|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Surface dressing n exc 15 cm deep and averaging depth 15 cm and getting out in hard dense soil complete all as specified and directed. |
| 3 | M & L Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified and directed. |
| 4 | M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slopecomplete all as specified and directed. |
| 5 | S&F providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine river sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 6 | S&F providing and laying 80mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine river sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 7 | M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread, levelled and rammed in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 8 | M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete all as specified and directed. |
| 9 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed. |
| 10 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors complete all as specified and directed. |
| 11 | S&F 110mm bore PVC (SWR) bend in any radius, jointed solvent cement complete all as specified and directed. |
| 12 | S&F 75 mm bore PVC (SWR) bend in any radius, jointed solvent cement complete all as specified and directed. |
| 13 | Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation/ soak pit etc and getting out in soft/ hard disintegrated rock complete all as specified and directed . |
| 14 | M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for Brickwork, with subclass ‘B’ bricks in one brick thick honey comb work, built in cement mortar 1:4 complete all as specified and as directed. |
| 17 | M&L for brickwork, Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed. |
| 18 | M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread, levelled and rammed in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 19 | S&F 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars including testing complete all as specified and as directed. |
| 20 | M&L concrete bed of PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for drain pipes bedding & haunching against the sides complete after pipes are laid, jointed and tested complete all as specified and as directed.Note:-(i) Thickness of bed below the barrel of pipes: 10cm for 150mm dia |
| 21 | Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching ,kerbs compelete all as specified and directed |
| 22 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:6 incl demolition of old cover slab complete all as specified and as directed. Note:- (Reinforcement steel will be measured and paid separately under relevant item. |
| 25 | M&L TMT reinforcement bars 10mm and over using cut to length, bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and as directed. |
| 26 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping slightly rounded or chamfered angles and necessary form work finishing exposed surface complete all as specified and as directed. |
| 27 | Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends. |
| 28 | Supply only half burnt broken bricks size 50 to 100mm graded for loose filling etc complete all as specified and as directed. |
| 29 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed |
| 30 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 31 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 32 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 33 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.11sqm but not exc 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 34 | M&L glazed ceramic colour tiles with matching highlighter in vertical surfaces ( design and pattern as approved by EinC) of size not less than 600x300 x 7-8mm thick set and jointed in neat cement slurry fixed over and incl 10mm thick rendering in CM (1:4) as in backing coat and pointed in white cement including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 35 | M&L for heavy duty any shade, anti skid ourdoor tiles of 8-10mm thick (square/rectangular) area of each tiles 0.18 sqm but nexc 0.36 sqm as in floor, providing durability, low porosity for extra wear etc set and jointed and pointed in chemical resistant mortar, resin type, in floors over and including screed bed or bedding layer in 15 cm thick cement mortar in CM 1:6 complete all as specified and directed. |
| 36 | M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 37 | M&L for preparing of newly plastered surface of walls and applying two coats of cement based paint over a coat of primer etc complete all as specified and directed. |
| 38 | S&F for vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm PTMT waste coupling and 32mm corrugated waste pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | S&F urinal bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) but incl PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing complete all as specified and as directed. |
| 40 | S&F vitreous china wash down water closet pan (Europeon), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed. |
| 41 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed |
| 42 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 43 | S&F Health faucet( ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixd in position complete in all respect as specified. |
| 44 | S&F in repairs 15 mm bore fancy type CP tall pillar taps (having weight not less than 0.665 kg as per SSR Part-I clause 18.16.2 ) cast copper alloy with capstan heads, screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 45 | S&F in repairs fancy type long body CP bib taps 15 mm dia (having weight not less than 0.575 kg as per SSR Part-I clause 18.15.1 ) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified. |
