|
| 1 | Item Rate BoQ 82558/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: PETTY REPAIR AND CERTAIN OTHER MISC B/R WORKS AT MUNDOTA AND BHANKROTA MIL STN UNDER GE (S) JAIPUR CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | S&F in repair CP cast copper alloy bib taps with wall flange fancy type of 15mm bore quarter turn, complete all as specified & directed. |
| 3 | S&F in repair fancy type pillar cock 15mm bore cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified & directed. |
| 4 | S & F as in repair stop valves cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore complete all as specified & directed. |
| 5 | S & F as in repair angle stop valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore complete all as specified & directed. |
| 6 | M&L in repair spindles for 15mm CP brass bib cock/ stop cocks etc size 1 nos to 4 nos for full turns/ half turns complete all as specified & directed. |
| 7 | S & F as in repair stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore complete all as specified & directed. |
| 8 | S & F as in repair stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 20 mm bore complete all as specified & directed. |
| 9 | S&F in repair CP cast copper alloy 2 way bib tap with wall flange and areator fancy type of 15mm bore quarter turn complete all as specified & directed. |
| 10 | S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified & directed. |
| 11 | S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified & directed. |
| 12 | S&F in repair of chromium plated overhead shower with revolving joint and 125mm long shower arm with wall falnge 15mm bore fancy type any colour complete all as specified & directed. |
| 13 | S&F in repair 32mm dia PVC waste pipe flexible type for WHB 60cm long with union complete all as specified & directed. |
| 14 | S&F in repair waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified & directed. |
| 15 | S&F in repair 40mm dia PVC waste pipe for kitchen sink 60cm long with union complete all as specified & directed. |
| 16 | All as per item No 14 above but 40mm dia for stainless steel sink |
| 17 | Dismantling and taking up or down the existing unserviceable GI pipe 15mm bore and S&F new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors of following complete all as specified & directed. :- |
| 18 | All as per item No 16.00 above but 20mm bore |
| 19 | All as per item No 16.00 above but 40mm bore |
| 20 | Taking up or down the existing serviceable GI steel tubing 15mm bore and connection ,including cleaning and refixing old steel tubing and connection new or old position ( walls,ceiling,floor,trenches etc) complete all as specified & directed. |
| 21 | All as per item No 19.00 above but 20mm bore |
| 22 | S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple upto 200mm, tee, union, reducer socket, reducer tee, tee, union etc for 15/20mm bore at any height or any floor including taking down plaster/tiles of walls and making good surface of broken wall/floor complete all as specified & directed. |
| 23 | S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple upto 200mm, tee, union, reducer socket, reducer tee, tee, union etc for 40mm bore at any height or any floor including taking down plaster/tiles of walls and making good surface of broken wall/floor complete all as specified & directed. |
| 24 | S&F in repair PVC syphone set with handle complete for low level flushing cistern complete all as specified & directed. |
| 25 | S & F in repair PVC valveless, syphonic action type flushing cistern 10 lirs capacity, low level, white with inlet, ball valve, float and handle incl brackets & flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern complete all as specified & directed. |
| 26 | S&F in repair plastic water closet seat cover white/ colour, closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified & directed. |
| 27 | S&F in repair vitreous china wash hand basin flat back basin including half pedastal, coloured, size of 550 x 400mm including CP waste coupling but excluding taps, waste chan & plug complete all as specified & directed. |
| 28 | Demolition of old existing unserviceable WHB glazed incl demolition of granite(if Required) and S&F counter sunk type vitreous china wash hand basin white of any size complete including all connected accessories and cutting for and pinning in granite/wall for fixing WHB with all finishes complete all as specified & directed..(Note : New granite fixing measured separately) |
| 29 | S & F in repair Vitreous China urinals,half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe and PTMT urinal spreader (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified & directed. |
| 30 | Dismantling 500 ltr water tank and M&L new 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in ssr part-I complete all as specified & directed. |
| 31 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position capicity exc 250 ltr &nexc 500 litre including M & L for Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 and not exc 500 ltrs and from mouths of circulating pipes, etc complete all as specified & directed.Note - if any item(i.e. float valve, tank connection etc) is broken during cleaning of tank then contractor is liable to replace item on his own cost.) |
| 32 | S&F in repairs PVC sintex water storage tank lid cover ( cylindrical) for 500/300 ltrs capacity tanks complete all as specified & directed. |
| 33 | S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm- 210 gms) complete all as specified & directed. |
| 34 | Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified & directed. |
| 35 | S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete incl connection to trap & flushing pipe antisyphonage pipe etc complete all as specified & directed. |
| 36 | S&F in repair toilet paper holder for CP fixed to walls with chromium plated (CP) brass screws complete all as specified & directed. |
| 37 | S&F in repair CP health faucet with chain of 15mm bore complete all as specified & directed. |
