|
| 1 | Pole FoundationMaking PCC for leveling coarse of size 700mmx700mmx200mm, PCC for leveling coarse 1:4:8 and Making RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone/brick aggregate) 600mmx600mmx 900 using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C,using shuttering, along with supply & installation of 2 nos. of 40mm dia HDPE pipe for cable entry and cable exit. 4 no. 'J' type foundation bolts M20 of 650mm Length shall be anchored in the foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site. |
| 2 | Supply and Erection of 8M Free standing Double arm bracket 8 sided octogonally continously tapered structured pole with base plate of size 300x300x12mm as per ID-875 with following specification.Bottom Pole Dia - 130MMTop Pole Dia - 70MMThickness of Pole - 3MMThe pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron |
| 3 | Supply and delivery of 120W LED Street light fitting with dimmable driver, 5PIN NEMA socket, alteast 300mm length of 3 core 1sq.mm copper cable and IP66 Male connector complete as per technical Specification mentioned in the tender document |
| 4 | Labour charges for fixing of 120W LED fittings for existing and new lights (including dismantling of old fixture if applicable) |
| 5 | Aluminium alloy solid found conductor with 8 mm dia of material aloys as per IEC 6256/2 with conductor holder er, glue, connectors joints etc., |
| 6 | Supply and Fixing of Two Pole -32A,10KA MCB 240V 50 Hz AC supply suitable for Lighting circuit. |
| 7 | Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 9 meters with IP 66 Female connector in one end suitable to connect with Male connector in the LED fittings as per technical specification mentioned in the tender document |
| 8 | Supply and Laying of 4x16Sq.mm sq.mm PVC armoured LTUG Cable and 40 mm HDPE pipe in a trench to be excavated at a depth of 0.75 Metre putting 0.15 Metre.Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 9 | Supply and Laying of 4x16Sq.mm sq.mm PVC armoured LTUG Cable . |
| 10 | Supply, fixing and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 11 | Supply, delivery and Installation of Three Phase – RF+4G gateway streetlight controller including installation accessories as per technical specification in the tender document |
| 12 | Earthing as per PWD standard with an earth electrode of 2 metre class \\"B\\" GI pipe of dia not less than 32mm complete with necessary massonry work.(SD 234) |
| 13 | Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No. 8 SWG GI wire at the equal interval of 1.5 metre |
| 14 | Supply and fixing of three phase service connection EB Meter box of size 24''x18\\"x9\\" with single compartment made up of 16SWG powder coated vermin proof metal sheet with clamps suitable for EB RCC pole suitable for three phase EB service connection. The meter box fixed with 12mm wooden board fixed with 3 number of 63 Amps porceline fuse unit Inter connection with 7/16 SWG PVC insulated copper wire with one number of neutral link. The meter box should be provided with glass in front side. fixing of The meter box should be made PWD earthing. The rate includes dismanling of existing meter box and fixing new meter box, EB energy meter and accessories and termination of wires. |
| 15 | Supply, delivery and Installation of Individual Lamp Monitoring devices as per technical specification in the tender document Please Enable Macros to View BoQ information |
