Tender For Repair/ Maintenance Of Pumps And Motors Including Sewage Pumps And Various Other E/M Works At Water Supply Installations At Ch (Ec) Complex Including Ii Line Under Ge Alipore Kolkata
Tender Value
35 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE Alipore Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Pumps And Motors Including Sewage Pumps And Various Other E/M Works At Water Supply Installations At Ch (Ec) Complex Including Ii Line Under Ge Alipore Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Centrifugal pump / Submersible cetrifugal (open oil) pump set from existing position for carrying out repair works and re-assembling, re-installing the pump set in original position for pump capacity 25 HP complete all as specified and directed.Note: Spare parts, winding wires, etc required for renewal shall be measured and paid separately. |
| 2 | All as per BOQ Serial item No 1 above but pump of capacity 20 HP complete all as specified and directed. |
| 3 | All as per BOQ Serial item No 1 above but pump of capacity 15 HP complete all as specified and directed. |
| 4 | Dismantling and opening the motor from pump set in existing position and M&L for carrying out rewinding work with new super enamelled copper wire of suitable gauge (as per existing) and heat varnishing with all other material required for rewinding by carrying the motor to outside the cantonment area, re-assembling and refixing the same with pump in original position for the following capacity of motor complete all as specified and directed.:- |
| 5 | 25 HP 3 Phase . |
| 6 | 20 HP 3 Phase . |
| 7 | 15 HP 3 phase . |
| 8 | S&F following spare parts for pump set including motor for 20 /25HP centrifugal pump complete all as specified and directed.:- |
| 9 | Impeller CI |
| 10 | Pump shaft |
| 11 | Neck ring |
| 12 | Shaft Sleeve |
| 13 | Bearings No 6305/6306/6309 as per sample |
| 14 | S&F following spare parts for pump set including motor complete for 15 HP centrifugal pump complete all as specified and directed.:- |
| 15 | Impeller CI |
| 16 | Pump shaft |
| 17 | Neck ring |
| 18 | Shaft Sleeve |
| 19 | Bearing No 6303/6305 as per sample |
| 20 | Taking down monoblock / Booster pump set from existing position for carrying out repair works and re-assembling, re-installing the pump set in original position for pump capacity 15 HP complete all as specified and directed.Note: Spare parts, winding wire, etc required for renewal shall be measured and paid separately |
| 21 | All as per BOQ Serial item No 7 above but pump capacity 10 HP/7.5 HP complete all as specified and directed. |
| 22 | All as per BOQ Serial item No 7 above but pump capacity 5 HP complete all as specified and directed. |
| 23 | All as per BOQ Serial item No 7 above but pump capacity 3 HP complete all as specified and directed. |
| 24 | All as per BOQ Serial item No 7 above but pump capacity 2HP/1.5 HP/1HP complete all as specified and directed. |
| 25 | M&L for rewinding for 3 Phase motor of monoblock pump / Booster pump motor set with new super enamelled copper wire of suitable gauge as per existing including heat varnishing complete for following sizes of motor complete all as specified and directed. :- |
| 26 | 15 HP |
| 27 | 10 HP |
| 28 | 7.5HP |
| 29 | 3 HP |
| 30 | M&L for rewinding work for single Phase motor of monoblock pump / Booster pump motor set with new super enamelled copper wire of suitable gauge as per existing including heat varnishing complete for following sizes of motor complete all as specified and directed. :- |
| 31 | 1 /1.5 HP |
| 32 | Supply only the following spare parts for pump set including motor for 15 HP monoblock pump complete all as specified and directed.:- |
| 33 | Impeller CI |
| 34 | Gland coller CI |
| 35 | Shaft sleeve |
| 36 | Gland packing with suitable size of nut & bolt complete set |
| 37 | Neck ring |
| 38 | Ball bearing No 6307/6308 as per sample |
| 39 | Supply only the following spare parts for pump set including motor complete for 10 HP monoblock pump complete all as specified and directed.:- |
| 40 | Impeller CI |
| 41 | Gland coller CI |
| 42 | Shaft sleeve |
| 43 | Gland packing with suitable size of nut & bolt complete set |
| 44 | Neck ring |
| 45 | Ball bearing No 6307/6308 as per sample |
| 46 | Supply only the following spare parts for pump set including motor complete for 7.5 /5 HP monoblock pump complete all as specified and directed.:- |
| 47 | Impeller CI |
| 48 | Shaft sleeve |
| 49 | Neck ring |
| 50 | Ball bearing No 6209 as per sample |
| 51 | Supply only the following spare parts for pump set including motor complete for 3 HP monoblock pump complete all as specified and directed.:- |
| 52 | Impeller CI |
| 53 | Gland CI |
| 54 | Shaft sleeve |
| 55 | Neck ring |
| 56 | Ball bearing No 6209 as per sample |
| 57 | Supply only the following spare parts for pump set including motor complete for 2/1.5/1.0 HP monoblock pump complete all as specified and directed.:- |
| 58 | Ball bearing as per sample |
| 59 | Impeller CI |
| 60 | Mechanical Seal |
| 61 | Neck ring |
| 62 | Dismantling of all electric & water connections and lifting of submersible pump and motor including column pipe with the help of chain pulley block for pump capacity 15 HP, opening of pump and motor, cleaning, servicing and replacement of spare parts where directed complete all as specified and directed. |
| 63 | All as per BOQ Serial item No 19 above but 10 HP complete all as specified and directed. |
| 64 | All as per BOQ Serial item No 19 above but 2 HP complete all as specified and directed.Note: Spare parts, winding wire, etc required for renewal shall be measured and paid separately |
| 65 | M&L for rewinding work for 3 Phase submersible motor with new PVC insulated super enamelled copper wire of suitable gauge as per existing complete for the following sizes of motor complete all as specified and directed. :- |
| 66 | Supply only the following spare parts of submersible tubewell pump motor of capacity 15 HP complete all as specified and directed. :- |
| 67 | Impeller CI |
| 68 | Neck ring |
| 69 | Thrust Bearing |
| 70 | Shaft sleeve |
| 71 | Shaft |
| 72 | Supply only the following spare parts of submersible tubewell pump motor of capacity 10HP complete all as specified and directed. |
| 73 | Impeller CI |
| 74 | Neck ring |
| 75 | Thrust Bearing |
| 76 | Shaft sleeve |
| 77 | Taking down Submersible non clogging sewage pump set from existing position for necessary repairs and reassembling, refixing the same in original position for pump of capacity 10/15 HP complete all as specified and directed.Note: Spare parts, winding wire, etc required for renewal shall be measured and paid separately. |
| 78 | Taking down Submersible non clogging sewage pump set from existing position for necessary repairs and reassembling, refixing the same in original position for pump of capacity 3 HP complete all as specified and directed.Note: Spare parts, winding wire, etc required for renewal shall be measured and paid separately. |
| 79 | Taking down Submersible non clogging sewage pump set from existing position for necessary repairs and reassembling, refixing the same in original position for pump of capacity 20 HP complete all as specified and directed.Note: Spare parts, winding wire, etc required for renewal shall be measured and paid separately. |
| 80 | M&L for rewinding work for 3 Phase motor of submersible non-clogging pump set with super enamelled copper wire of suitable gauge with all other materials required for re-winding of motor of capacity 10 HP complete all as specified and directed. |
| 81 | M&L for rewinding work for 3 Phase motor of submersible non-clogging pump set with super enamelled copper wire of suitable gauge with all other materials required for re-winding of motor of capacity 3 HP complete all as specified and directed. |
| 82 | M&L for rewinding work for 3 Phase motor of submersible non-clogging pump set with super enamelled copper wire of suitable gauge with all other materials required for re-winding of motor of capacity 20 HP complete all as specified and directed. |
| 83 | M&L for rewinding work for 3 Phase motor of submersible non-clogging pump set with super enamelled copper wire of suitable gauge with all other materials required for re-winding of motor of capacity 15 HP complete all as specified and directed. |
| 84 | Supply only the following spare parts for 10 /15 HP submersible sewage pump complete all as specified and directed:- |
| 85 | Pump Shaft with rotar |
| 86 | Impeller CI |
| 87 | Bearing as per sample |
| 88 | Mechanical Seal (2 nos set) |
| 89 | Supply only the following spare parts for 20 HP submersible sewage pump complete all as specified and directed.:- |
| 90 | Mechanical Seal (2 nos in set) |
| 91 | Impeller CI |
| 92 | Bearing as per sample |
| 93 | Supply only the following spare parts for 3 HP submersible sewage pump complete all as specified and directed.:- |
| 94 | Pump Shaft |
| 95 | Impeller CI |
| 96 | Bearing as per sample |
| 97 | Mechanical Seal (2 nos in set) |
| 98 | Supply only hydraulic oil , suitable for 10 HP, 15 HP, 20 HP Submersible non clogging sewage pump set as per sample complete all as specified and directed. |
| 99 | M&L for febrication of MS base made of MS Channel of size 50 X 100 mm, 5 mm thickness and length 1 to 1.2 m including reinforecement as directed and grouting 04 Nos bolts of size 5/8\\" X 6\\" long including proper alignment of pump and motor and adjustable system of base plate including necessary cement work incuding with dismantling of old worn out base plate complete all as specified and directed. |
| 100 | M&L for painting with one coat of synthetic enamel paint after cleaning all dirts from old surface for pump set of different capacity and other equipments complete including writing letters or figures as required for following capacity of pump set complete all as specified and directed.:- |
| 101 | 20/25 HP |
| 102 | 15 HP |
| 103 | 10/7.5 HP |
| 104 | 2/1.5/1 HP |
| 105 | S&F in repairs motor-pump couppling rubber , suitable for 25 HP, 20 HP, 15 HP, 10 HP, 7.5 HP, 5 HP of pump and motor set complete all as specified and directed. |
| 106 | S&F in repairs water proof submersible flat copper cable 16 Sqmm 3 core, 3 phase, 440 Volts complete all as specified and directed. |
| 107 | S&F in repairs water proof submersible flat copper cable 10 Sqmm 3 core, 3 phase, 440 Volts complete all as specified and directed. |
| 108 | S&F in repairs water proof submersible flat copper cable 6 Sqmm 3 core, 3 phase, 440 Volts complete all as specified and directed. |
| 109 | S&F in repairs fully-automatic star delta starter suitable for 15 HP motor, 3 phase, 415 Volts complete all as specified and directed. |
| 110 | S&F in repairs fully-automatic star delta submersible pump starter suitable for 10 to 12.5 HP motor, 3 phase, 415 Volts complete all as specified and directed. |
| 111 | S&F in repairs fully automatic star delta starter suitable for 5 to 7.5HP motor,3phase, 415 Volts complete all as specified and directed. |
| 112 | S&F in repairs DOL starter suitable for 3 HP motor,3 phase, 230 Volts complete all as specified and directed. |
| 113 | S&F in repairs contactor MNX 18, 18A-30A capacity, 415 Volts rating. |
| 114 | S&F in repairs contactor ML 2, 32A capacity, 415 Volts rating complete all as specified and directed. |
| 115 | S&F in repaird contactor ML 1.5, 25A capacity, 415 Volts rating complete all as specified and directed. |
| 116 | S&F in repairs over load Relay, MN2, currrent rating 24 -40 A, suitable for MNX Contractor, 415 Volts rating complete all as specified and directed. |
| 117 | S&F in repairs over load Relay,MN2, currrent rating 20- 33, suitable for MNX Contractor, 415 Volts rating complete all as specified and directed. |
| 118 | S&F in repairs over load Relay,MN2, currrent rating 14- 23, suitable for MNX Contractor, 415 Volts rating complete all as specified and directed. |
| 119 | S&F in repairs over load Relay,MN2, currrent rating 9- 15, suitable for MNX Contractor, 415 Volts rating complete all as specified and directed. |
| 120 | S&F in repairs Auxiliary contactor of 2NO & 2NC, suitable for MNX contractor, 415 Volts rating complete all as specified and directed. |
| 121 | S&F in repairs Single Phase Preventer auto reset, 50 V unbalance complete all as specified and directed. |
| 122 | S&F in repairs copper conductor cable multi stranded sheathed 3 core of 1100 volts grade of following sizes complete all as specified and directed.:- |
| 123 | 4 Sqmm |
| 124 | 6 Sqmm |
| 125 | 10 Sqmm |