| 46 | S&F in repair 15mm dia CP stop valve/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 47 | S&F two way, bib tap , chrominium plated of 15mm dia complete all as specified and as directed. |
| 48 | S&F glass shelf with CP bracket 55cm (min) long incl necessary fixing screws and PVC rawl plugs complete all as specified and directed. |
| 49 | S&F CP towel rail 20mm dia and 600mm long fixed with and incl SS screws complete all as specified and directed. |
| 50 | S&F PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed. |
| 51 | S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80cm upto floor trap complete all as specified and directed. |
| 52 | S&F of GI tubing Dia 15 mm dia 'medium grade' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete complete all as specified and as directed. |
| 53 | S&F of GI tubing Dia 20 mm dia 'medium grade' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified and as directed. |
| 54 | Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good with cement plaster, cutting not exc 10 cm girth |
| 55 | S&F of 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 56 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor or fixed to walls incl taking down existing damaged pipe with all fittings complete all as specified and directed. |
| 57 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls incl taking down existing damaged pipe with all fittings complete all as specified and directed. |
| 58 | S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door complete all as specified and as directed. |
| 59 | S&F in repair Grating doom 100mm dia of PTMT jointed with solvent cement complete all as specified and directed. |
| 60 | S&F 5mm thick Looking mirror glass of selected quality in required size , framed with plain PVC or wood strip frame and mounted on wood sheet and fixed with screws all as specified and directed |
| 61 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 62 | S&F factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 45x75mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame density of 750kg/cum screw withdrwal strenth of 2200 N (Face) and 1100N (Edge) minumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/lug/SS dash fasterrs of required ida and length complete as per direction of Engineer in charge (MS hold fast/lug or SS dash fastteners shall be paid fo rseparatelly) Note:- WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 63 | S&F “RAJSHRI” Brand factory made 30mm thick 100% solid WPC ( Wood polymer Composite ) solid plain or moulded flush door shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers (wood powders/ rice husk/ wheat husk ) and non toxic additives, made from extrusion process WPC foam sheet single extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinely panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 64 | S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 65 | S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. |
| 66 | S & F stainless steel 100mm size Butt hinges, medium weight cold rolled, and fixed complete all as specified and as directed. |
| 67 | S&F aluminum tower bolts of extruded section of size 150mm complete all as specified and directed. |
| 68 | S&F 150 m size extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 69 | S&F 250mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 70 | S & F SS wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum frame and necessary screws complete all as specified and as directed. |
| 71 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame and shutters for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and as directed. |
| 72 | S&F 3mm thick figured glass with oil putty, ordinary quality not exc 0.5sqm in each pane complete all as specified and as directed. |
| 73 | M & L PCC 1:3:6, type C1 (using 20 mm graded agg) as in plinth protection including demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above ground floor) and finished fair and even laid in bays and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen 1:3 complete all as spec and directed |
| 74 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil |
| 75 | M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in post hole complete all as specified and directed. |
| 76 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410 -W (Gde- E- 250) quality-A. |
| 77 | Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 incl dismantling of old structural steel all as specified and directed. |
| 78 | S&F mild steel works as in fencing, posts & struts embedded in stone masonry/ bricks works including cutting tops to shape as directed, drilled holes notching for wires flat iron fillets (for securing wire mesh etc) inlcuding all drilling, bolting or riveting etc and similar work conforming to Fe-410 or Fe-310-0 complete all as specified an directed |
| 79 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 80 | S&F 2mm thick ,fibre glass reinforced translucent plain sheeting of approved color and texture with side lap fixed with L type or J type or cranked hook bolts,complete all as specified and directed |
| 81 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. |
| 82 | M&L for preparation of new plastered surfaces in walls soffits, facia, chajjas and applying two coat of cement base paint complete all as specified and directed. |
| 83 | M&L for concealed point wiring incl taking down for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates) |
| 84 | All as per Srl item No 82.00 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. |
| 85 | All as per Srl item No 82.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. |
