|
| 1 | Engagement of labour |
| 2 | Skilled labour |
| 3 | unskilled for site clearance , headload , dismantling etc |
| 4 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4: 8 or leaner mix (i/c equivalent design mix) |
| 5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 6 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 7 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 8 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | Washed stone grit plaster on exterior walls above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2 , top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge, including scaffolding as per existing skims pattern using wooden batten 20mmx15mm and finishing the groove as per specifications, complete job. |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 19 | Extra for half Brick masonry in superstructure above plinth level upto floor V level.. |
| 20 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry |
| 21 | P/L of 15mm thick cement plaster of mix 1:4(1cement:4fine sand) |
| 22 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 23 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood |
| 24 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, With resin bonded fiber glass wool with density 16 kg/cum |
| 25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1cement :3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete of size 600 by 600 mm 1:4(1 cement: 4 coarse sand) |
| 27 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in walls ,skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 29 | Providing and fixing in position pre-moulded joint filler in expansion joints |
| 30 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws budloo/fir wood |
| 31 | P/F of 10 mm thick commercial plywood of approved make and manufacture in all types of work fixed with nails and wood screws etc.complete. |
| 32 | P/f wooden panneling using wooden tiles of approved pattern (tounged and grooved) |
| 33 | P/F woodwork in frames of doors windows clerestory window and other frames ,wrought framed and fixed in position of 1st class kail wood |
| 34 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.20 mm first class kail wood. |
| 35 | Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. 2nd class kail |
| 36 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required |
| 37 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) |
| 38 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 39 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 40 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :G.S. Sheet |
| 41 | Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: |
| 42 | Labour for Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 43 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 44 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks,screws , washers, nails etc including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick |
| 45 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts or screws , washers complete. (0.50 mm thick) |
| 46 | Providing and fixing 12 mm thick toughened glass in wooden frames complete job |
| 47 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 48 | Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 49 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia.and size including Necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 50 | P/f of ACP in Partitions Shutters Frames Etc including cost of Rubber in neoprene gasket including cost of silicon and taping etc complete job(3mm) thick |
| 51 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 52 | P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete(Subject to Actual) |
| 53 | Applying priming coats with water thinable cement primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 54 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats.(New Work). |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 56 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 58 | carriage of material |
| 59 | Sand 12 km avg lead |
| 60 | aggregates 20km avg lead |
| 61 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
| 62 | 15 mm dia. nominal bore |
| 63 | 20 mm dia. nominal bore |
| 64 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls, excavation work and refilling etc.complete.etc.(internal/external) 15mm dia |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls, excavation work and refilling etc.complete.etc.(internal/external) 20mm dia |
| 66 | Providing and fixing of PVC pipes of approved make and quality |
| 67 | 100 mm dia |
| 68 | 75 mm dia |
| 69 | 50 mm dia |
| 70 | Providing and fixing of PVC fittings and fixtures as approved. |
| 71 | Plain bend 100mm |
| 72 | Plain bend 75mm dia |
| 73 | Floor trap 100mm dia |
| 74 | Collar 100mm dia |
| 75 | P- trap 100mm dia |
| 76 | Collar 75mm dia |
| 77 | Elbow 50mm dia |
| 78 | Tee 100mm dia |
| 79 | Tee 75mm dia |
| 80 | Tee 50mm dia |
| 81 | Providing and fixing of G.I fittings and fixtures (Approved Quality as directed by Engineer Incharge) |
| 82 | Elbow 15mm dia |
| 83 | Tee 15 mm dia |
| 84 | Cross over |
| 85 | Nipples 15x 100mm |
| 86 | Nipples 15x 75mm |
| 87 | Tanky Nipples 20mm |
| 88 | Reducer 15x20mm |
| 89 | Nipples 20x 100mm |
| 90 | Elbow 20mm |
| 91 | Tee 20mm |
| 92 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm dia |
| 93 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm dia |
| 94 | P/F of hardware fittings |
| 95 | Rod lock 11\\" |
| 96 | Rod lock 8\\" |
| 97 | hinges 125mm |
| 98 | Aluminium handle 150mm |
| 99 | tower bolt 150mm |
| 100 | oramental handle 150mm |
| 101 | oramental handle 200mm |
| 102 | Providing and fixing of sanitary fittings of standard quality. |
| 103 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 104 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.14.79.2 Orissa pattern W.C Pan of size 580x440 mm |
| 105 | Providing and fixing controlled flush, low level PVC cistern controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White |
| 106 | C.P health faucet with 1 mm C.P chain |
| 107 | looking mirror (12” x 18”) |
| 108 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 109 | C.P angle valve 15 mm |
| 110 | C.P wall mixer |
| 111 | C.P Soap case |
| 112 | PVC waste pipe |
| 113 | C.P nipple 15x25mm, 15x40mm, 15x50mm |
| 114 | C.P towel rod |
| 115 | PVC connection(24”) |
| 116 | PVC connection(18”) |
| 117 | Geyser bolt set |
| 118 | C.P gratings 100mm |
| 119 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixereach |
| 120 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 121 | C.P waste for basin |
| 122 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 123 | carriage for bricks for avg lead of 28km Please Enable Macros to View BoQ information |
