Tender For Tnpgcl- 2X660 Mw - Construction Of Permanent 7 Blocks R Type ,3 Blocks S Type ,2 Blocks T Type ,2 Blocks U Type Quarters For The Officers @ Ustpp-I -Udangudi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
16 days left
EMD
39 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Office of the Chief Engineer/Udangudi STPP-I → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tnpgcl- 2X660 Mw - Construction Of Permanent 7 Blocks R Type ,3 Blocks S Type ,2 Blocks T Type ,2 Blocks U Type Quarters For The Officers @ Ustpp-I -Udangudi.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Extension of time for tender opening | Date | 27-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearing Scrub and Light jungle and disposing off to a place at-least 1km away from the site as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete. |
| 2 | Setting up of piling/boring equipment with all accessories and tools & plants at each of the pile location based on the sequence of operation approved by the Engineer at site, irrespective of the location and distance of the boring equipment for 600mm dia piles including coast of all materials, labour, lead, lift, etc., completed. |
| 3 | Boring and concreting of vertical reinforcement concrete piles 600 mm dia upto required depth from ground level by Direct mud circulation method with bentonite powder slurry, concrete grade M 30 using 12-20 MM machine crushed metal using minimum cement content of 400 Kg/m3 and maximum water cement ration of 0.5 with the admixture of conplast SP 337 @ 300ml per bag of cement and charges for conducting integrity penetration test on single vertical working pile to a depth of 22.5m as per specification including cost of all materials, labours lead, lift etc. complete (but excluding cost of reinforcement) |
| 4 | Chipping and dismantling of weak concrete from GL to cut off level of pile concrete to meet sound concrete and clearing the dismantled concrete 1km from pile location, etc including cost of all labour charges, tools, lead, lift etc. completed. |
| 5 | Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in sand,silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth. as directed by the Engineer in charge including all Labour charges, Lead, Lift,Dewatering charges T&Ps etc., complete. |
| 6 | Providing anti- termite protection treatment (Pre-Construction) for the Foundation and flooring by drilling holes of 150mm depth at 300mm C/C and filling the holes with anti termite liquid and refilling the holes with earth compacted by plate compaction as per IS 6313(Part-II) including cost of all materials, Labour charges, Lead, Lift, T&Ps ,Charges for plate compaction etc., complete . |
| 7 | Refilling with excavated earth well -watered and consolidated in layers of not more than 150mm thick in foundation and basement as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete. |
| 8 | Supplying and filling stone dust well watered and consolidated in foundation and basement in layers complying with standard specification as directed by the Engineer in charge including cost of all materials,Water charges, all Labour charges, Lead, Lift, T&Ps etc., complete. |
| 9 | Supplying and filling with Gravel in layers for Basement well watered and compacted by plate compacter with standard specification as directed by the Engineer in charge including cost of all materials, Water charges,all Labour charges, Lead, Lift, T&Ps etc., complete. |
| 10 | Providing P.C.C. 1:4:8 using 40mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges,Water charges,dewatering charges, curing, T&P, leads, lifts etc., complete. |
| 11 | Centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering up to 3m high using M.S. sheets of size 90cm x 60 cm and B.G. 10 gauge, stiffened with welded M.S. Angles of size 25mm x 25mm x3mm laid over (Silver oak) country wood joints of size 10cm x 6.50 cm (Spaced 90 cm c/c) and supported by casuarinas props of 10 cm to 13cm dia Spaced at 75cm c/c) complying with standard specification and as directed by the Engineer in charge. |
| 12 | PILE CAP ,All Beam and slab |
| 13 | Column and Sun shade |
| 14 | Providing R.C.C. in Pile cap, Floor Beam in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 350kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of all materials, labour charges, vibrating charges, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement - 1M³ |
| 15 | For PILE CAP |
| 16 | for floor Beam |
| 17 | Providing R.C.C. Columns in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 350kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of all materials,water charges, labour charges, vibrating the concrete, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement - 1M³ |