| 38 | Dismantling of PVC/ AC and cast iron drain pipes of 150/160mm dia, jointed in cement mortar and taking out of trenches or in wall if required complete all as specified & directed. |
| 39 | S & F PVC (SWR), in any length with or without ears with cement joints, laid in trenches or in floors / fixed to wall (including clamps),150mm bore complete all as specified & directed. |
| 40 | S & F PVC (SWR),bends,150mm bore sand cast pipe complete all as specified & directed. |
| 41 | Dismantling of PVC/ AC and cast iron drain pipes of 100/110mm dia, jointed in cement mortar and taking out of floor, trenches or in wall if required complete all as specified & directed. |
| 42 | S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe complete all as specified & directed. |
| 43 | S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall,100mm bore sand cast pipe complete all as specified & directed. |
| 44 | Dismantling of PVC/ AC and cast iron drain pipes 75mm dia, jointed in cement mortar and taking out of floor,trenches or wall if required complete all as specified & directed. |
| 45 | S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, 75mm bore sand cast pipe complete all as specified & directed. |
| 46 | S & F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall, 75mm bore sand cast pipe complete all as specified & directed. |
| 47 | S & F in repair Cast Iron soil cowl 100 mm dia complete all as specified & directed. |
| 48 | S & F in repair Cast Iron bends/tee (any radius) 100 mm dia with oval access doors complete all as specified & directed. |
| 49 | S & F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & directed. |
| 50 | S & F in repair Cast Iron bends/tee (any radius) 75 mm dia with oval access doors complete all as specified & directed. |
| 51 | S & F in repair 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & directed. |
| 52 | S&F in repair CP grating with/without hole 100mm dia round fix on floor/ nahani trap fixed with cement mortar ccomplete all as specified & directed. |
| 53 | Dismantling of old unserviceable trap and S&F of CI Nahani / floor trap and square/round in size of 75mm fixed in cement concrete type B-1 (1:2:4) including MS chromium plated grating 100mm dia complete all as specified & directed. . |
| 54 | S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100/110 mm bore pipe complete all as specified & directed. |
| 55 | S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified & directed. |
| 56 | S&F in repair of 20mm tubular CP towel rail complete all as specified & directed. |
| 57 | S & F in repair drapery rod powder coated 20- 25 mm dia incl fixing brackets and decorative knobs as required on each end of rod of approved pattern and colour complete including taking down old curtain rod with brackets complete all as specified & directed. |
| 58 | S&F in repair aluminium powder coated peg stay of any size for aluminium window complete all as specified & directed. |
| 59 | S&F in repair PVC/aluminium window handles of any size and any type for aluminium windows complete all as specified & directed. |
| 60 | Taking down chowkats or frames with shutters not exc 1.50 sqm each (without taking off shutters from the frames) complete all as specified & directed. |
| 61 | Taking down chowkats or frames with shutters exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified & directed. |
| 62 | Taking down shutters of any description not exc 1 sq.m complete all as specified & directed. |
| 63 | Taking down shutters of any description exc 1 sq.m and n not exc 2.00 each complete all as specified & directed. |
| 64 | Taking down shutters of any description not exc 1 sq.m each and refixing in the same opening after easing and adjusting including minor repair as required complete all as specified & directed. |
| 65 | Taking down shutters of any description exc 1 sq.m and n not exc 2.00 each and refixing in the same opening after easing and adjusting including minor repair as required complete all as specified & directed. |
| 66 | S&F 105x60mm Pressed steel frames made out from 1.25mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc, including back filling of chowkhat with PCC 1:3:6 type c-1 (20 mm graded agg) ccomplete all as specified & directed. |
| 67 | S&F 125x60mm Pressed steel frames made out from 1.25mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate hold fast etc, including back filling of chowkhat with PCC 1:3:6 type c-1 (20 mm graded agg) etc, complete all as specified & directed. |
| 68 | S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered with decorative mica face panels free from twist or wrap in plane, complete all as specified & directed. |
| 69 | S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde sy resin adhesive confirming to IS-710. The size of rails & style shall be as per IS-1003 complete all as specified & directed. |
| 70 | S & F 30mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire mesh etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. |
| 71 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain/ colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 72 | S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or raised panel design with2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing including PVC sheet fixed on flush shutter in lipping in case of PVC sheet is heat bent as lipping on the edges of doors complete all as specified & directed. |
| 73 | S & F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement all as per specification & drawing. |
| 74 | S&F aluminium anodised powder coated frame of approved colour coating for doors, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified & directed. |
| 75 | S&F aluminium anodised powder coated door/ window & ventilators shutter openable type fixed with al sec weighing 0.55 Kg/ mtr incl necessary joining cleats, glazing clips, rubber packing snap beading, screws , handle & tower bolts, roller, incl section of handle, inter locking arrangements, top & bottom of shutter complete all as specified & directed. |
