Tender For Maintenance Of Misc B/R Services In Sector C & D In Akhnoor Mil Stn Under Ge (S) Akhnoor.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Akhnoor → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Misc B/R Services In Sector C & D In Akhnoor Mil Stn Under Ge (S) Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed. |
| 2 | Dismantling AC corrugated, semi corrugated sheets in roof covering, complete all as specified and directed. |
| 3 | M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 4 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 5 | Dismantling framed timber scantlings 40 sq.cm and over in section, in any position, complete all as spd and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed, complete all as specified and directed. |
| 7 | S&F for mild steel structural steel work as in roof trusses any description of steel member purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165), complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) any type and in any position not otherwise specifically provided from, complete all as specified and directed. |
| 9 | M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains, complete all as per specified and as directed. |
| 10 | M&L for extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed. |
| 11 | Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed. |
| 12 | M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 13 | Description all as per Serial item No. 12 here in above but except brick complete all as specified and directed. |
| 14 | M&L for stone walling of random rubble, brought upto course, well bonded, bedded and solidly hearted built in cement mortar 1:4, complete all as specified and directed. |
| 15 | M&L for stone walling of random rubble except stone, brought upto course, well bonded, bedded and solidly hearted built in cement mortar 1:4, complete all as specified and directed. |
| 16 | M&L for extra over stone walling for hammer dressing 40mm to face of sand stones and dressing of faces beds and joints, as specified for random rubble walling uncoursed or brought upto course, complete all as specified and directed. |
| 17 | M&L for raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar 1:4, complete all as specified and directed. |
| 18 | Taking down cement plaster from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall, finished even & smooth without using extra cement, complete all specified and directed. |
| 20 | M&L for applying wall putty 2mm thick over & above, complete treated or untreated surface complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered or unplastered surface of wall and applying two coat of cement base paint, complete all as specified and directed. |
| 22 | M&L for preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint Asian Apex Ultima/ Berger weathercoat long life / Nerolac Excel as approved over a coat of primer, complete all as specified and directed. |
| 23 | M&L for preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc), complete all as specified and directed. |
| 24 | M&L for applying wall putty 1mm thick over & above complete treated or untreated surface, complete all as specified and directed. |
| 25 | M&L for preparation of old existing surface of wall and applying two coat of cement base paint, complete all as specified and directed. |
| 26 | M&L for applying one coat of exterior emulsion paint Asian Apex Ultima/ Berger weathercoat long life / Nerolac Excel as approved complete all as specified and directed. |
| 27 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed. |
| 28 | M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement, complete all as specified and directed. |
| 29 | M&L for 25mm thick plain cement concrete 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sub floor surfaces, complete all as specified and directed. |
| 30 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc. of tiles as directed at site, including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and directed. |
| 31 | M&L for 75mm thick plain cement concrete 1:3:6 type C-2, using (40mm graded crushed stone aggregate) as in sub base of floors over and including ramming of old surface and side filling, complete all as specified and directed. |
| 32 | Providing and laying factory made cement concrete tiles of M-35 grade with approved colour, design & pattern , 22 to 25mm thickness & 300x300mm size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and filling the joints using white cement and pigments and cutting of tiles as required size and pattern finishing and sweeping, including screed bed or bedding layer of cement mortar 20mm thick for laying floor finishes in cement mortar 1:4, complete all as specified and directed. |
| 33 | M&L for 100mm thick cement concrete type D-2 1:4:8, 40mm graded crushed stone aggregates as in sub base etc. finished surface even and rough without using extra cement, complete all as specified and directed. |
| 34 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweepin, including 50mm sand cushioning and filling of joints by sand under floors including watering and consolidation, complete all as specified and directed. |
| 35 | Providing and laying at or near ground level precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening and excavation for embedding inside, complete all as specified and directed. |
| 36 | M&L for plain cement concrete M-15 1:2:4, type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and as directed . |
| 37 | Dismantling of floor, hearth or wall tiling, stone tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 38 | M&L for 18mm thick granite (Lakha red or black as approved) table rubbed and polished in steps, jambs pillars, window cill, cooking platform (in single piece) and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 39 | Providing edge moulding 18mm thick granite stone to counters vanitties etc. including machine polishing to edge to give high gloss finsh etc., complete all as spd and directed. |
| 40 | M&L for glazed ceramic coloured designer pattern tiles 450mmx300mmx7mm thick on vertical surface such as skirt, dado etc. set and jointed in white colour cement, including rendering 10mm thick in cement mortar 1:3 on fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 41 | M&L for glazed ceramic (stone or wooden textured) coloured tiles n exc 0.36 Sqm 7 to 8mm thick on vertical surfaces such as skirting, dados and rises to steps, walls, columns etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade, including rendering 10mm thick in cement mortar 1:3 on fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 42 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. Please Enable Macros to View BoQ information |
| 43 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 days