| 18 | AboveGround Floor floor slab up to IFloor slab |
| 19 | Above Ist Floor slab up toII Roof slab |
| 20 | Above IIND Floor slab up Roof slab |
| 21 | Head Room |
| 22 | Providing R.C.C. Roof beams in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 350kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of all materials,water charges, labour charges, vibrating the concrete, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement - 1M³ |
| 23 | Above Ground Floor slab up to I Floor slab |
| 24 | Above Ist Floor slab up toII Roof slab |
| 25 | Above IIND Floor slab up Roof slab |
| 26 | Head Room |
| 27 | Providing RCC in Roof slab in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 350kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of all materials,water charges ,labour charges, vibrating the concrete, Concare,curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. |
| 28 | Ground Floor Roof slab |
| 29 | Ist Floor Roof slab |
| 30 | IIND Floor Roof slab |
| 31 | Head Room Roof slab |
| 32 | Providing RCC in Sunshade, Loft in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 350kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of all materials,water charges labour charges, vibrating the concrete, Concare,curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. |
| 33 | Ground Floor |
| 34 | Ist Floor |
| 35 | II ND Floor |
| 36 | Head Room |
| 37 | Providing R.C.C. M25 GRADE for Base slab and walls of water tank using 12mm to 20mm graded (HBG) hard machine broken granite metal with minimum cement content of 350kg/m3 and maximum water-cement ratio of 0.5 and using water proof admixture of approved make and quality as directed by the Engineer in charge including cost of all materials,water charges, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete as per specification but excluding cost of steel reinforcement |
| 38 | Supplying , cutting, bending, binding and placing in position of reinforcement rod at all level and elevation for High strength deformed TMT Bars having characteristic strength of Fe 500 N/mm² of ‘TATA’ or ‘SAIL’ make or equivalent in all RCC work including cost of all material, lead, lift and binding wire (18 G)etc., complete as directed by the Engineer at site. |
| 39 | Brick work in CM 1:5 using Fly ash Bricks of size 23x11x7cm with minimum compressive strength of 75kg/cm² for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, Lead, Lift, T&P etc., complete. |
| 40 | Ground Floor |
| 41 | Ist Floor |
| 42 | IIND Floor |
| 43 | Head Room |
| 44 | Brick work in CM 1:5 using chamber burnt Class II clay bricks of size 9”x 41/2”x3’’ with compressive strength of 50kg/cm² for partition walls, etc., as directed by the Engineer in charge including cost of providing 2 nos of 8mm dia MS/RTS rods at every 5th layer, cost of all materials, water charges,scaffolding, labour charges, curing, Lead, Lift, T&P etc., complete. |
| 45 | Ground Floor |
| 46 | First Floor |
| 47 | Second Floor |
| 48 | Providing Damp Proof course in Cement Mortar 1:5, 12mm thick using water proofing compound of approved make @2% by weight of cement finished with bitumen top as directed by the Engineer in charge including cost of scaffolding, all materials,water charges, Labour charges, curing, Lead, Lift etc complete. |
| 49 | Supplying and fixing chicken mesh 10mmx10mm of 20G over junction of Brick work with reinforced concrete columns, beams etc., Mesh shall have a minimum lap of 75mm on either side of the joint, and shall be fixed to brick work/concrete before plastering as directed by the Engineer in charge including cost of all materials, labour charges, curing, Lead, Lift, T&P etc., complete |
| 50 | Providing drops of 70mm thick with shot-creting in mix 1:1.5:3 using 6mm downgraded metal chips over chicken mesh of size 10mmx10mm of 20G as directed by the Engineer in charge including cost of all materials, Labour charges, curing, Lead, Lift, T&P etc., complete but excluding cost of reinforcement. - |
| 51 | Plastering in CM 1:3,10mm thick all ceiling surfaces, Sunshades, Lofts, bottom of waist slab etc., including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete |
| 52 | Plastering in CM 1:5, 12mm thick for interior surfaces of all walls including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete |
| 53 | Plastering in CM 1:5, 20mm thick in two layers (first Layer of 12mm thick and second layer 8mm thick) for exterior surfaces of all walls including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete |
| 54 | Providing floor finish with vitrified tiles of size 600x600x8mm of approved make, colour and pattern over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors as directed by the Enginer incharge at site including cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete. - 10M² |
| 55 | Providing floor finish with anti-skid tiles of approved make, colour and quality and of size 300x300x6mm over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors for Bath and Toilet cutting chase in walls wherever requiredas directed by the Enginer incharge at site including cost of all materials labour charges lead, lift, curing T&P etc., complete. |
| 56 | Dadooing the walls with Joint free ceramic tiles of approved make, colour, pattern, quality and size over 10mm thick CM 1:3 bedding and pointing with same coloured cement in all floors for Bath, toilet for a height of 2.10m and above kitchen platform as directed by the Engineer incharge at site including cutting chase in walls wherever required, finishing, cost of all materials, labour, lead, lift, curing etc., complete - 10M² |
| 57 | Skirting with vitrified ceramic tiles of approved make, colour, pattern, quality with 8mm thick over 10mm thick Cement mortar 1:3 bedding for required height and pointing with same coloured cement in all floors for cutting chase in walls wherever required as directed by the Enginer incharge at site including cost of all materials labour charges lead, lift, curing T&P and etc., complete. |
| 58 | Floor finishing in CM 1:3, 12mm thick for top of Steps and Parking area etc., including cost of all materials, labour charges, leads, lifts, water charges,curing, etc, complete. |
| 59 | Providing P.C.C. 1:3:6 using 12mm to 20mm graded HBG metal for flooring as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete. |
| 60 | Providing Granolithic floor finish in mix 1:1:2(one part of cement ,one part of sand & two part of chips) using chips of grade 6mm and below for portico floor as directed by the Engineer in charge including cost of all materials labour charges lead, lift, curing T&P etc., complete |
| 61 | Supplying and fixing Doors flush type (Single leaf) with Factory made shutters using 30mm Medium Density Fibre Board as per IS:3087 / 1985 with E-type T.W. beading bonded with Water resisting adhesive fixed to country wood frame of size 100 X 65mm and fully thread GI screws and as per IS 1003/1977 and with the following fixtures such as iron butt hinges, SS tower bolt, SS aldrop, SS wind stopper, SS handles,Mortice lock with night latch for doors and painting with two coats of approved enamel paint over a coat of primer including cost of all materials, labour, lead, lift, etc complete |
| 62 | Main Doors |
| 63 | For inner Doors |
| 64 | Providing and fixing in position Anodized Aluminum frame with powder coating glazed sliding window/UPVC window of required size as per specification and drawing as detailed below including cost for chipping the existing wall, finishing it after fixing the window in position, including cost of all materials including rubber beeding,aluminum beeding etc., labour charges, leads and lifts etc complete. i) Vertical Post - Anodized Aluminum section 63x38mm of thickness 2.45mm with country wood filled at maximum spacing of 600mm c/c. ii) Horizontals - Anodized Aluminum section 63x38mm of thickness 2.45mm with country wood filled at maximum spacing of 750mm c/c.iii) 5.5mm thick pin head Glass. iv) Aluminum cleat angle of weight not less than 0.12Kg/m on both sides of frame. |
| 65 | Providing and fixing in position Anodized Aluminum frame with powder coating glazed Fixed window/UPVC window of required size as per specification and drawing as detailed below including cost for chipping the existing wall, finishing it after fixing the window in position, including cost of all materials including rubber beeding,aluminum beeding etc., labour charges, leads and lifts etc complete. i) Vertical Post - Anodized Aluminum section 44.43x44.45mm of thickness 3mm. ii) Horizontals - Anodized Aluminum section 44.43x44.43mm of thickness 3mm. iii) 5.5mm thick pin head Glass. iv) Aluminum cleat angle of weight not less than 0.12Kg/m on both sides of frame. |
