Tender For special Repair Of Horse Stall At Line No 11 (Stallion Stable) And Hard Standing Paddocks Of Animal Lines No 02 And 04 At Ebs Babugarh Under Ge (North) Meerut Cantt
Tender Value
48.54 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
3 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Horse Stall At Line No 11 (Stallion Stable) And Hard Standing Paddocks Of Animal Lines No 02 And 04 At Ebs Babugarh Under Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed. |
| 2 | M&L Brick masonry with fly ash bricks straight or curved on plan exceeding 6m mean radius, old size bricks, built in Cement Mortar 1:6 complete all as specified and directed. |
| 3 | All as per item No. 02 here-in-before but except bricks complete all as specified and directed.Note :- Old Serviceable bricks retrieved from Serial item No. 1 shall be re-used. |
| 4 | M&L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 5 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for 15mm thick rendering using ready mix plaster bags on brick / concrete surfaces of walls finished even and fair using water proofing compound 200ml for 50 kg weight of cement bag as per manufacturer instructions complete all as specified and directed. Note :- (i) WPC shall be mixed as per manufacturers instructions.(ii) WPC shall be measured & paid separetly. |
| 7 | Supply only integral water proofing compound complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surface of walls applying two coats of white wash complete all as specified and directed. |
| 9 | M&L preparing plastered Old surfaces of walls applying two coats of white wash complete all as specified and directed. |
| 10 | Dismantling timber scantlings under 40 sq cm in section as in fillets, rails, posts, rafters, purlins, etc. in section, in any position unframed work complete all as specified and directed. |
| 11 | S&F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) posts and struts in fencing including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 12 | S&F for not exc 4.0 Kg/sqm expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 13 | M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | Cutting chases ,pinning in brick work girth exc 10cm but not exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed. |
| 15 | S&F in reapair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including connecting union to pipe, overall size 560mmx450mmx240mm complete all as specified and directed. |
| 16 | Taking up or down PVC tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed. |
| 17 | Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 18 | S&F in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 19 | Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. |
| 20 | M&L PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 21 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed. |
| 22 | Finishing surface of concrete roads, pavements,brooming complete all as specified and directed. |
| 23 | Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed. |
| 24 | Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC conduit of size 20/25 mm dia medium grade complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :- |
| 25 | One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps. |
| 26 | One fan point/Exhaust fan point controlled by one, one way switch 05/06 Amps |
| 27 | One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 28 | One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 29 | All as per serial item No 24.02 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent boardwith earth wire of same size i.e. 2.50 Sqmm. |
| 30 | Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. |
| 31 | Supply and fix in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. |
| 32 | Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. |
| 33 | Supply and fix switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. |
| 34 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified & directed. |
| 35 | Supply and fixing LED lamp 9/10 watt complete all as specified & directed. |
| 36 | Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed. |
| 37 | Supply and fixing 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified & directed. |
| 38 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed. |
| 39 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable FRLSH with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable FRLSH drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. Note:- Two run of submain wire, one run earth wire & PVC conduit shall be measured as one length. |
| 40 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as specified & directed. |
| 41 | Supply and fixing MCB, SP, AC, 240 volts \\"C\\" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 42 | Supply & fixing Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed. |
| 43 | Supply and fixing MCCB 4 pole, 63 Amps 25 kA complete all as specified & directed. |
| 44 | Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 16 kA 63 Amp G frame MCCB. with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed. |
| 45 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of bolts, nuts, check nuts, washers of galvanised iron steel and GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part-I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit in PCC 1:3:6 and RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.NOTE:- The main earthing GI wire from earth electrode to test point upto 7.5 metres shall be included in unit rate quoted by the contractor. |
| 46 | Supply and fixing Air circulator fans 230 volts single phase oscillating 450mm sweep suitable for wall mounting complete all as specified and direced. |
| 47 | Supply and fixing fan ceiling complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and direced. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender