|
| 1 | Supplying and fixing of 20 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 2 | Supplying and fixing of 25 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 3 | Supplying and drawing 3 numbers 1.5 sq mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in existing surface / recessed PVC conduit as required. |
| 4 | Supplying and drawing 3 numbers 2.5 sq mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in existing surface / recessed PVC conduit as required. |
| 5 | Supplying and drawing 3 numbers 6 sq mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in existing surface / recessed PVC conduit as required. |
| 6 | Supplying and fixing 15/16 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 7 | Supplying and fixing 6 pin 15/16 A modular socket (3 module) outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 8 | Supplying and fixing 4 Module, GI/ PVC open box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 9 | Supplying and fixing 6 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 10 | Supplying and fixing 25A rating, 240 V, 'C' curve miniature circuit breaker suitable for inductive load of double pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 11 | Supplying and fixing 25 A rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and fixing 4 way ( 8+12 ), Vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . |
| 13 | Supplying and fixing 6 - 32 A rating, 240/415 V, 'C' curve miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 14 | Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 15 | Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole and neutal in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 16 | Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 17 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 18 | Supply of 1.1 kV grade 3.5C x 35 sq.mm, Aluminium conductor XLPE insulated PVC sheathed armoured power cable as required. |
| 19 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5C x 35 sq.mm on wall surface as required.(clamped with 1 mm saddle) |
| 20 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 35 in the existing DWC HDPE pipe as required. |
| 21 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 22 | Supply and making end termination with brass compression gland and aluminium legs for 3.5C x 35 sq.mm (32 mm) size of XLPE insulated PVC sheathed armoured aluminium cable as required.spacing not exeed 50 cm etc. as required. |
| 23 | Supply and Laying of one number 8 SWG good quality bare copper conductor for loop earthing along with existing XLPE insulated PVC sheathed armoured power cable as required. |
| 24 | Supply and providing GI pipe earthing with 2.5 m long 40 mm GI pipe, drilling of 20 nos 12 mm dia holes on GI pipe, providing masonry enclosure with CI/MS cover plate hinged to frame having locking arrangement, providing funnel, with all materials and labour etc. as required. |
| 25 | Supply and providing \\"Excel\\" Earthing Compound including mixing with excavated fine soil and water to make it as slurry and filling around the earth plate etc. as required. |
| 26 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 27 | Supply and laying of 3 inch 80 NB GI pipe (medium class B) on ground and fixing the GI pipe using concrete etc as required |
| 28 | Supplying of one number 3Cx 2.5 sq mm copper condutor armoured PVC sheathed power cable of 1.1 kV grade etc. as required. |
| 29 | Laying of one number PVC insulated Copper conductor armoured power cable of 1.1 KV grade of 3C x 2.5 in the existing DWC HDPE pipe as required. |
| 30 | Supplying and laying of 40 mm dia (OD-40 mm & ID-32 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 31 | Supplying and making end termination with brass compression gland and copper lugs for 3C × 2.5 sq.mm PVC insulated & PVC sheathed copper conductor cable, 1.1 kV grade as required |
| 32 | Supplying and laying of 3 core × 2.5 sq.mm ISI marked PVC sheathed flat submersible cable with bare bunched copper conductor, suitable for working voltage up to and including 1.1 kV, including supply and wrapping with waterproof insulating tape, laying, testing and commissioning complete as required. |
| 33 | Charges for concreting with 20 x 20 x 60 cm up to ground level and 20 cm above ground level using 8 mm steel reinforcement as per drawing with cement concrete of 1:2:4, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required. |
| 34 | Charges for concreting with 20 x 20 x 20 cm up to ground level and 10 cm above ground level using 8 mm steel reinforcement as per drawing with cement concrete of 1:2:4, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required. |
| 35 | Design, supply, installation, testing and commissioning of 3 - 4 m high decorative pole, made of hot-dip galvanised steel tube Ø76 mm × 3.2 mm thick (Class ‘A’), black PU painted, with gold colour painted decorative cast aluminium rings, complete with welded base plate Ø140 mm × 5 mm thick (Class ‘B’) having 4 mounting holes, including 4 Nos. foundation bolts 16 mm dia × 450 mm long with 200 mm PCD, manufactured from special steel, complete with SS nuts, washers, anchor plate and common template. Pole shall be suitable for 3.0 m height and provided with integral connector block for loop-in / loop-out flushed in bottom portion of pole, including supply and termination of 3C × 2.5 sq.mm flexible copper cable and 6–32 A SP C-curve MCB, complete with all wiring, connections, accessories, testing and commissioning, etc., as required. Approved make: Bajaj BJPL-01-300 ECO / Kesslec 3 m ECO-70/90 spigot or equivalent. |
| 36 | supplying, installation, testing and commissioning of LED Post Top Luminaire including proper supporting provision /arrangement to fix luminaire to the GI post if necessary,power consumption not exceeding 40 Watt, suitable for mounting on existing pole/post, complete with all accessories and internal wiring, as required at site. The luminaire shall be post-top type with die-cast aluminium housing (grey finish) and frosted white polycarbonate/PMMA diffuser, fitted with high efficiency LEDs having CRI > 80, CCT 3000 K / 4000 K / 5700 K, and minimum luminous efficacy of 80 lumens per watt at 5700 K, complete with inbuilt electronic LED driver. The luminaire shall be compatible with the existing pole and installed without causing any damage to the pole or mounting arrangement. Approved Make: Philips BGP300 LED28 757 PSU PC IN S1–/ Equivalent approved make. |
| 37 | Supply, installation, testing, and commissioning of a 10-15W Disc LED Bollard luminaire with a rated input wattage of 15 W ± 10%, operating at 220–240 V AC, 50 Hz, with a luminous flux of 750 lm and luminaire efficacy of 50 lm/W as per BIS standards. The luminaire shall have a correlated color temperature (CCT) of 3000 K ± tolerance per ANSI, color rendering index (CRI) greater than 80 Ra, and an asymmetric beam angle. It shall be constructed from die-cast aluminium housing with matt grey powder coating, fitted with an opal white polycarbonate diffuser and polycarbonate reflector. The LED driver efficiency shall be ≥85%, with a rated LED lifespan exceeding 50,000 hours at L70. Protection features include overvoltage withstand up to 360 VAC for 2 hours, 2.5 KV surge protection, IP65 ingress protection, IK07 impact rating, and short circuit, open circuit, and reverse polarity protections.make Jaquar Model No. LBLDCYL010XW/philips/equivalent |
| 38 | Supply, installation, testing, and commissioning of a 3W LED Step light luminaire with a rated input wattage of 3 W ± 10%, operating at 220–240 V AC, 50 Hz, IP65 ingress protection, IK07 impact rating, and short circuit, open circuit, and reverse polarity protections.make Jaquar Model No. OWA-WHT-LFTL01S003XW /philips/equivalent |
| 39 | Supply and fixing of Digital timing switch,110 - 240 VAC, LCD display, Programmable DST, 16A (For 'NO') & 5A (For 'NC') @ 240 VAC / 24 VDC (Resistive), Inductive (cos ø = 0.6):- 6 A @ 250 VAC Contact rated (Legrand, L&T or equvalent) .Including necessory arrangements for fixing on exixsting DIN rail etc. as required. |
| 40 | Supply and fixing of 2 pole contactor, 110V-240V, 10A-25A range, MNX type (Legrand, L&T or equvalent) .Including necessory arrangements for fixing on exixsting DIN rail etc. as required.(Model MNX-25) |
| 41 | Fabrication, supplying and fixing of outdoor, cubical type water proof box with rain cap at the top, made out of 2mm thick M.S sheet, powder coated in suitable colour over a coat of primer with provision for fixing 5 nos 2pole Timer and 5 nos 2 pole contactor with din rail and sufficient clearance detachable gland plate at bottom, having single door with lockable knob, providing danger notice board on the front door, fixing using suitable size 'C' channel, including all minor civil works etc, as required. |
| 42 | Supply, installation, testing, and commissioning of a 6 W LED UP and Down luminaire with a rated input wattage of 6 W ± 10%, operating at 220–240 V AC, 50 Hz, IP54 ingress protection, IK08 impact rating, and short circuit, open circuit, and reverse polarity protections.make Jaquar Model No. LWWL03X203XW , philips/equivalent |
| 43 | Supplying and fixing of weather proof outdoor junction box for outdoor installation of size 130mm x 180mm x 77mm with knockouts for cable entry including dinbar, suitable connectors for connecting Cu/Al cable to copper cable of suitable size, provision for fixing two number of double pole MCB, weather proof gourmets,glands,clamps,screws of required length fastners connections for surface/ recess fixing on existing concerte base etc. as required(clip type)Hensel IP 69 DK 1010G made or Equivalent. Please Enable Macros to View BoQ information |