| 66 | Supplying and fixing partly panelled and partly glazed country wood Cup board of required size as directed by the Engineer in charge using factory made CW frame (75x32mm) and CW partly panelled and partly glazed shutters using 18mm thick MDI particle board both side laminated of ISI stamped and 5.5mm thick plain glass of good quality and providing 3 tiers of 20/30mm thick double side polished cuddappa slab and making the faces smooth by nosing for shelves including cost of all materials labour charges fixing charges, required fixtures and fittings to the cub board such as Mortice Lock - (Godrej (or) equivalent) with required screws with 3 Keys, tower bolt, Inner hooks etc., lead, lift and, 2 coats of solignum for portions and wood work in contact with masonry lead, lift etc., complete. |
| 67 | Supplying and fixing fully panelled country wood Cup board of required size in bed and kitchen in all floors as directed by the Engineer in charge using factory made CW frame (75x32mm) CW partly panelled shutters and using 18mm thick MDI particle board both side laminated per ISI stamped and providing 3 tiers of 20/30mm thick double side polished cuddappa slab and making the sides smooth by nosing for shelves including cost of all materials labour charges fixing charges, required fixtures and fittings to the cupboard such as Mortice Lock - (Godrej or equivalent) with required screws with 3 Keys, tower bolt inner hooks etc., lead, lift and, 2 coats of solignum for portions and wood work in contact with masonry lead, lift etc., complete. |
| 68 | Supplying & fixing Aluminum grills of approved design for windows using 20x12mm Aluminum flats and middle portion16mm grill including cost of all materials and labour charges for cutting, welding and fabrication charges, cost of consumable such as gas, electrodes screws, fixing and transporting, lead, lift, etc. complete |
| 69 | Fabrication, Supplying and fixing of stainless steel Hand Rail approved design, Top 50mm and middle & bottom 40mm Rail , Vertical 50mm at 1000mmc/c , intermediate ss rail 25mm at 250mm C/C for required shape and height 900mm as directed by the Engineer at site including cutting and welding and fabrication charges, cost of consumable such as gas, electrodes all screws and all labour charges,lead, lift etc., complete. |
| 70 | Supplying & fixing M.S. grills of approved design for sitout using 16mm sq. bar and 20x12mm MS flats including cost of all materials and labour charges for cutting, welding and fabrication charges, cost of consumable such as welding machine, welding rods, fixing, lead, lift, etc. complete |
| 71 | Supplying and fixing of Laminated PVC single leaf door SINTEX / STAR SUPREME make or equivalent of approved colour, Pattern and quality with shutter and PVC frame of required size and type with minimum 5mm thick PVC sheet as directed by the engineer at site with 3 Nos 100mm Aluminium butt hinges, 2 Nos 150mm anodized Aluminium handles, 2 Nos Anodised Alumium 200x12mm tower bolt and 1 Nos. 200mm Aldrop etc., for Bath and toilet including cost of transporting, lifting and fixing, cost of all materials, labour charges including fixing, lead, lift etc., complete. |
| 72 | Supplying and fixing of Aluminum anodized Louvered ventilator/UPVC Ventilators of required size, the outer frame in Aluminum Box section 62x38x4mm, the louvers with moving arrangements in Alu channel of size 60x30mm with necessary pinhead glass pans of 4mm thick Louvers, Al. clips including chipping, dismantling/making holes in masonry/Concrete wherever necessary and make good the disturbed area to the original condition after fixing, cost of all materials labour charges, lead, lift, fixing charges, Transport T&P etc., complete . |
| 73 | Supplying and fixing Granite super fine polished slab of 20mm thick approved colour over 12mm thick Cement mortar 1:3 bedding (Flooring), pointing with same coloured cement in Kitchen Cooking platform and making the sides smooth by nosing as directed by the engineer at site including cost of materials, labour, finishing to the same level, lead, lift and curing etc., complete. |
| 74 | Supplying and laying of cuddappa slab 25mm thick Double side polished and making the sides smooth by nosing as directed by the Engineer incharge with CM 1:3 20mm thick making chase in walls, finishing to the original condition including cost of all materials labour, lead, lift, curing etc., complete. |
| 75 | Supplying and providing 1 No cuddappa sink polished of size 600 x 600 x 300 mm adjacent to kitchen platform and making the sides smooth by nosing including cost of materials such as 32mm dia C.P. waste couplingas directed by Engineer incharge at site, labour, making chase in walls finishing to the original condition, lead, lift and curing etc., complete. |
| 76 | Supplying and fixing 1 No concrete ring of dia 230mm and 250mm length for fixing the exhaust fan in the wall inluding cost of all materials, dismantling brick wall to required size, labour charges, leads, lifts, and curing, etc., complete. |
| 77 | Supplying and fixing Granite super fine polished Corner slab of 30cm of size in the bath rooms, toilet wall corner and making the sides smooth by nosing as directed by the engineer at site including cost of materials, labour, making chase in walls for fixing, finishing to the original condition, lead, lift and curing etc., complete. |
| 78 | Supplying and fixing Indian water closet of size 530x410mm Parry Ware make or Equivalent of approved quality and colour with ‘P’ or ‘S’ trap conforming to IS 2556-Part XII with packing the joints of the closet with the traps with asbestos rope using cement mixed with approved water proof compound, laying the closet over sand cushion and forming flooring around the closet using 40mm broken jelly in lime concrete 1:2:5 (One part of Lime, two part of sand and five part of brick jelly) of 100mm thick and finishing the top to required slope, connecting to soil pipes by dismantling the brick masonry/RCC slab making good the disturbed portion to original condition and finished water tight without leakage complying with standard specification as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, , T&P etc., complete. |
| 79 | Supplying and fixing approved make coloured glazed Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron brackets, 32mm dia C.P.waste coupling, rubber plug and chain, 32mm dia 'B' Class G.I. waste pipe, 15mm dia G.M. wheel valve, 15mm dia nylon connection, 15mm dia brass nipples,15mm C.P. pillar tap etc.cost of all materials, transporting, labour, lead, lift, etc., complete. |
| 80 | White washing with two coats of white cement for ceiling surfaces including cost of all materials, scaffolding,water charges, Labour, Lead, Lift etc., complete. |
| 81 | Colour washing Inside building with two coats of Acrylic Emulsion (First quality - Apex or its equivalent) over a coat of water based primer with applying two coats of Wall Putty paste of approved quality over the priming coat one coat by one coat and making the interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, water charges,Labour, Lead, Lift etc., complete. |
| 82 | Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding,water charges, Labour, Lead, Lift etc., complete. |
| 83 | Providing one course of best pressed tiles of size 230x230x20mm as weathering course for roof slab embedded in 12mm thick Cement mortar 1:3 mixed with crude oil @ 10% by weight of cement over a bed of brick jelly in pure slacked lime in the ratio of 32:12.5 (32 parts of Brick jelly to 12.5 part of lime) to an average thickness of 80mm laid with required slope well beaten with wooden mallet and pointed with the same oiled mortar including cost of all materials, Labour, Lead, Lift etc., complete |
| 84 | Supply and laying of 110mm(4KG/M2) dia PVC pipe of FINOLEX or equivalent approved make and quality with ISI monogram as directed by the Engineer in charge for Downfall Pipes as directed by the Engineer in charge including cost of all materials, all specials such as Tees, Elbow, shoes, Special clamps, bends and screws, gratings etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, Labour, scaffolding, Lead, Lift etc., complete. |
| 85 | Supplying and fixing in position of various dia PVC sewer pipe line of FINOLEX make or equivalent of approved make and quality with ISI monogram as directed by the Engineer in charge for sewer pipes including cost of all materials, all specials such as Tees, Elbow, shoes, Special clamps, bends and screws, gratings, wooden plugs etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, Labour, scaffolding, Lead, Lift etc., complete . |
| 86 | PVC pipe 110mm dia (6kg/cm²) |
| 87 | PVC pipe 90mm dia (6kg/cm²) |
| 88 | PVC pipe 50mm dia (6kg/cm²) |
| 89 | Supplying & fixing in position of water supply PVC heavy duty pipes (10 kg/c m²) Finolex or equivalent with ISI monogram with necessary specials and fittings for water supply including cost of all materials, labour, lead, lift, etc. complete. |
| 90 | 50mm diaPVC pipe (10 kg/cm2) |
| 91 | 32mm diaPVC pipe |
| 92 | 25mm dia PVC pipe |
| 93 | 20mm dia PVC pipe |
| 94 | 15mm dia PVC pipe |
| 95 | Supplying and fixing Gun Metal Gate valve of ISI make of various dia (Heavy duty) as approved by the Engineer in charge including cost of all materials labour charges for fixing etc., lead, lift etc., complete. |
| 96 | Gun Metal Gate valve32mm Dia Heavy duty |
| 97 | Gun Metal Gate valve 25mm Dia Heavy duty |
| 98 | Gun Metal Gate valve 20mm Dia Heavy duty |
