|
| 1 | Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface Complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over and including one coat of red oxide Complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for preparation of new or previously untreated steel Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and applying a coat of black bituminous paint complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 9 | M&L for 50mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base. Complete all as specified and directed |
| 10 | Demolition of cement concrete(unreinforced) of any description andin any position not otherwise specifically provided for, complete all as specified and directed. |
| 11 | Supply only chain link MS galvanized fencing any size or type omplete all as specified and directed. |
| 12 | Fixing only chain link fencing including line wires any mesh size and type of standards , rails, straining bolts etc Complete all as specified and directed. |
| 13 | S&F MS round bar 10 mm dia and above cut to length bend to shape required including cranking bending separately spirally for hopping for col hooking ends and binding with mild steel wire not less than 0.9 mm dia or securing with clip qly confirming to IS complete all as specified and directed. |
| 14 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Complete all as specified and directed |
| 15 | S&F PU coated Cequered cement concrete tiles with PU coating grey cement and pigment 30cm X30cm X22-25mm thick set jointed and pointed in neat cement slurry in floors and including 75mm thick cement concrete type D-2 1:4:8 and incl 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 16 | M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris outside MOD land. Complete all as specified and directed |
| 18 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth using extra cement with 1:3 admixed with appropriate integral water proofing compound complete all as specified and directed.(Note : Supply only WPC shall be measured and paid separately) |
| 20 | Supply only Integral waterproofing compound (ISI marked) Complete all as specified and directed |
| 21 | M&L for two coats of cement base paint over and incl priming plastered and other surfaces with a coat of alkali resistant priming paint and incl preparation of wall surfaces newly plastered, complete all as specified and directed. |
| 22 | Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt Complete all as specified and directed |
| 23 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 24 | M & L for Cutting wild grass, bushes, creaper, unwanted vegetation from inside/ surrounding of E/M installations, near sweage pump installations,MRS,PUMP HOUSE as when directed and removing of unwanted material from installation compound and depositing where directed. |
| 25 | M & L for painting Sewage pump installation bldg (inside and outside ) at HQ DGBR , CVD LINE with two coat of distemper paint after scrapping out old paints from wall/ceilings etc and prepare smooth surface with white putty complete all as specified and directed. |
| 26 | M&L in repair copper cable flexible pvc armoured 3 core PVC insulated of size 2.5sqmm as specified and directed by Engr-in-Charge. |
| 27 | M&L for dewatering, desludging and cleaning of wet and dry sewage sump well at HQ DGBR up to bottom of sump by suction sweeper cum jetting machine method and Taking out sludge from the sump and dump it to the suitable place away from the any defence land complete all as specified and directed. |
| 28 | M&L for taking down of burnt motor winding of induction motor and complete rewinding of electric motor 10 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete. |
| 29 | M&L in repair for taking down of burnt winding of induction motor and complete rewinding of electric motor 12.5 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete. |
| 30 | M&L for taking down of burnt winding of induction motor and complete rewinding of electric motor 5 HP capacity with appropriate size of enamelled copper winding wire as recommended by manufacturer including insulation varnish and paper all as directed by engr-in charge and testing complete. |
| 31 | S&F in repair fully automatic star delta starter suitable for motor of capacity 12.5 HP including contactors and wiring with suitable size of copper wire.complete all as specified and directed. |
| 32 | Supply and fix in replacement junction box made from SMC/FRP sheet ready made of size having 100 A capacity for RYB and neutral with aluminium bus bar including all necessary insulators,nut bolts, screw fix to street light pole,joint the incoming and outgoing cable with suitable no of aluminium lugs fixed to Pole /Wall with the help of suitable nuts and bolts. Complete all as specified and directed. |
| 33 | Taking down unservicable RCC/ steel tubular poles of any type and supply & installing steel tubular swan neck pole type 410 SP-31 (9 mtr long) complete with mild steel base plate, finial taper plug, bolts, nuts and screws including two coats of aluminium painting over a coat of primer for exposed surfaces and two coats of bituminous black paint over a coat of primer to the surfaces in contact with concrete inclusing two runs of PVC insulated 1100V multi-stranded copper wire of size 2.5 Sqmm from the junction box to the fitting complete all as specified and directed.Note :- The unit rate in this item is deemed to be included the cost oif exacavation and earth work in any type of soil,PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole and GI bracket made of GI pipe medium grade 40 mm bore, 1.5 mtr long for fixing of street light fitings . The steel pole shall be painted by bituminious paint total lenth inside and up to planting depth outside. |
| 34 | Supply and fixing in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Please Enable Macros to View BoQ information |