| 76 | S&F 4.8mm thick glass of colour/ tinted pattern of any shapeand size as required complete all as specified & directed. |
| 77 | S&F 4.8mm thick figured glass, pin headed type and glazing with rubber packing, beading in square n exc 0.5 Sqm in each pane complete all as specified & directed. |
| 78 | S&F Mild Steel 4 lever Mortice lock, vertical type, size 100mm complete all as specified & directed. |
| 79 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed with stainless steel screws, type B-21 of size 100mm complete all as specified & directed. |
| 80 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified & directed. |
| 81 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified & directed. |
| 82 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified & directed. |
| 83 | S&F galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified & directed. |
| 84 | S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165) complete all as specified & directed. |
| 85 | M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish or any other high glossy varnish as approved by engr in charge and staining in oil etccomplete all as specified & directed. (Note: the finishing of varnish on wooden surface will be passed by Engr in charge) . |
| 86 | M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified & directed. |
| 87 | M & L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparatin of surfaces complete all as specified & directed. |
| 88 | S&F in repair door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified & directed. |
| 89 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed. |
| 90 | S & F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed. |
| 91 | S & F in repair 200/250 mm long aluminium sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified & directed.. |
| 92 | S & F in repair aluminium anodised handles cast moulded type 150mm size fixed with screws complete all as specified & directed. |
| 93 | S & F in repair aluminium barrel tower bolts of extruded section, 200mm long complete all as specified & directed. |
| 94 | Repairing of existing aluminium door/window ventilator of net opening area exc 1.00 Sqm but n exc 4.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified & directed. (Floor door springs, Neosprene rubber beading ,glass, Hinges, Door Closer where repaired shall be measured and paid under seperate Item |
| 95 | Ditto all as above ser no 97.00 but door/window/ventilator shutter but area n exc 1.00 sqm. |
| 96 | S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples in aluminium windows, panelled doors or any other article etc. complete all as specified & directed. |
| 97 | Hacking out old broken glass any thickness size, quality or description from wooden/ steel frames fixed with beads/ metal pinning , S&F 4 to 5mm thick sheet glass in square or rectangular not exc 0.50 Sqm in each pane fixed with wooden beads or putty or by neoprene rubber gasket etc. complete all as specified & directed. |
| 98 | All as per item No 100 above but pin headed froasted glass 4-5mm thick complete all as specified & directed. |
| 99 | S & F in repair neoprene rubber gaskets and aluminium beading of any size for fixing glass in aluminium windows/doors complete all as specified & directed. |
| 100 | S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified & directed. |
| 101 | S & F in repair 75mm size hasp and staple, safety type, aluminium anodised and fixed with screws complete all as specified & directed. |
| 102 | S & F in repair wooden/PVC knob for cupboards of any size and fixed with screws complete all as specified & directed. |
| 103 | S&F in repair continuous ( piano ) hinges , width of flaps (when open ) 40mm mild steel bright finish or electro galvanised complete all as specified |
| 104 | Taking down and refixing steel cuboard shutter with resecuring or easying & adjusting in same opening n exc 2 sqm each including making good of surface and two coat of synthetic enamel paint complete all as specified & directed. |
| 105 | Supply only Mild Steel bright finish or electrogalvanised handle with lock including all fixture for inbuilt almirah complete all as specified & directed. |
| 106 | M & L for repairing/greasing of Steel rolling shutters any sizes, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated,complete but gear operated type with bevel gear box and crank handle complete all as specified & directed. (Note: any type of parts / material required in repairing is included in quoted rate. No separate item will be paid for repairing) |
| 107 | M & L for repairing/greasing of Steel rolling shutters gear box, with ball bearing and handles complete all as specified & directed.(Note: any type of parts / material required in repairing is included in quoted rate. No separate item will be paid for repairing) |
| 108 | S & F in repair aluminium floor door stopper 140 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified & directed. |
| 109 | S&F in repair bevelled edge mirror of selected good quality glass of area not less than 0.26 sqm, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. Make:Atul/Modi Guard/Swastic/Saint Gobain |
| 110 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 111 | Glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified & directed. |
| 112 | M & L coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & incl 15mm thick screed bed in CM 1:6 complete all as specified & directed. |
| 113 | M & L for Vitrified ceramic tiles Dark Shade 10mm thick (square/rectangular) polished, area of each tiles not exc. 0.42 sqm but not exc. 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 114 | All as per item No 116 above but as in skirting/ vertical surface over & incl 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified & directed. |
| 115 | S&F light shade vetrified ceramic tiles edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified & directed. |
| 116 | All as per item No 118 above but as in skirting/ vertical surface over & incl 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified & directed. |
