Tender For Improvement Of Fatehgarh Churian Dera Baba Nanak Road At Rd. 0.900 To 1.084 R.H.S. In District Gurdaspur For The Year 2026-27, Fatehgarh-Punjab
TDR : 56019817
Tender Notice
BOQ
5 Days Left
Fatehgarh
Punjab
Tender For Improvement Of Fatehgarh Churian Dera Baba Nanak Road At Rd. 0.900 To 1.084 R.H.S. In District Gurdaspur For The Year 2026-27
Name of Work:- Improvement of Fatehgarh Churian Dera Baba Nanak Road at Rd. 0.900 to 1.084 R.H.S. in District Gurdaspur For the year 2026-27
Sl. No.
Item Description
1
Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications.
2
Construction of Shoulder with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage of site of work, spreading, grading to required slope and compacting to meet requirement as per Clause 3003 of MORT&H Spceification.
3
Cement concrete 1:3:6 with stone ballast mixing by mechincal means
4
Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering offree water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
5
Road Marking with thermoplastic compound 10 cm wide edge line on Curve & Junction only (and Zebra crossing at Education Institutions, Hospitals, etc.
6
Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications (CSR 24.63)
7
Add 1% Cultrual Cess Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
