|
| 1 | Maintenance of Railway Track in the Marshalling Yard and Wharf area of New Mangalore Port (8.10 KM) for three years BID PRICE SHEET S.no Description of work Estimated Cost (in Rs.) % above / below estimated cost Amount (Rs.) 1.0 Schedule-A: Day to Day Track Maintenance for Three years 36118380.07 2.0 Schedule-B: Special Track Works 3240314.0 3.0 Schedule-C: Ballast Related Works 17502420.0 4.0 Schedule-D: Supply of P.Way Items (Non steel items) 10476806.06 5.0 Schedule-E: Supply of P.Way Items (Steel Items) 8033574.0 6.0 Schedule-F: Supply of Machinery 4162310.0 Total 79533804.0 Total Quoted Price in Figure Total Quoted Price in words Schedule A: Day to Day Track Maintenance for Three years Sl.No. S.Rly USSOR 21/ RVNL SBOQ -2022 Description of Item Unit Qty Rate Amount |
| 2 | 131010.0 a 131012.0 For other than PSC Sleeper Track with Sleeper Density of 1340 Sleepers/Km (M+4) Track Meter 24300.0 108.41 2634363.0 |
| 3 | 131050.0 a 131051.0 1 in 8½ PSC layout Set 48.0 13784.69 661665.12 |
| 4 | 83010.0 |
| 5 | SR USSOR-2021 A 62011.0 For location of work not involving deep screening Each 1540.0 411.62 633894.8 |
| 6 | 74030.0 a 74031.0 1 in 8½ Switch Assembly Set 16.0 16330.51 261288.16 |
| 7 | 74020.0 a 74021.0 1 in 8½ Turnout Set 16.0 4585.47 73367.52 |
| 8 | RVNL SBOQ - 5007 B |
| 9 | 133010.0 a 133011.0 For rails up to 13 metre length Meter 500.0 43.47 21735.0 b 133012.0 For rail panel above 13 metre & up to 40 metre length Meter 500.0 47.87 23935.0 |
| 10 | 64020.0 a 64021.0 On Cess Each 100.0 300.89 30089.0 b 64022.0 In-situ situation Each 100.0 431.5 43150.0 |
| 11 | 64030.0 a 64031.0 On Cess Each 100.0 391.16 39116.0 b 64032.0 In-situ situation Each 100.0 573.97 57397.0 |
| 12 | 64040.0 a 64041.0 Hole of dia. 26.5mm and above Each 1000.0 349.3 349300.0 |
| 13 | RVNL SBOQ-2022 a 5003 (I) (i) Total Lead exceeding 50 m but up to 5km CUM 9000.0 325.58 2930220.0 |
| 14 | 63090.0 |
| 15 | 63050.0 b 63052.0 For 610 mm long fish plates. Each 1246.0 105.55 131515.3 |
| 16 | 131020.0 a 131021.0 For PSC Sleeper Track Meter 4455.0 107.85 480471.75 |
| 17 | 171030.0 a 171031.0 For lead up to 500 metre. MT 150.0 461.78 69267.0 b 171032.0 For lead beyond 500 metre and up to 1 Km. MT 150.0 596.36 89454.0 c 171033.0 Extra to Items no.171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km MT 150.0 71.52 10728.0 |
| 18 | 172030.0 a 172031.0 For lead up to 500 metres MT 300.0 359.58 107874.0 b 172032.0 For lead beyond 500 metre and up to 1 Km MT 300.0 534.13 160239.0 c 172033.0 Extra to Items no.172032 for lead beyond 1Km for every subsequent Km or part thereof and up to 10 Km MT 300.0 55.78 16734.0 |
| 19 | 172040.0 a 172041.0 172041 Lead up to 5 Km MT 300.0 198.97 59691.0 b 172042.0 172042 Lead beyond 5 Km and up to 10 km MT 300.0 245.61 73683.0 |
| 20 | 132010.0 a 132012.0 For PSC sleeper Track with Sleeper Density less than 1540 sleepers/Km Track Meter 10000.0 162.84 1628400.0 |
| 21 | 131070.0 |
| 22 | 134010.0 a 134011.0 Other than PSC Sleeper track - Maximum slew up to 50mm Track Meter 400.0 128.28 51312.0 b 134012.0 Other than PSC Sleeper track-Maximum slew more than 50mm and up to 100mm Track Meter 400.0 152.63 61052.0 c 134013.0 Other than PSC Sleeper track-Maximum slew more than100mm and up to 150mm Track Meter 100.0 169.82 16982.0 d 134014.0 Other than PSC Sleeper track - Maximum slew more than 150mm Track Meter 100.0 189.89 18989.0 |