| 99 | Supplying and fixing of 15mm dia CP coated bib cock (Heavy Duty) (Parryware/Plato or its equivalent) with CP cup and Inner running Nipple of ISI make as directed by the Engineer in charge including cost of all materials, labour charges for fixing, lead, lift etc., complete. |
| 100 | Supplying and fixing PVC Nahini trap / Multi trap of size 75mmx50mm with stainless steel grating of approved brand and quality fixed over a bed of brick jelly lime concrete including dismantling masonry works and making good the damaged portions to the original condition with finishing in cement mortar including cost of all materials, labour charges, curing, all lead, lift etc., complete. |
| 101 | Supplying and fixing of best quality Brass chromium plated towel rail 60cm long and 20mm dia with brackets in the bath room in all floors including cost of all materials, labour for fixing, lead, lift with necessary teak wooed plug, CP screws and dismantling masonry and red oxide the same to original condition etc., complete. |
| 102 | Supplying and fixing in position of Brass CP shower of 100mm dia with 20mm dia CP Consealed gate valve with CP cup in bath rooms as directed by the Engineer in charge including cutting, threading, jointing etc., complying with standard specifications, cost of all materials, labour charges for fixing, all lead, lift etc., complete. |
| 103 | Painting the steel work with two coats of approved quality colour Satin / Matt finish enamel paint over a coat of primer of red oxide including cost of all materials, brushes, lead, lift etc., complete. |
| 104 | Painting to the wood work with two coats of approved quality colour Satin / Matt enamel paint over one coat of approved wood primer including cost of all materials, brushes, lead, lift etc., complete. |
| 105 | Providing plinth protection alround the building for a width of 1m from the face of the basement wall by laying PCC 1:3:6 using 20mm HBG metal for an average thickness of 100mm and Flooring over with CM 1:3 and the finished surface is to have a slope away from the plinth to drain water from down fall pipes with slope towards rain water harvesting structure as directed by the Engineer in charge including cost of all materials, labour charges, curing, lead, lift etc., complete. |
| 106 | Providing open brick masonry drain of inner width 200mm and average height 200mm around plinth protection using fly ash brick masonry, both side 230mm thick in CM 1:4 and plastered inside and outside and top, with CM 1:3, 12mm thick over 75mm thick PCC 1:4:8 using 40mm HBG metal and to suit the gradient of the drain as directed by the Engineer in site including cost of Earth work,PCC,brick work,Plastering all materials, labour charges, curing charges, lead, lift etc., complete. |
| 107 | Providing inspection chamber (Manhole)of size 450 x 450mm internal size for an average depth of 600mm (150mm above G.L.) in brick masonry 230mm thick in CM 1:4 using fly ash bricks over 100mm thick PCC 1:4:8 using 40mm HBG metal for foundation and plastered with CM 1:3, 12mm thick both inside and outside the manhole and fixing GI Manhole cover of size 450 x 450 mm (Heavy Duty) with alround frame benching inside the chamber including cost of Earth work,PCC,brick work,Plastering all materials, lead, lift, curing, back filling etc., complete. |
| 108 | Supplying and providing Rain water harvesting arrangement by providing perculation pit of size1.20 x 1.20 x 1.20M height including 1.20m depth of earthwork excavation , 900mm depth filling with 40mm metal , 230mm depth sand filling , alround brick work 230mm thick, 450mm height in CM 1:4 using fly ash bricks over PCC 1:4:8,100 thick as directed by the engineer at site. including cost of all materials, Earth work,PCC,brick work,Plastering, labour charges, lead, lift, curing and back filling etc., complete. |
| 109 | Providing projected border of 10 cm width on top of parapet wall for good elevation in CM 1:3 12mm thick including cost all materials lead lift curing etc complete. |
| 110 | Supply and fixing in position of PVC Water Tank (One tank capacity 500 litre) in and out let arrangement ,Sintex or equivalent approved make as directed by the engineer at site including cost of all materiles, lead,lift, transportion, etc., complete |
| 111 | Transporting the surplus excavated earth with a lead of 1km over the initial lead of 10m and lift of 2m , depositing and spreading as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete. |
