Tender For Repair To Roof Sheet And Allied Work At Katapahar Area Under Age (I) Darjeeling
Tender Value
9.10 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
1 days left
EMD
18200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KATAPAHAR → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof Sheet And Allied Work At Katapahar Area Under Age (I) Darjeeling
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel and FRP sheeting of any gauge & thickness from roof, gutter etc incl Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. |
| 4 | M&L for 0.8mm thick plain, galvanised, mild steel sheeting in ridges, hips, vally gutters, drip and straight flashing, complete all as specified and as directed by Engineer-in-charge. |
| 5 | S&F 2mm thick fiber glass reinforeced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, complete all as specified and as directed by Engineer-in-charge. |
| 6 | S&F mild steel flat iron as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts etc and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed by Engineer-in-charge. |
| 7 | Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonry, etc., including taking out embedded portion and making good distributed ground, complete all as specified and as directed by Engineer-in-charge. |
| 8 | Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge. |
| 9 | M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as per specified and as directed by Engineer-in-charge. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge. |
| 12 | Dismantling timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge. |
| 13 | Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm as in framed work, complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L for 2nd class HW as in scantlings timber fixed work clean sawn, complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and as directed by Engineer-in-charge. |
| 16 | M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge. |
| 17 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed by Engineer-in-charge. |
| 18 | S&F PVC (SWR) half round gutter drain pipe 180mm bore including pipe clamp, complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F 180mm PVC (SWR) joint socket as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F 180mm PVC (SWR) pipe clamp as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge. |
| 22 | S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joint, complete all as specified and as directed by Engineer-in-charge. |
| 23 | S&F PVC (SWR) bends 110mm bore (any radius), complete all as specified and as directed by Engineer-in-charge.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender