|
| 1 | Dismantling H.C.I. pipe with fittings including melting lead caulked joints. (iii) 100 mm |
| 2 | (ii) 75 mm |
| 3 | Labour for dismantling G.I. pipe with fittings. (i) 15 mm |
| 4 | 20 mm |
| 5 | 25 mm |
| 6 | 40 mm |
| 7 | 50 mm |
| 8 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (c) 160 mm |
| 9 | (b) 110 mm |
| 10 | (a) 75 mm |
| 11 | x) Bend 87.5º (c) 160 mm |
| 12 | (b) 110 mm |
| 13 | (a) 75 mm |
| 14 | (ii) Plain Tee (c) 160 mm |
| 15 | (b) 110 mm |
| 16 | (a) 75 mm |
| 17 | xx) 125/110 P Trap with W.C. Ring 75 mm |
| 18 | xxviii) Reducing Tee (160 X 110 mm) 75 mm |
| 19 | xvi) Pipe Clip (c) 160 mm |
| 20 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground (iii) 160 mm |
| 21 | (ii) 110 mm |
| 22 | (i) 75 mm |
| 23 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes 15 mm |
| 24 | 20 mm |
| 25 | 25 mm |
| 26 | 40 mm |
| 27 | 50 mm |
| 28 | Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 29 | f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). |
| 30 | Supplying, fitting and fixing bib cock or stop cock. (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kgper sq. cm. (i) 15 mm |
| 31 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 32 | (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 33 | Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (ii) 32 mm |
| 34 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long |
| 35 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long |
| 36 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white |
| 37 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 38 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 39 | Supplying, fitting and fixing low-down cistern parts. (i) Internal fittings for cistern complete of approved make. |
| 40 | Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar orsimilar). |
| 41 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 42 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (iv) 50 mm dia |
| 43 | (vii) 25 mm dia |
| 44 | GST-18% (SGST=9% & CGST=9%) ADD |
| 45 | LABOUR WELFARE CESS = 1% ADD Please Enable Macros to View BoQ information |