| 86 | All as per Srl item No 82.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 87 | S & F in replacement modular switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed. |
| 88 | S&F in replacement modular socket outlet 2-in-1, 5pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 89 | S & F in replacement modular switch, one way, 16 Amp, one module, 240 volts complete all as specified and directed. |
| 90 | Supply and fixing in replacement modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, complete all as specified and directed. |
| 91 | S&F in replacement ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated ISI marked all as specified & directed by Engineer - in - Charge. |
| 92 | S & F in replacement modular lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed by Engineer - in - Charge. |
| 93 | Supply & fixing in replacement LED tube light complete fitting 20 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge . |
| 94 | Supply & fixing in replacement LED light fitting mirror type with high out put 2 feet , 10 watt 220 V AC connecting up with three core flexible coppder conductor cable of suitable sixe complete all as specified and directed by Engineer in charge . |
| 95 | S & F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed by Engineer in Charge |
| 96 | S & F in replacement sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. |
| 97 | S & F in replacement sheet metal enclosure, double door type, surface mounted concealed in wall 4 ways, 240 Volts, ISI marked 200 amps, bus bar dust and vermin proof IP-54 protection suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. |
| 98 | S & F in repairs MCB, SP suitable for 240 volts, AC supply 6 to 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SP complete all as specified and directed by Engineer - in - Charge. |
| 99 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 100 | S&F in replacement building security light fitting complete with 36 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution (IP66) complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with three core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 101 | Supply and fix in replacement heavy duty exhaust fan, steel body, AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and directed. |
| 102 | Supply and fix exhaust fan, made of sturdy engineering plastic body, AC single Phase. 230V, 5 Hz RPM 1200 copper winding of size 300m sweep with, blades, and frame and louvers all as specified and directed. |
| 103 | M&L in replacement earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 104 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft disintegrated rock complete all as specified and directed. |
| 105 | M&L local river sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 106 | M&L for providing of un-reinforced precast concrete cable cover class LV, Type 1 size 250mmx 150mm x 40mm laid flat dry for protection of under ground cable complete all as specified and directed.class,, flat, |
| 107 | Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 4 core all as specified & directed. Note:- Excavation & earth work and pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item of this schedule. |
| 108 | M & L GI Tubing \\"light grade\\" galvanized for protection LT Cable all as specified of size 40 mm bore complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F LED tube light fitting bright 20 Watt slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector complete all as specified and directed. |
| 110 | S&F LED tube light fitting bright 10 Watt slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector complete all as specified and directed. |
| 111 | S&F LED garden light(Bamboo Led Bollard) new generation energy saving enviroment friendly, long life aesthetically designed aluminium landscape IP-65 liminaire for diffused lighting with high power LED as source complete all as specified and directed. |
| 112 | Supply and fix in replacement GI tubing 'medium grade' of size 20 mm dia ISI Mark galvanised laid in floors/walls including fittings such as bends elbows reducers and complete accessories complete all as specified and directed. |
| 113 | Supply and fix PVC insulated PVC sheathed, flexible circular cable 3 core 2.5 sqmm stranded copper conductor AC 230 V complete all as specified and directed. |
| 114 | Supply and fixnon mettalic heavy grade PVC conduit, ISI marked of size 20mm dia including all accessories complete all as specified and directed. |
| 115 | Supply and fixing in replacement Gun metal gate valve/glove valve ISI marked with Iron wheel head screwed both end for GI tubing of size 20 mm dia complete all as specified and directed. |
| 116 | Constructions of brick masonry valve pit of size 450mmx450mmx450mm (internal dimensions) one brick thick wall in cement mortar (1:4) on 100 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation, 15mm thick rendering internally, externally up to 15 Cms below GL provision of valve pit cover made out of 3mm thick MS plate welded with 40 x 5mm thick F1 frame all round including provision of hinges, handles, locking arrangement, ISA 40 x 40x 5mm frame, fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC 1:2:4 type B1 (Block size 230 x 200 x 100mm) including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) and necessary earth work in soft/loose soil complete all as specified and directed. |
| 117 | S&F in replacement 1000 ltrs capacity Rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in IS Code -12701-1996 including20mm dia tank nipple complete all as specified and directed |
| 118 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 119 | Deduct Schedule of credit (calculation will be done off line) Rs. 3006.50 Please Enable Macros to View BoQ information |