| 117 | Dismantling of stone slabs/granite/kota stones on roofs, suspended floors, floors, chajjas, landing etc in any position and any thickness jointed in any mortar complete all as specified & directed. |
| 118 | M&L granite 16 to 20mm thick(avg 18 mm) ( of any type) work ( table rubbed and polished in steps, jambs, pillars, windows cills, cooking platforms and including 20mm thick screed bed ( bedding layer) like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 119 | M&L machine cut green/white/coloured marble slab 16 to 18mm thick in floor, risers & treads of steps, jambs, pillars, window cills, cooking platform, skirting and similar work over & including 20mm thick screed bed ( bedding layer) in CM 1:6, pointing in white cement incluidng cutting and polishing all as specified |
| 120 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ccomplete all as specified & directed. |
| 121 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with CM1:6 complete all as specified & directed. |
| 122 | M & L for grinding and polishing of old kota stone/marble/granite complete all as specified & directed. |
| 123 | M&L for welding in repair of doors/windows/grill any other iron items etc existing damage / broken hinges, handle, frame and any other parts of n. exc. 2.5 cm in length and n. exc. 6 mm in thickness to achieve smooth function complete all as specified & directed. (Note : 1. Skilled labour (welder) and welding items like hinges, handle, peg set etc also includes in the rate. |
| 124 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified & directed. |
| 125 | M & L for brick work with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & directed. |
| 126 | M & L brick work in half brick thick wall using Subclass B bricks built in cement mortar 1:6 complete all as specified & directed. |
| 127 | Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints, hacking for key, scrubbing with water etc. complete all as specified & directed. |
| 128 | M & L for rendering 15 mm thick on brick masonary surface or fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified & directed. |
| 129 | M & L for rendering 15 mm thick on brick masonary surface or fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified & directed. |
| 130 | M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement complete all as specified & directed. |
| 131 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling |
| 132 | M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified & directed. |
| 133 | M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint complete all as specified & directed. |
| 134 | M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling complete all as specified & directed. |
| 135 | M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of Oil bound distemper on ceiling complete all as specified & directed. |
| 136 | M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on walls complete all as specified & directed. |
| 137 | M&L for preparation of old plastered surfaces incluiding filling of depressions etc and applying one coat of oil bound distemper of approved tint complete all as specified & directed. |
| 138 | M&L for preparation of old plastered surfaces incluiding filling of depressions etc and applying two coat of oil bound distemper of approved tint complete all as specified & directed. |
| 139 | M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of cement base paint on walls complete all as specified & directed. |
| 140 | M & L for preparation of old plastered or unplastered decorated surfaces and applying two coat of cement base paint on walls complete all as specified & directed. |
| 141 | M&L for 1mm thick wall care putty including preparation of old and new plastered surfaces on walls etc.complete all as specified & directed. |
| 142 | M & L for Painting to old steel surfaces of any description over 10 cm in width or girth with one coat of synthetic enamel paint including preparatin of surfaces complete all as specified & directed. |
| 143 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel complete all as specified & directed. |
| 144 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying sizing,filler coat of shellac varnish or any other high glossy varnish as approved by engr in charge and staining in oil etc complete all as specified & directed. (Note: the finishing of varnish on wooden surface will be passed by Engr in charge) . |
| 145 | M & L Complete removal of existing treatment of old plastered surfaces of walls and Washing, rubbing down and stopping of painted surfaces and applying two coats of exterior acrylic emulsion paint by mechanical means over a coat of primer and including 1 mm thick wall care puttycomplete all as specified & directed.. (make- Apex ultima of asian, weather shield max of ICI/Dulux)Note : the surface should be even and smooth after applying the wall care putty irrespective of number of coating applied and as per direction of Engr in charge/GE |
| 146 | M&L for complete removal of existing treatment of old surface of internal surface of walls including brooming down / steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and oil and greasy spots and cleaning with water on wall and preparation of surface by applying 1 mm thick wall care putty and applying one coat of oil base primer followed by a base coat of textured paint (acrylic emulsion) of approved pattern / design as directed by Engr-in-charge all as per manufacture instruction etc complete all as specified and as directed. |
| 147 | Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ CGI Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, |
| 148 | Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ CGI Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, |
| 149 | Schedule of Credit Total in Figures 0.0 0.0 -9635.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Nine Thousand Six Hundred & Thirty Five Only Please Enable Macros to View BoQ information |
