|
| 1 | S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the head board and 4mm thick plywood ISI marked commercial face on both side of the head board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – ChargeDrg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable |
| 2 | S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the foot board and 4mm thick plywood ISI marked commercial face on both side of the foot board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable |
| 3 | S&F in replacement long rail made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable |
| 4 | S&F in replacement Plywood top (Cover) 12 mm thick plywood BWR ISI marked, of size 1800mm x 900mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable |
| 5 | S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No '3' . |
| 6 | S&F in replacement Legs made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214, FD – 246, FD/E6/MAP/8(R) as applicable |
| 7 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of bed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246 |
| 8 | S&F in replacement Top of tables dining 6 persons made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak Wood beading all around complete all as specified & directed by Engineer-in-Charge.Drg No. FD-239, FD-273 |
| 9 | S&F in replacement front rail of dining 6 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 10 | S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 11 | S&F in replacement Legs of table dining 6 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 12 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 |
| 13 | S&F in replacement Top of tables dining 8 persons made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak Wood beading all around complete all as specified & directed by Engineer-in-Charge.Drg No. FD-239, FD-273 |
| 14 | S&F in replacement front rail of dining 8 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 15 | S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 16 | S&F in replacement Legs of table dining 8 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 |
| 17 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 |
| 18 | S&F in replacement Top of the table writing made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer-in-Charge.Drg No. FD-275 |
| 19 | S&F in replacement shutter of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275 |
| 20 | S&F in replacement side and back of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275 |
| 21 | S&F in replacement drawer table writing made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275 |
| 22 | S&F in replacement leg table writing made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275 |
| 23 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table writing complete all as specified and directed by Engineer - in – Charge. Drg : FD – 275 |
| 24 | S&F in replacement Top of side board made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-241 |
| 25 | S&F in replacement Side of side board made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-241 |
| 26 | S&F in replacement Back of side board made out of 6mm thick ply wood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-241 |
| 27 | S&F in replacement Drawer of side board made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : FD-241 |
| 28 | S&F in replacement leg of side board made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-241 |
| 29 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of side board complete all as specified and directed by Engineer - in – Charge Drg : FD – 241 |
| 30 | S&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384 |
| 31 | S&F in replacement leg of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384 |
| 32 | S&F in replacement Long rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384 |
| 33 | S&F in replacement short rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384 |
| 34 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384 |
| 35 | S&F in replacement Top of Teapoy verandah made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge |
| 36 | M & L for applying two coat of synthic enamel paint wihite to teapoy Verandha including preparation of surfaces complete all as specified and directed by Engr-in-Change |
| 37 | S&F in replacement mirror of table dressing Gents complete all as specified and directed by Engineer-in-Charge. Drg No -FD-230, FD-379 FD/E6/MAP /16 |
| 38 | S&F in replacement back ply of table dressing gents made out of 6mm thick ply wood ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 |
| 39 | S&F in replacement Top of table dressing gents made out of 12mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 |
| 40 | S&F in replacement drawer of table dressing gents made out of 6mm thick plywood commercial face both side ISI marked at bottom & 12mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge.Drg No -FD-230, FD-379 |
| 41 | S&F in replacement mirror frame of table dressing gents made out of Ist class hard . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 |
| 42 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table dressing gents complete all as specified and directed by Engineer - in – Charge Drg : FD – 230, FD-379 |
| 43 | S&F in replacement mirror of table dressing ladies complete all as specified & directed by Engineer-in-Charge. Drg : FD-251, FD-378 |
| 44 | S&F in replacement 5mm thick sliding glass with aluminium channel (anodised) of table dressing ladies complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 |
| 45 | S&F in replacement Drawer of table dressing ladies, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 |
| 46 | S&F in replacement back ply of table dressing ladies 12mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 |
| 47 | S&F in replacement mirror frame of table dressing ladies, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 |
| 48 | S&F in replacement back ply of mirror table dressing ladies 6mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 |
| 49 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table dressing ladies complete all as specified and directed by Engineer - in – Charge Drg : FD – FD – 251, FD-378 |
| 50 | S&F in replacement top of table centre, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg :FD-231, FD-274, FD-232, FD-278, FD-382 |
| 51 | S&F in replacement Leg of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge |
| 52 | S&F in replacement Long rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382 |
| 53 | S&F in replacement Short rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382 |
| 54 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table centre complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382 |
| 55 | S&F in replacement Top of Teapoy made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382 |
| 56 | S&F in replacement Leg of teapoy, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382 |
| 57 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table teapoy complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382 |
| 58 | S&F in replacement Top of table size 900 x 600 x 760 mm, made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-223,FD-224, FD-283, FD-284 |
| 59 | S&F in replacement leg and stiffener of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 |
| 60 | S&F in replacement Drawer of table size 900 x 600 x 760 mm, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 |
| 61 | S&F in replacement long rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 |
| 62 | S&F in replacement short rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 |
| 63 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table 900 x 600 X 760 MM with or without drawer complete all as specified and directed by Engineer - in – Charge Drg : FD – 223, FD – 224, FD – 283, FD – 284 |
| 64 | S&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading all around complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 |
| 65 | S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 |
| 66 | S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 |
| 67 | S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 |
| 68 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248 |
| 69 | S&F in replacement Top of table size 900 x 900 x 760 mm, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-291 |
| 70 | S&F in replacement leg of table size 900 x 900 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-291 |
| 71 | S&F in replacement rails of table size 900 x 900 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-291 |
| 72 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table 900 X 900 X 760 MM compl ete all as specified and directed by Engineer - in – Charge Drg :FD – 291 |
| 73 | S&F in replacement mirror of Hat Stand complete all as specified & directed by Engineer-in-Charge.Drg : FD-235, FD-361 |
| 74 | S&F in replacement Front teak face ply of Hat Stand made out of 4mm thick plywood teak face at one side and commercial face at other side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 |
| 75 | S&F in replacement Back Ply of Hat Stand made out of 4mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 |
| 76 | S&F in replacement Beading 35mm wide, 6 mm thick alround the hat stand made out of teak wood complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 |
| 77 | S&F in replacement Hook oxide steel pegs 120 mm long of Hat Stand complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 |
| 78 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Hat Stand complete all as specified and directed by Engineer - in – Charge Drg : FD – 233 FD-361 |
| 79 | S&F in replacement Top of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked with 1mm thick laminated sheet and complete all as specified & directed by Engineer-in-Charge.Drg : FD-45(m), FD-237 |
| 80 | S&F in replacement shutter of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 |
| 81 | S&F in replacement shelf of size 380x205x18mm /shelf (size 735x275x18mm) of Book case made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 |
| 82 | S&F in replacement back ply of Book case made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 |
| 83 | S&F in replacement Leg of Book case made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 |
| 84 | S&F in replacement MS Hinges medium weight cold rolled of size 50mm long of book case complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 |
| 85 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Book Case complete all as specified and directed by Engineer - in – Charge Drg : FD – 45 (M) , FD-237 |
| 86 | S & F in replacement of Top of table computer MAP made from 18mm thick melamine shade pre-laminated particle board including 4mm thick TW edging duly polished all as specified on drawing. FD/E6/ MAP/03 |
| 87 | S & F in replacement of key board fitted with telescopic channel MS drawer slides all shown on drawing . FD/E6/ MAP/03 |
| 88 | S & F in replacement of Drawer with lock made out of 6mm thick plywood commercial face both side at bottom and 18mm thick pre-leminated particla board at side front and back FD/E6/ MAP/03 |
| 89 | S & F in replacement of 18mm thick prelaminated particle board pull out tray for mouse on telescopic channel FD/E6/ MAP/03 |
| 90 | M & L for applying two coat of synthetic enamel paint including preparation of previously treated/old steel surface of table conputer complete all as specified and directed by Engineer -in- Charge. |
| 91 | S&F in replacementof Nylon buffers and PVC Shoes of table computer complete all as specified and directed by Engr-in-Change. FD/E6/ MAP/03 |
| 92 | S&F in replacement Top of Almirah Mess utensils size 1065x434x19mm, made out of block board ISI marked covered with 1mm thick laminated sheet along with 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-93 |
| 93 | S&F in replacement Shelf of Almirah Mess utensils size 1025x420x 19mm, made out of planks of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-93 |
| 94 | S&F in replacement Back Ply of Almirah Mess utensils size 1065x1570x10mm, made out of 10mm thick plywood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-93 |
| 95 | S&F in replacement Shutter of Almirah Mess utensils made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet comp lete all as specified and directed by Engineer - in – Charge. Drg : FD-93 |
| 96 | S&F in replacement Aluminium handle anodised 100mm long and hasp & staple 75mm long of aluminium anodised complete of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93 |
| 97 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Almirah Mess Utensils complete all as specified and directed by Engineer - in – Charge Drg : FD – 93 |
| 98 | S&F in replacement knob of CP Brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by Engineer - in – Charge |
| 99 | S&F in replacementof 100 mm thick foam rubber cushion of size 530x560 mm , 32 density duly covered with tapestry cloth for seat and back complete all as specified and directed by Engineer-in-Charge. Note : Tapestry cloth should not be not less than the rate of Rs 300/- per mtr Drg : FD-258 , FD-281 and FD -373, FD-MAP-II Note:- Sample of cloth should be approved by BSO/GE |
| 100 | S&F in replacement of arm of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 101 | S&F in replacement leg of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 102 | S&F in replacement side rail (size 100 mm x 35 mm) of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 |
| 103 | S&F in replacement front rails of sofa set seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 104 | S&F in replacement (seat and back) batten of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 105 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Sofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 106 | S&F in replacement of arm of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 107 | S&F in replacement leg of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 108 | S&F in replacement side rail (size 100 mm x 35 mm) of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 |
| 109 | S&F in replacement front rails of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 110 | S&F in replacement (seat and back) batten of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 111 | S&F in replacement bottom rail of seat and back of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258, FD-281 and FD-373 and FD Map-II |
| 112 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Sofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II |
| 113 | S&F in replacement top (size 1900 x 685 mm) of table dining ORs made out of 19mm thick block board commercial type ISI marked covered with 1mm thick laminated sheet including 4mm thick teak wood beading complete all as specified and directed by Engr-in-Change Drg : FD-165 (M) |
| 114 | S&F in replacement members of frame of table dining ORs/Forms with or without back such as legs, stiffeners etc made out of M.S. pipe 25 Sqmm (16 gauge wall thickness) including cutting, welding, bending etc providing one coat of red oxide primer complete all as specified and directed by Engr-in-Change Drg : FD-165 (M) 77 (M) 78 (M) |
| 115 | M & L for applying two coat of synthetic enamel paint including preparation of previously treated/old steel surface of mild steel tube frame of table dining ORs complete all as specified and directed by Engineer -in- Charge. Drg : FD-165 (M) |
| 116 | S&F in replacement of Seat cushion of chair dining cushioned, 75mm thick of 32 density duly covered with tapestry cloth complete all as specified and directed by Engr-in-charge.Drg : FD/E6/MAP-II/04 Note :- Tapestry cloth should not be less than the rate of Rs. 300/- per RM. |
| 117 | S&F in replacement Front leg and rear leg each of chair dining made out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04 |
| 118 | S&F in replacement Front/side/back rail/Stiffener of chair dining made out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04 |
| 119 | M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Book Case complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP-II/04 |
| 120 | S&F in replacement Front leg and rear leg each of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285 |
| 121 | S&F in replacement Front rail/back rail/side rail /stiffener of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 |
| 122 | S&F in replacement back rest of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 |
| 123 | S&F in replacement Seat (Made out of BWR plywood commercial type 6 mm thick ISI marked) of chair wooden Bottomcomplete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 |
| 124 | M & L for preparing of all exposed wooden or wood based surfaces of chair wooden without arms and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge DRG NO.FD-56,FD-285 |
| 125 | S&F in replacement Cushion (50mm thick of 32 denasity) with tepastry cloth cover as per existing design of Stool dressing cushioned complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP Note:- Tapestry cloth shall be of superior cloth of costing not less than Rs 275 per meter with 1.25 meter width as apptoved by BSO |
| 126 | S&F in replacement leg/front rail/side rail of Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP |
| 127 | M & L for preparing of all exposed wooden or wood based surfaces of stool dressing cushioned and applying two coats of Melamine polish complete all as specified and directed by Engineer-in-Charge.DRG NO. FD-282&TP, FDE6/MAP/14 |
| 128 | S&F in replacement leg of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273 |
| 129 | S&F in replacement Long rail and short rail each of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273 |
| 130 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 |
| 131 | S&F in replacement Box of desk made out of 18 mm thick pre-laminated partical board including 4mm thick teak wood beading complete all as specified and directed by Engineer-in-Charge Drg : FD-107 (M) & FD-1021 |
| 132 | M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk complete all as specified and directed by Engineer-in-Charge. Drg : FD-107 |
| 133 | S&F in replacement Shutter made out of 18 mm thick prelaminated particle board with piano type hinges as per existing to Bin multipurpose MAP with handle 10mm long complete all as specified and as directed by Engineer-in-Charge Drg : FD/E6/MAP/09 |
| 134 | S&F in replacement drawer as per existing and as shown on drg to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge.Note :- Tapestry Cloth should not be less than the rate of Rs. 200/-per RM. Drg : FD/E6/MAP/09 |
| 135 | M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk complete all as specified and directed by Engineer-in-Charge. Drg : FD-107 |
| 136 | S&F in replacement seat plank of form without back and form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M) |
| 137 | S&F in replacement back plank of form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M) |
| 138 | M & L for applying one coat of synthetic enamel paint including preparation of previously treated/old steel surface on frame of form with back complete all as specified and directed by Engineer -in- Charge. Drg : FD-77M) Please Enable Macros to View BoQ information |