| 23 | 63110.0 |
| 24 | 136100.0 |
| 25 | 137020.0 a 137021.0 For 60 Kg Rails Track Meter 0.0 104.61 0.0 b 137022.0 137022 For 52 Kg Rails Track Meter 22300.0 92.94 2072562.0 |
| 26 | 137030.0 |
| 27 | 63130.0 a) 63131.0 GRSP Each 12000.0 25.12 301440.0 b) 63132.0 ERCs Each 12000.0 8.39 100680.0 c) 63133.0 Metal/GFN Liners Each 12000.0 5.59 67080.0 |
| 28 | 63140.0 |
| 29 | 63100.0 |
| 30 | 83030.0 |
| 31 | 211210.0 |
| 32 | 136140.0 |
| 33 | 136142.0 136142.0 For Night shift Each 540.0 1232.05 665307.0 |
| 34 | 63120.0 63122.0 By using Contractor's Grease Graphite Each 3000.0 46.38 139140.0 |
| 35 | VOCPA Track Maintenance IPRCL/Chennai/VoCPT/Track Maintenance/1/8834 dt 11.11.2022 schedule A Item No 18 |
| 36 | RVNL SBOQ 5047 |
| 37 | (Government of India Ministry of Labour & Employment Office of thc Chief Labour Commissioner(C) Office Order dated File No.l /6( I )/2025 L.S II dt 25.09.2025 |
| 38 | RVNL SBOQ 9003 b RVNL SBOQ 9003 b Providing Road Vehicle mentioned below for the use of Engineer/Employer as per the Conditions mentioned in Clause 3.4.2 & 3.4.3 of Chapter 3 (Site Facilities for the Employer and the Engineer) of Section 5 Work's Requirement) of Tender Documents. Note: The provisions of clause 12.3.1 (a) (ii) of Section 6 (GCC) of the Contract shall not be applicable for appropriateness of new rate for this item. |
| 39 | TOTAL 36118380.07 Schedule B: Special Track Works Sl.No. S.Rly USSOR 21 Description of Item Unit Qty RATE Amount |
| 40 | 183020.0 |
| 41 | 81020.0 a) 81021.0 Depth of 150 mm below bottom of sleeper - For Plain Track : Track Meter 2000.0 514.46 1028920.0000000001 |
| 42 | 181010.0 |
| 43 | 92020.0 a) 92021.0 For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble , 3 pieces Mould (Zircon washed) and Compressed Air Petrol/LPG pre heating technique each 0.0 2383.38 0.0 b) 92023.0 For 52Kg-90UTS or 52Kg 72UTS Rail,Single shot crucible fitted with Automatic Tapping Thimble Technology, 3pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. each 100.0 2199.7 219969.99999999997 |
| 44 | 64050.0 a) 64052.0 Rail section of 52Kg and above Each 200.0 133.96 26792.0 |
| 45 | 186012.0 TOTAL 3240314.0 As Per Variation 03 S.No Description Unit Accepted Rate Quantity Amount |
| 46 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's \\"Manual for Fusion Welding of Rails by Alumino - Thermic Process\\" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Welding portion and related accessories as per Annexure - I shall be supplied by Railways. All other items required shall be supplied by the Contractor. 2. Welding shall be carried out only by trained welder having valid competency certificate. 3. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 4. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge a) For 52 Kg - 90 UTS or 52 Kg 72UTS Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. each 1809.69 23 23 300.0 542907.0 53.0 |
| 47 | Scattered renewal or replacement of missing / worn-out fittings with Railway's fittings for track/Points & Crossings sleepers including leading to required location for the work and the released fittings shall be collected and neatly stacked, as directed by the Engineer In charge. Note: New fittings shall be supplied from and released material shall be deposited at, nearest P.Way Stores. a) ERCs each 6.9 23 23 9600.0 66240.0 8809.0 b) Metal/GFN Liners each 4.6 23 23 12000.0 55199.99999999999 8374.0 |
| 48 | Gas cutting of rail of various sections with contractor‟s tools & plants, as directed by engineer in-charge : a) Rail section of 52Kg and above Each 110.21 23 23 350.0 38573.5 27.0 |
| 49 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. |
| 50 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. |
| 51 | Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site a) JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity Hour 774.54 23 23 2400.0 1858896.0 911.6 |
| 52 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. Schedule C: Ballast Related Works Sl.No Description of the Item Unit Qty Rate Amount |
| 53 | Manufacturing, supply and stacking of machine crushed Track Ballast conforming to RDSO Specification (IRS-GE-1) with latest correction slips at Railway depot or nominated location When distance of nearest quarry is more than 50km and upto100km a 1st year Cum 3000.0 1850.64 5551920.0 b 02nd year Cum 3000.0 1943.17 5829510.0 c 03rd year Cum 3000.0 2040.33 6120990.0 TOTAL 17502420.0 Schedule D: Supply of P.Way Items (Non steel items) Sl.No. Description of Item Unit Qty Rate Amount |
| 54 | Supply of grease graphite grade \\"O\\" confirming to IS 408/81 reafirmed: 1993 of reputed manufacture. As per A/L.No.8313/Lines-II/14-15/Misc P.Way works/Improvement/R & D yard/DKMR Dt.16.01.2015 |
| 55 | Supply of Grooved Rubber Sole Plates for 1 in 8.5 turnouts for layout Drg no. T-4865 with latest alterations if any, complete set for the turnout as per IRS specification for Grooved Rubber Sole Plate (6mm thick) for placing beneath rails Sl. No. T-47-2006 with up to date corrigendum if any |
| 56 | Supply of Grooved Rubber Sole Plate to RDSO Drg. No.T-3711 (upto date Alteration) conforming to IRS Specification for 6 mm thick grooved rubber sole plates (Provisional) 1987 revised 1997. |
| 57 | Supplying of GFN Liners 52/60 kG to RDSO Drg. (upto date Alteration) conforming to IRS specification |
| 58 | Supply of 60kg. Prestressed monoblock Concrete Sleepers (Pretensioned type category-1) as per RDSO Drg No. T-2496 and IRS Specification T-39 (with latest alterations if any ) |
| 59 | Supplying at site of work including leading, loading, unloading and stacking PSC turnout sleepers and approach sleepers for fanshaped layout of 60 kg 1 in 8.5 turnout for B.G 60 Kg. (UIC) rail/52 kg rails to RDSO Drg. No. T-4865 Alt-5 (for general layout) and drawings thereof with latest alterations if any, complete set with contractor's labour, materials, tools & Plant, equipment and machinery, transport etc complete . Total 10476806.06 Schedule E:Supply of P.Way Items (Steel Items) Sl.No. Description of Item Unit Qty Rate Amount |
| 60 | Supply of PSC sleepers for level crossings as per RDSO Drawing No. T-4148 for 60 KG rail. |
| 61 | Supply of Double Coil Spring washer as per RDSO drg no T-1214 conforming to IRS Specification For Spring washer-1980. |
| 62 | Supply of Nut and Bolts with washers of all sizes |
| 63 | Elastic Rail clips with flat toe (MK.III) to RDSO Drg. No.T-3701 (Alt.3) conforming to specifications IRS-T-31/92. |
| 64 | Supply of Elastic rail clips type'J' for use at fish plated joints as per RDSO Drg. No. T-4158 conforming to IRS Specification. |
| 65 | Manufacturing and Supply of Alumino thermic welding portions of 52Kg/60Kg/60EI-R260 as approved b RDSO for welding of rails 52Kg/60Kg/60EI-R260 kg for 25mm gap by the process of AT welding along with complete accessories confirming to the specification laid down in Indian Railway Standard specification No.IRST-19-2020 upto date correction slips with Single shot crucible fitted with Automatic Tapping Thimble,3pieces prefabricated mould (Zircon washed)manually pressed using compressed air petrol/LPG preheating for execution of welding of rail joint asdirected by the engineer in charge at site. Note: 1.The accessories along with welding portion shall be supplied asper Annexure-I of the IRUSSOR - 2021. 2. Rate is inclusive of transportation of above to SSE/P.Way stores. a) For 52Kg 90 UTS Rails Each 300.0 4193.16 1257948.0 |
| 66 | Supply of Fish Plates 52 kg as per RDSO Specification (1 Mtr long) |
| 67 | Supply of fish bolts with nuts for 60 KG, 52 KG rails as per RDSO Drawing No.T-1899, T-11501. |
| 68 | 13 mtrs IU Rail 60 kg |
| 69 | Supply of joggled fish plates (2 No. per set) with 4 pair clamps, 4 No. Bolts & Nuts and 8 No. special washers. a) For 52 KG as per RDSO Drawing No. EDO/T-620 or T-5848 set 50.0 5347.13 267356.5 |
| 70 | Curved Switch 60 kg 1 in 8 1/2 (T.4966) |
| 71 | Fittings for Curved Switch 60/52 kg 1 in 8 1/2 (T.4966/T.4866) |
| 72 | CMS Crossing with fittings and checkrail-60 kg T 4967 Total of Schedule C 8033574.0 Sch F:Supply of Machinery Sl.No Description of Item Unit Qty Rate Amount |
| 73 | Hiring of machinery for minor miscellaneous works for short duration, including operator/driver, fuel, lubricants and consumables. The Contractor shall arrange all statutory permits as required by rules and regulations, prevailing in the area of work. Payment shall be made for actual working hours at site. a JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity Hour 2000.0 941.46 1882920.0 b Hydra or similarty remounted Pick-n-Carry crane of 12 T capacity for misc. works of handling of materials. Hour 1000.0 1583.62 1583620.0 c Tractor with Trolley for local transportation or other misc. works. Hour 1000.0 695.77 695770.0 Total 4162310.0 DETAILED ESTIMATE SL NO DESCRIPTION LENGTH CH - 24/550 |
| 74 | LENGTH OF TRACK ROAD NO 01 |
| 75 | LENGTH OF TRACK ROAD NO 02 LENGTH OF TRACK ROAD NO 03 1350.0 LENGTH OF TRACK ROAD NO 04 840.0 WHARF BEACH ROAD LC TO DE 2000.0 POINTS AND CROSSING 16 NOS ( 1 IN 8.5) APPROX 35 MTRS 1120.0 TOTAL 8092.0 SAY 8100.0 SL NO DESCRIPTION NOS LENGTH WIDTH HEIGHT QTY |
| 76 | PACKING |
| 77 | POINTS AND CROSSIG PACKING |
| 78 | LIFTING AND PACKING |
| 79 | LUBRICATION |
| 80 | LUBRICATION FISH PLATE |
| 81 | GAUGE FACE LUBRICATION |
| 82 | REMOVING OF WEEDS |
| 83 | RAIL PAINTING |
| 84 | TP M/L 11/300 16/900 5600.0 RD1 739.0 Ballast 3.0 1046.0 for increasing cushion 5600.0 6.0 0.2 6720.0 4.0 7.0 111.0 1407.0 11/844 13/251 1.407 9400.0 5.0 0.1 4700.0 5.0 1445.0 11420.0 6.0 1304.0 say 12000.0 7.0 12.0 20.0 1176.0 11/991 13/167 1.1760000000000002 MINI LOOP 670.0 COALYARD 850.0 CONNECTIONS RD1 EXT 500.0 108 TO 110 143.0 12/837 12/980 0.14300000000000068 6 to 8 100.0 14980.0 say 15000.0 3 years 45000.0 ERC LUBRI 15000*1.31*4*2 157200.0 |
| 85 | POINTS100,101,8,102,105,106,109,110,111,23,24,LOCOPT,150,154,151,7,9,10,11,12,13,14,15,16,112,107,113,114,108,17A,18,21,22,4,6,20,25,26 TRAP 1,2 60 kg 2.0 3 years 6.0 60 KG 21.0 52KG 17.0 |
| 86 | lifting and packing |
| 87 | Deep screening M/L 5600.0 |
| 88 | Systematic overhauling |
