|
| 1 | Charpoy GI pipe (FD-220)S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed.(a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.(Make : Jindal/Bansal/Tata) |
| 2 | (b) 3 way 32 mm dia GI elbow ISI mark |
| 3 | (c) Check nuts of 32 mm dia |
| 4 | (d) Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow. |
| 5 | (e) Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded . |
| 6 | (f) Removing old unserviceable/rusted MS Plate and S/F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos hole. |
| 7 | (g) M & L for removing old U/S plywood and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (with cuck nut) (bolt size 75mmx6). Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top. Rest all as per directed by Engr-in-Charge.Make of plywood - Archid Ply/Green ply/Century. |
| 8 | Almirah Steel med (FD 67/1032)S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed(a) Lock with duplicate keys (Make of Lock-Godrej/Harrison/Link/Rina) |
| 9 | (b) Handle 100 mm size chromium plated |
| 10 | (c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 11 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 12 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.(Note for steel painting;- All steel surface shall be done with spray painting)(Make of Lock-Godrej/Harrison/Link) |
| 13 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 14 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats externally and internally of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 15 | Almirah steel large (FD-67/1031/OP)S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed(a) Lock duplicate keys (Make of Lock-Godrej/Harrison/Link) |
| 16 | (b) Handle 100 mm size chromium plated |
| 17 | (c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 18 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 19 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-Godrej/Harrison/Link) |
| 20 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 21 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 22 | Locker steel (FD-1029)S & F following components of Locker steel including dismantling unservicable one all as specified and as directed.(a) Handle 100 mm size chromium plated |
| 23 | (b) Hasp & staple 100mm chromium plated |
| 24 | (c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with two coats of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer. |
| 25 | (d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with two coats of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. |
| 26 | (e) S & F new curtain rod SS of size 20mm dia of 0.5mm wall thickness of locker steel along with curtain bracket. |
| 27 | (f) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying two coats of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge. |
| 28 | Table office officer/clerk steel (FD-84/1003,1004 )S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed.(a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. |
| 29 | (b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer. |
| 30 | (c) Lock with duplicate keys(Make- Godrej/Harrison/Link/Rina) |
| 31 | (d)Table top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel |
| 32 | (e)Table top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel |
| 33 | (f) PVC shoe |
| 34 | (g) Preparation of old painted steel sufaces by scraping with emary paper and welding as reqiured cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel. |
| 35 | (h) Preparation of old painted steel sufaces by scraping with emary paper and welding as required cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel. |
| 36 | Table Dining 1520 x 860 x 760mm Steel (ORs) (a) Removing of old unserrviceable top of table1520x860x760 mm and S & F new top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around. |
| 37 | (b) Preparation of old painted steel sufaces of table1520x860x760mm steel by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth and applying two coats of olive green synthetic enamel paint including fixing of four Nos of PVC shoes to each leg. |
| 38 | Chair visitors /Chair Writing MAP Trade Pattern(a) Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 39 | (b) Supply and Fix New SEAT & back (Cushion,tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 40 | (c) Supply and fix handle(in Pairs) of chair visitors of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 41 | (d) M&L for painting two coats of Black paint in Iron frame of Chair Visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed. |
| 42 | Chair computer/revolving- (a) Chair revolving of different Make and Model (SEAT & BACK) re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 43 | (b) Supply and Fixing in replacement New SEAT & back (Cushion,tapestry & ply) complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 44 | (c) Supply and fixing in replacement of hydraulic system of chair revolving complete all as specified and directed. |
| 45 | (d) Supply and fixing in replacement handle(pair) of chair revolving of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 46 | (e) Supply and fixing in replacement of complete base plate of seat of chair revolving complete all as specified and directed . |
| 47 | (f) Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving complete all as specified and directed . |
| 48 | (g) Supply and fixing in replacement of coaster wheel of appropirate size heavy duty of chair revolving complete all as specified and directed . Please Enable Macros to View BoQ information |
