|
| 1 | Description of Works |
| 2 | Provision for removing the accumulated debris and exposing the hidden structure very carefully to avoid damage, sorting of antiquities, sculptures etc., if found, and disposal of rubbish to a lead of 1000 mtrs by vehicle including loading and unloading lorry as per instructions of head office etc. Complete as directed by site incharge. |
| 3 | Earthwork excavation in hard soil including removal of excavated materials and disposing the same up to a distance of 50 mtrs. including initial lead and lift etc. Complete as directed by site incharge. |
| 4 | Provision for providing and laying rubble soling 0.15 m thick including ramming consolidating etc. complete as directed by site incharge. |
| 5 | Providing and laying cement concrete 1:3:6 proportion using by 20mm size hard stone metal including mixing laying and curing the concrete etc. Complete as directed by site incharge. |
| 6 | Provision for construction of UCR masonry in cement mortar 1:4 including cost of all material and labour charges, curing etc. Complete as directed by site incharge. |
| 7 | Providing and fixing M.S grill fencing in between 'the steel post of size 100x100x5mm hollow section of 1.90m. height'(0.30 m. emdeded in concrete) using 16 mm square bars( 22nos )to a height of 1.50 meters. fabricated by MS 'L' angle of size 50 x 50 x 6 mm for frame and supported with horizontal of M.S. flat of size50 x 6 mm two nos as per the sketch enclosed including applying two coat of smoke grey colour enamel paint after aaplying a coat of iron primer etc. Complete as directed by site incharge. |
| 8 | Providing brickwork with modular brick in super structure above plinth level in cement mortar 1:4 with necessary scaffolding curing etc. Complete as directed by site incharge. |
| 9 | Providing and laying stone flooring with dressed basalt stone of size 0.45x0.30x0.10m thickness stone obtained from approved quarry including loading unloading conveyance and fixing in position over the bed of 50mm thick in cement mortar 1:4 etc. Complete as directed by site incharge. |
| 10 | Providing and laying two line dressed basalt stone steps of size (0.45x0.30x 0.15 to 0.20) stones obtained from approved quarry including loading, unloading, conveying and fixing in position over a bed 40 mm thick in cement mortar 1:4 etc. Complete as directed by site incharge. |
| 11 | Provision for fixing of false ceiling 20 mm x 25 mm alluminum section with gyprex design sheet including fixing and all labour charges etc. Complete as directed by site incharge. |
| 12 | Providing 20 mm plaster in C.M. 1:3 to internal faces of wall in one coat including curing, scaffolding as directed etc. Complete as directed by site incharge. |
| 13 | Providing & applying 3 mm thick White finish Plaster Durowhite rendering on internal concrete & brick wall surface etc. Complete as directed by site incharge. |
| 14 | Providing and applying priming coat on concrete/ masonry/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. Complete as directed by site incharge. |
| 15 | Providing and applying Royale Luxury Emulsion of approved make on the wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.) etc. Complete as directed by site incharge. |
| 16 | Providing and applying two coats Apex UltimaPuranature Anti-Pollution Or equivalent approved brand ,paint should decomposes organic substance sand inorganic gases (NOx, VOC?s ,CO, SOx, form aldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide .and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal /Textured Crack filler, Paint has to applied on one coat of Apex UltimaPuranature Anti-Pollution Primer or Equivalent .Warranty Should be given by the Manufacturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. etc. Complete as directed by site incharge. |
| 17 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handle etc. Complete as directed by site incharge. |
| 18 | Providing and fixing ACP sheet for the toilet door in 25 mm x 75 mm Zindal Alumminum Section Colour anadiezed white 4 mm ACP sheet clear rubers S. S hinges and with fitting accessaries etc. Complete as directed by site incharge. |
| 19 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre.and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box etc. Complete as directed by site incharge. |
| 20 | Providing and laying Kota Stone Calibrated polish Flooring Tiles, Size 600x600 mm (2'x2'), in approved shade and pattern, for Hall and Bedroom floor area, fixed over a bed of cement mortar and using tile adhesive, jointed with matching grouting material, including cutting, laying, curing, edge finishing, cleaning etc., complete as per site in-charge instructions. |
| 21 | Providing First class teak wood planks for roof 20 mm under Mangalore tiles including fixing in position as per drawing etc. Complete as directed by site incharge. |
| 22 | Provision for providing Mangalore tiled roof with Mangalore tiles of size 0.42x0.25m. etc. Complete as directed by site incharge. |
| 23 | Providing and fixing aluminium sheet of minimum 0.63 mm thickness below Mangalore tiles as a waterproofing and protective underlayer over existing / new roof framework. etc. Complete as directed by site incharge. |
| 24 | GST 18% of SL.No.1 to 22 Please Enable Macros to View BoQ information |