| 112 | Supply and fixing of horizontal type 4 Way Triple Pole neutral MCB Distribution board in sheet steel enclosure with 40A FP Isolator (MCB), 40A FP ELCB 30MA as incoming and 12 Nos. 6A - 32A single pole MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB, ELCB and MCBs should be with ISI mark (Legrand (MDS) / Hager (L&T) make or Equivalent) including cost of all materials such as cables, pipes, etc, complete – 1 |
| 113 | Supply and fixing of Meter Board (with out meter) and 32A MCB (500V) Three phase service connection all internal wiring with 6Nos.Service Connection panel size 1200mmx1750mm and common area(staircase,Stilt floor) with 1No.Service Connection panel size 350x350mm separately with powder colour coated sheet .MCB box(minimum 300mm x 300mm) , meter box (minimum 450mmx300mm) with suitable frame work including two coats Painting (angle size 38 x 38 x 6mm) and internal connection with earth link (25x3mm Copper flat)as directed by the Engineer at site including cost of all materials, all labour,fixing and transportation charges, fabrication and welding charges, lead, lift etc, complete., |
| 114 | Supply and fixing of 100 Amps DPIC switch with fuse and neutral on suitable powder colour coated Trunking Box with earth connection Main cable entry way and all wiring and connection including cost of all materials etc complette., |
| 115 | Earthing as per PWD standard with an earth electrode of 2M class B GI pipe of dia not less than 32mm complete with neceesary masonry work including cost of all materials, labour, lead, lift etc, complete. |
| 116 | Wiring with 3X2.5sqmm PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling for light points with PVC accessories in flush with wall with 3mm thick hylum sheet cover for Metal box with paint and 5A F.T. switch (2 way) with continuous earthing for providing 2.5 Sq.mm multistand and making good of the concealed portion with suitable colour for concealed PVC stair case light point with 5amps F.T. switch, ceiling rose, etc. complete for head room light point including cost of all materials, cables, pipes, etc. complete. |
| 117 | Wiring with 3X2.5sqmm PVC insulated unsheathed copper conductor cable of 1100V in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150X100X13mm with Metal box with paint ,3mm thick hylum sheet cover for 5A 3 pin non interlocking flush type CS plug with continuous earth wire connection by 2.5 Sq.mm multistand wire and making good of the concealed portion with suitable colour for concealed PVC plug point including cost of all materials such as cables, pipe etc complete. |
| 118 | Wiring with 3X4sqmm PVCC insulated unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150X100X113mm Metal box with paint 3mm thick hylum sheet cover for 15 A 3 pin non interlocking flush type CS plug with continuous earth wire connection of 4 Sq.mm multistand wire and making good of the concealed portion with suitable colour for concealed PVC plug point including cost of all materials such as cables, pipes, etc. complete. |
| 119 | Supplying and run of 4 of 6 Sqmm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earthing for providing 6 Sq.mm multistand PVC wireand making good of the concealed portion with suitable colour including cost of all materials such as cables, pipes, etc, complete. |
| 120 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton Greaves/Equivalent)) suitable for LED lamp with 9W bulb including cost of all materials such as cables, pipes, etc, complete. |
| 121 | Supply and fixing of 9W LED Lamp for BH point including cost of all materials such as cables, pipes, etc, complete. |
| 122 | Supply and fixing of single box type 4'x19W LED flu fitting complete with copper choke and condensor (Philips / Crompton / Wipro/Equivalent) with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the including cost of all materials such as cables, pipes, etc, complete. |
| 123 | Supply and fixing of 1200mm (48’) AC ceiling fan confirming to ISS 374 /1979 (Bajaj / Crompton / Usha/Equivalent) complete with stepped electronic square type regulator with 300mm down rod on the existing clamp including cost of all materials such as cables, pipes, etc, complete. |
| 124 | Supply & fixing of AC/DC 76mm Buzzer/call bell suitable for 230 volts 50 C/S single phase AC supply on suitable TW Board with push switch including cost of all materials such as cables, pipes, etc, complete. |
| 125 | Supply and fixing 300mm (12”) sweep (light duty) confirming to IS (Bajaj / Crompton / Almonad) AC Exhaust fan complete with necessary wall opening and making good of the wall including cost of all materials such as cables, pipes, etc, complete. |
| 126 | GST (As per Govt Norms) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 daysJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender