|
| 1 | Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each all as specified. |
| 2 | Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each all as specified. |
| 3 | Taking down shutter of any description exc. 1.00 Sqm & nexc. 2.00 Sqm each all as specified. |
| 4 | M&L for 30 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 5 | S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 6 | M&L glazed & skeleton shutters 35mm thick 2nd class Hard wood open rebated & prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels all as specified. |
| 7 | S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 8 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 9 | S&F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed. Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by AGE(I) (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. |
| 10 | S&F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-charge. Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by AGE(I) (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. |
| 11 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh) with following specification complete all as specified and as directed by Engineer-in-charge.(i) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (ii) Sliding shutter frame of cross section 40 x 18mm(iii) 4 mm thick glass superior quality. (Min)(iv) IDPE Rubber guasket for fixing of glass.(v) Locking cleats per shutter -01 Nos. (Min)(vi) Sliding rollers per shutter - 02 Nos. (Min)(vii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. |
| 12 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 13 | S & F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed.(a) Cross section of chowkhat frame 101.60x44.45mm(b) Cross section of hanging and meeting style 83x44mm(c) Top rail of cross section 114x44mm(d) Bottom rail of cross section 114x44 mm (e) Locking rail (middle rail) of cross section 83x44 mm(f) 4 mm thick glass superior quality. (Min)(g) Aluminum handle eisc type -02 Nos per shutter (inside & out side).(h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside).(j) Concealed Lock with key superior quality makae and type as approved by AGE(i) openable both from inside & out side -01 Nos per shutter. |
| 14 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories Area not exceeding 2.00 sqm each.(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 15 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm), sash. T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners-5mm thick glazing with selected quality glass. Area exceeding 1.00 Sqm but not exceeding 2.00 sqm each.(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 16 | Supply and fixing factory made uPVC door frame made of uPVC . Extryded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance + 1mm), with wall thickness 2.0mm (+ 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S tube of size 19x19mm and 1mm (+ 0.1 mm) wall thicknes and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per direction. |
| 17 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, fram (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware:[casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 18 | S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed. |
| 19 | S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked) |
| 20 | S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 21 | S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 22 | S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 23 | Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron). |
| 24 | S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto 3rd storey with necessary scaffolding), all as specified. |
| 25 | S&F in repair 4 mm thick Figured glass, pin head type and glazing for window/ventilators in squares n exc 0.5 sq. m in each pane complete all as specified. (ISI Marked) |
| 26 | S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed. |
| 27 | S&F in repair 25 mm dia of anodised aluminium alloy, chromium plated drappery curtain rod with fixing bracket complete all as specified and directed. |
| 28 | Preparation of old/new surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.complete all as specified. |
| 29 | All as per item No. 28 above but on steel surfaces, complete all as specified and directed |
| 30 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar. |
| 31 | M&L for chequered cement concrete tiles with grey cement and pigment of size n exc 0.16 Sqm and minimium 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified |
| 32 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed. |
| 33 | M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed. |
| 34 | M & L for machine cut kota stone slab in flooring or in verticle surface 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and laid over and including and polishing complete all as specified and as directed. |
| 35 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 36 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed. |
| 37 | M&L for scratch free Vitrified Tiles 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm (ie) of size 600x600mm in floors & Skirting/Dado or all verticle surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified |
| 38 | All as per item No. 37 above but as skirting or verticle surface complete all as specified and directed. |
| 39 | M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 40 | M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 41 | M&L for glazed ceramic coloured tiles area of each tile not exceeding 0.14 sqm as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:6) complete all as specified and as directed. |
| 42 | M&L for Endura (Parking Tiles) coloured tiles 7-8mm thick of size 300x300x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 43 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | M&L PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 45 | M&L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 46 | Demolition of brick work or stone boulder masonary built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed. |
| 47 | M&L for fly ash bricks,with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 48 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 49 | M&L for rendering 15mm thick in CM 1:4 on External faces (Exposed to weather) of brick or concrete surface of wall with liquid water proofing compound @ 200 ml per bag and finished even and smooth without using extra cement complete all as specified and as directed. Note:-(a) The Cost of Liquid water proofing compound included in the iteam and not to be paid separately |
| 50 | M&L for rendering 10 mm thick in CM ( 1:6 ) on Internal faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed. |
| 51 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for applying two coats of first quality oil emulsion distember over a coat of primer over a coat of Acrylic / Water proofing wall Putty on walls complete all as specified . Note:- Putty shall be measured and paid seperately under relevant item. |
| 53 | Material and labour for New plastered surfaces of wall,pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item (c) Putty shall be measured and paid seperately under relevant item. |
| 54 | Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over primer of same make white cement based putty (where it is required in patches) all as specified and directed. Putty shall be measured and paid seperately under relevent item).Make Asian- Apex or Equivalent |
| 55 | Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base white cement based putty (where it is required in patches)all as specified and directed. Make Asian- Apex or Equivalent. Putty shall be measured and paid seperately under respective item) |
| 56 | M&L three coats of white washing on newly/Old plastered or concrete celling sufaces incuding preparation of surfaces. |
| 57 | M&L for removal of complete existing treatment of Internal/External wall and surface finished even and smooth with sand paper complete all as specified and directed. Note: Complete Removal is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. |
| 58 | M&L for preparation of newly plastered surface of wall and and applying 2mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick ) and surface finished even and smooth with sand paper complete all as specified |
| 59 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store. |
| 60 | Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 61 | Supplying and laying of 20 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 62 | Supplying and laying of 25 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 63 | S&F in repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. |
| 64 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as spd and directed. |
| 65 | S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed |
| 66 | Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including connection to drain or out going pipe and to flushing pipe including Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed. |
| 67 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 68 | S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition). |
| 69 | S&F in repair PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend complete all as specified. |
| 70 | S & F in repair PVC (SWR) Nahani trap 75 mm dia with grating including jointing with solvent cement complete all as specified. |
| 71 | Dismantling of cast iron/PVC Pipe 75mm to 150mm dia or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified. |
| 72 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 73 | Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed |
| 74 | Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed |
| 75 | Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed |
| 76 | S&F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed. |
| 77 | S&F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed. |
| 78 | M&L for applying Asian Royale play textured wall paint over prepared surface of wall with white cement base putty and design approved by Engineer-in-charge complete all as specified and directed. Please Enable Macros to View BoQ information |
