Tender For Repairs To Drain , Compound Wall, Footpath And Certain Misc Extra Services At Nsb , Old Mo(V),Namac,Ctw, Ashoka Park, Pallava Park And Wed Age B/R -Iii Of Ge (Nd)Visakhapatnam
Tender Value
40 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Drain , Compound Wall, Footpath And Certain Misc Extra Services At Nsb , Old Mo(V),Namac,Ctw, Ashoka Park, Pallava Park And Wed Age B/R -Iii Of Ge (Nd)Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2026 | Amendment to BOQ | BOQ | 09-Jul-2026 |
| 2 | 07-Jul-2026 | Extension of bidding date | Date | 16-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land |
| 3 | M&L for Brick work with Fly Ash Bricks straight or curved on plan exc 6m mean radious built in CM 1:6 complete all as specified and as directed. |
| 4 | M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M&L, PCC 1:2:4 type B2 using 20mm graded stone aggregate as in bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating, including form work complete all as specified and as directed. |
| 6 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 7 | M&L extra forming fair finish to drain or channel surface 30cm inner girth in cement concrete with using extra cement complete all as specified and directed. |
| 8 | Add or deduct from the item above for forming fair finished channels or drains for each 25 mm girth or part therof over or under 30 cm complete. all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 10 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished smooth and even without using extra cement. |
| 11 | M&L Preperation of newly plastered surfaces of wall and apply three coat of white wash |
| 12 | M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller surfaces incl preparation of surfaces |
| 13 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 14 | S&F for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make. Complete all as specified and as directed. (Upto 4th Floor) |
| 15 | S&F for 0.80mm thick, Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 as specified.(Upto 4th Floor) |
| 16 | S&F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed. |
| 17 | S&F in repairs concertina coil fencing with punched tape concertina coil made from high tensile spring steel ,high carbon wire confirming to IS-4454 Part-I of grade -SM duly hot dipped galvanised 600 mm dia, over 10m openable length with galvanised coating and punched tape material as per IS-513 having 50 Nos rounds per 6m length (before stretching ) having medium barbs (barb length 24+1mm or 24-1 mm ,pitch between two barbs 35+1 mm or (35-1mm) spring core wire (2.5mm thick) of high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478 gramsm / m and fixing to Y or trapezoidal shaped angle iron bracket placed at 2m to 3m apart with 6/9 horizontal RBT (reinforced barbed tape ) wire stud tied with GI staples and GI Clips to retain horizontal ,including necessary bolts and coating with Px compound (anti rust ) complete all as specified and as directed. |
| 18 | S&F in repairs concertina coil fencing with punched tape concertina coil made from high tensile spring steel ,high carbon wire confirming to IS-4454 Part-I of grade -SM duly hot dipped galvanised 1050 mm dia, over 10m openable length with galvanised coating and punched tape material as per IS-513 having 50 Nos rounds per 6m length (before stretching ) having medium barbs (barb length 24+1mm or 24-1 mm ,pitch between two barbs 35+1 mm or (35-1mm) spring core wire (2.5mm thick) of high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478 gramsm / m and fixing to Y or trapezoidal shaped angle iron bracket placed at 2m to 3m apart with 6/9 horizontal RBT (reinforced barbed tape ) wire stud tied with GI staples and GI Clips to retain horizontal ,including necessary bolts and coating with Px compound (anti rust ) complete all as specified and as directed. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 20 | S & F Mild steel Angles, bars, flats etc., as in supports for drain cover, stiffening of fencing post struts , wall ties, hold fasts, clamps and similar small articles confirming toFe 290 Gde-E-165 |
| 21 | M&L Preperation old painted surfaces of steel and applying one coat of synthetic enamel paint any description not other described over 10cm width or girth complete all as specified and as per specified by Engineer -in-Charge . |
| 22 | M&l Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth. |
| 23 | Dismantling chain link fencing wiremesh of any type. |
| 24 | M&L for 4 mm dia MS galvanised PVC coated chain link fenecing of 50mmX50mm mesh inculding line wires fixed with any of standards, rails, straining bolts, etc including provision of necessary binding wires all as directed. |
| 25 | S&F Mild steel work in hand rails ,wind ties,posts,posts and struts in fencing screwed or welded to the shape as directed including all necessary drilling ,bolting or riveting etcand similar work confirming to Fe 290 Gde E-195. |
| 26 | Demolition of RCC of any description and in any position not otherwise specifically provided. |
| 27 | M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 28 | M&L for Providing precast cement concrete Type B-1 (1:2:4) 20mm graded stone aggregate as landings, cover slabs (for man holes,open drain etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces etc. and setting in mortar CM 1:6 complete with joints to match all as specified and directed. |
| 29 | M&L for 20 mm thick Granite work (table rubbed and polished) in decorative shelves, steps , pillars ,jambs, coocking plateform etc with chemfering of edge and in CM 1:4 including pointing in white cement with pigment to match with shade of granite including grinding,polishing& dismantling complete all as specified and as directed. |
| 30 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level). |
| 31 | M & L for providing 100 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in flooring,road / path, hard standing finishing the concrete surface even and smooth without using extra cement etc complete all as specified and directed. |
| 32 | M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 33 | M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 34 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments including removal of old floorin complete all as specified and directed. |
| 35 | M&L for removal of existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machine removal of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty ) and then apply one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm by using auto roller upto 4th floor complete all as specified and as per specified by Engineer -in-Charge . |
| 36 | M&L Preperation of old plastered surfaces of wall and apply one coat of white wash Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender