|
| 1 | Civil Part |
| 2 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 3 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood (THICKNESS 30MM) |
| 4 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.1 Second class teak wood |
| 5 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 6 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. M.S FLAT (50mmx50mmx3mm)& 10mm square bar (@20 KG/SQM) |
| 7 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: 13.57.3 Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 8 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 10 | Providing and fixing P.V.C low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 18.19.1 10 liter capacity -White |
| 11 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 12 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 13 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 19.65.1 15 mm nominal bore with 30 cm length. |
| 14 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 15 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 16 | Engaging Skilled Carpenter for repair of Wardroobs, door,window etc. inld. C/o nails etc. material required |
| 17 | Providing and fixing of water gyser of specified quality of Recold, venus, Bajaj or equalant quality & with a capacity of 50 liters |
| 18 | Engaging of skilled labours for cleaning of tiles, marble & kota suface with neat clean finish & wardroods etc. |
| 19 | Civil Part |
| 20 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/Fenolex/Anchor/eq. standard make as desired by engineer incharge) single core cable In surface / recessed medlum class PVC conduit, with modular switchLegrand Mylinc /SSK NV/schneider Livia /ABB Tvlsha make.), modularplate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable etc. as required. |
| 21 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wireFRLS PVC Insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable insurface/recessed medium class PVC conduit. |
| 22 | Supplying and fixing suitable size GI box with modular plate and cover infront on surface or in recess, including providing and fixing 6 pin 5/6 &15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable GI box, connections etc. as required. Modular Switch & Socket:-Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.) |
| 23 | Wiring for lighting circuits/ 6-10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mmFRLS PVC insulated copper conductor single core cable for loop earthing asrequired |
| 24 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSKNV/schneider Livia /ABB Tvisha make.) |
| 25 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.), single core cable in surface/recessed medium class PVC conduit as required.(f) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 26 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recessincluding cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint, complete |
| 27 | Supply installation testing and commissioning of 15 W+ LED Surface/recess, square or round Mounted light luminary fitting shape withminimum system lumen efficacy of 100 Im/W with Pressure Die castAluminium Heat Sink and P.F.>0.95,THD<10% ,ССТ 5700К, CRI 80.The LEDwith Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150Vto 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India. The job includes AMC (reckonedfrom date of successful commissioning) of lighting fixtures for a period ofTwo years which includes replacement of fixtures of Philips/ Trulux /Wipro/ Eq. standard make as directed by the engineer incharge. |
| 28 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton/equivalent make as directed byengineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 29 | Supply installation testing and comm. Of 1200mm CEILING fan of havell /Bajaj/Crompton/equivalent make as directed byengineer incharge, including making of space in wall/ window as per site requirement and necessary connections. Please Enable Macros to View BoQ information |