| 126 | S&F in repairs double flanged single door type swing check reflux (Non return) with by pass arrangement valve conforming to IS-5312 of following sizes including supply and fixing suitable size of nut bolts washer and gasket etc. complete all as specified and directed. |
| 127 | 80 mm |
| 128 | 50 mm |
| 129 | Taking up Steel/GI water tubing and connection from trench/wall/floor, bore of following sizes complete all as specified and directed.:- |
| 130 | 80 mm dia |
| 131 | 50 mm dia |
| 132 | 40 mm dia |
| 133 | 25 mm dia |
| 134 | 20 mm dia |
| 135 | 15 mm dia |
| 136 | S&F 150 dia bore for GI water tubing medium grade including all fittings (such as ends, Bend, elbows, unions, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions etc) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches , etc also for cutting ,screwing and waste and for making forged bends on piping as required . Connectors shall be inserted,where required or directed. The rates also include cutting through walls, floors, etc and their making good fixed laid in wall/ ceiling/ floor complete all as specified and directed. |
| 137 | All as per BOQ Serial item No 58 above 80 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 138 | All as per BOQ Serial item No 58 above 50 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 139 | All as per BOQ Serial item No 58 above 40 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 140 | All as per BOQ Serial item No 58 above 25 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 141 | All as per BOQ Serial item No 58 above 20 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 142 | All as per BOQ Serial item No 58 above 15 mm dia but laid in wall/ceiling/floor complete all as specified and directed. |
| 143 | S&F Flange GI/MS pipes and fittings i.e Flange joint with rubber or fibre board gasket ,nuts, bolts including taking down old one etc complete all as specified and directed of following sizes :- |
| 144 | dia 100 mm |
| 145 | dia 80 mm |
| 146 | S&F MS Pipe heavy grade including all fittings(including flange and nut bolt,Bend,Tee) required for used as a column pipe in bore well or laid in wall/ceiling/floor fixed complete of following size complete all as specified and directed. :- |
| 147 | 100 mm dia |
| 148 | 80 mm dia |
| 149 | S&F GI/MS flange and joining by welding for following dia. of pipe complete all as specified and directed. |
| 150 | 100/ 80 mm dia pipe |
| 151 | S&F CI/DI fittings incl Flange Bend, Socket Bend, Spigot, Tail-piece, Flange Reducer, Mechanical joint etc complete all as specified and directed. |
| 152 | S&F in repairs Gun metal gate valve with iron wheel head, screwed down iron pipe of following size complete all as specified and directed :- |
| 153 | 50 mm bore |
| 154 | 40 mm bore |
| 155 | 32 mm bore |
| 156 | 25 mm bore |
| 157 | S&F in repairs following dia ball valve complete all as specified and directed.:- |
| 158 | 50 mm dia |
| 159 | 25 mm dia |
| 160 | S&F in repairs following dia butterfly valve made of S.G. iron disc including all accessories complete all as specified and directed. |
| 161 | 80 mm dia |
| 162 | 65 mm dia |
| 163 | 50 mm dia |
| 164 | 40 mm dia |
| 165 | S&F in repairs following dia CI sluice valve (ISI marked) both side flanged with SS spindle incl accessories complete all as specified and directed. |
| 166 | 80 mm dia |
| 167 | 50 mm dia |
| 168 | S&F in repairs following dia bronze vertical check valve complete all as specified and directed. :- |
| 169 | 80 mm dia |
| 170 | 65 mm dia |
| 171 | 50 mm dia |
| 172 | 40 mm dia |
| 173 | 25 mm dia |
| 174 | S&F in repairs Foot Valve CI conforming to IS 4038, of size of 80 mm complete all as specified and directed. |
| 175 | S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of dia 15 mm complete all as specified and directed. |
| 176 | S&F in repairs MS short piece of dia 200mm to 40mm of size 0.22 Rm to 0.60 Rm with both end flanged for filteration pipe line as per sample complete all as specified and directed. |
| 177 | S&F in repairs MS bend of dia 80 to 200 mm , 90 degree with one end flanged suitable for filteration pipe line as per sample complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender