Tender For Maintenance Of Roof Coverings Of Accn In Akhnoor Mil Stn Under Ge (S) Akhnoor.
Tender Value
22 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Akhnoor → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Roof Coverings Of Accn In Akhnoor Mil Stn Under Ge (S) Akhnoor.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling framed timber scantlings 40 sq.cm and over in section, in any position, complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed, complete all as specified and directed. |
| 3 | S&F for mild steel structural steel work as in roof trusses any description of steel member purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165), complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed. |
| 5 | Dismantling AC corrugated, semi corrugated sheets in roof covering, complete all as specified and directed. |
| 6 | M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 7 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 8 | Supply & fixing in position suspended false celling system using E Grid suspended celling Grid system. The size of Grid shall be 600X600mm with powder coated iron frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 6mm thick High Pressure Stream cured non primered classic/designer variant E-Board and to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof or with fasteners in RCC roof, including dismantling existing ceiling of any type, complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) any type and in any position not otherwise specifically provided for including old unserviceable bitumenous felt and other material upto four storey, complete all as spd and directed. |
| 10 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces on roof, finished even & smooth without using extra cement, complete all specified and directed. |
| 11 | M&L for water proofing treatment on roof top as follows:-(a) Applying a coat of bituminous primer confirming to IS:3384 at the rate of 0.40 Kg/Sqm.(b) Applying a coat of (bonding material) industrial bitumin 85/25 at the rate of 1.2 Kg per Sqm including cleaning of existing surface.(c) Laying APP based polymeric membrane minimum weighing 3Kg/Sqm minimum thickness 3mm reinforced with polyester non wove fabric (weight not less than 150gm/Sqm) land on prime surface with lap as per SSR Part-I 2009, by forced and torch application.(d) Sealing of lap joints with bitumen grade 85/25 @ 1.20Kg/Sqm and fine sand in dry condition @ 0.50Kg/Sqm after laying the membrane. |
| 12 | M&L for preparation of new or previously untreated surface of any description, not otherwise descri-bed, over 10cm width or girth and applying a coat of aluminium paint upto four storey, complete all as specified and directed. |
| 13 | M&L for providing 20mm thick precast cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, roof flat surfaces, and cut and polished over 15mm thick bedding layer of cement mortar (1:6) , upto four storey, complete all as specified and as directed. |
| 14 | S&F for expended wire mesh (Chiken wire mesh) with galvanised wire and made as twisted into hexagonal structure upto four storey, complete all as specified and directed. |
| 15 | M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) in two layers (each 20mm) as in floor roof finished the surface even and smooth etc. upto four storey, complete all as specified and directed. |
| 16 | M&L for forming false groove of 450x450mm by using any method, complete all as specified and directed at site by the Engineer-In-Charge. |
| 17 | Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed. |
| 18 | M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 19 | Description all as per serial item No. 18 here in above but except brick, complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement, complete all specified and directed. |
| 22 | M&L for applying wall putty 2mm thick over & above, complete treated or untreated surface complete all as specified and directed. |
| 23 | M&L for preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint over a coat of primer, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender