and labour for PCC 1:5:10, type E2 using 40 mm graded crushed stone aggregates as in filling of sunken floor and finished the surface even and fair complete all as specified. |
| 36 | Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.Make: Any of as per Engineer-In-Chief branchs list of approved makes |
| 37 | Material and labour for providing precast cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces complete all as specified. |
| 38 | Disconnecting existing tanks of Capacity exceeding 250 ltr but not exceeding 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge. |
| 39 | Material and labour for cleaning and removing all scale and dirt, etc, from PVC tanks exceeding 250 ltr but not exceeding 500 ltr and from mouths of circulating pipes, etc. complete all as directed by Engineer-In-Charge. |
| 40 | Disconnecting existing tanks of Capacity exceeding 500 ltr but not exceeding 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge. |
| 41 | Material and labour for cleaning and removing all scale and dirt, etc, from PVC tanks exceeding 500 ltr but not exceeding 1000 ltr and from mouths of circulating pipes, etc. complete all as directed by Engineer-In-Charge. |
| 42 | Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer-In-Charge. |
| 43 | Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 5000 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer-In-Charge. |
| 44 | Supply and fix as in repairs float ball valves 20 mm dia high pressure PTMT with epoxy coated aluminium rod (Minimum weight of valve 210 gms) and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-In-Charge. |
| 45 | Supply and fix as in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed for 20 mm bore all as specified. Please Enable Macros to View BoQ information |
| 46 | Supply and fix as in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed for 20 mm bore all as specified. Please Enable Macros to View BoQ information |
