|
| 1 | Item Rate BoQ 82559/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR TO BOUNDARY WALL, FENCING, FOOTPATH, DRAIN, SEWAGE LINE, SOAKAGE WELL AND PERIODICAL SERVICES TO BOUNDARY WALL AT MUNDOTA AND BHANKROTA UNDER GE (S) JAIPUR CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 3 | M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified. |
| 4 | All as per ser item No 2.00 here-in-before but except bricks complete all as specified and as directed. (Note:- Serviceable bricks obtained from item No 1.00 shall be used after cleaning and removing mortar.) |
| 5 | Taking down cement plaster on brick or stone or concrete surfaces of wall/ceiling etc , including raking out joints , hacking for key, scrubbing down with water etc. |
| 6 | M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified. |
| 7 | M&L for preparing new or old undecorated surfaces of RCC / Stone / Concrete / brick walls etc. and apply two coat of cement Base Paint complete all as specified and directed. |
| 8 | Material & Labour for preparation of new or previously untreated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, |
| 9 | M&L for preparing old surfaces of RCC / Stone / Concrete / brick walls scrapping, rubbing, cleaning etc. and one coat of cement Base Paint complete all as specified and directed. |
| 10 | Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge, |
| 11 | Dismantling of barbed wire fencing any type complete all as specified and directed. |
| 12 | S&F in repairs galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 15 mm spacing and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) complete all as specified, |
| 13 | M&L for Running welding in repairs for the metal to be welded in thickness exc 20mm but n exc 25mm complete all as specified and as directed |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified. |
| 15 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde- E- 250) quality-A |
| 16 | S & F mild steel work as in fencing posts/ flat iron as in straps to hold chain link fencing incl. cutting tops to shape as directed including drilling holes, notching for wire etc.,flat iron fillets (for securing wire mesh etc.)incl. all necessary drilling, bolting or riveting etc. and similar work complete all as specified.Note:(i) Quoted Rate shall also include for works to carry out on security wall upto height 4.50 mtr.(ii) Rate also includes taking down of old fencing pole from security wall and fixing the new one on same postion where ever required . (iii) Rate also includes necessary tools & plants and scaffolding to carry out work at height upto 4.5 mtr ht of RCC/Stone/Brick security wall. |
| 17 | M&L for preparation for new steel or iron surfaces of any description , not otherwise described ,exc 10 cm girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed |
| 18 | M&L for preparation of old steel surfaces over 10cm width or girth of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.Note: (i) Quoted Rate shall also includes for works to carry out on security wall upto height 4.50 mtr |
| 19 | Dismantling fencing wire mesh of any type and description |
| 20 | Supply only chain link MS galvanised fencing any size or type or as approved by Engineer in Charge |
| 21 | Fixing only Chain link fencing incliding line wire any mesh and type to any type of standards, rails, straining bolts etc includign provision of binding wire |
| 22 | Supply only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 10 to 12 mm dia and exc. 5 cm and nexc. 10 cm long complete all as specified and as directed. |
| 23 | MS round bars 10 mm dia as in round/Sag bars in chain link fence cut to length bent to shape and making hooks complete all as specified. Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) |
| 24 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. & interlocking tiles laid dry or laid dry and pointed all as specified. |
| 25 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in interlocing tiles , PCC below or sides of road surfaces and interlocking/chequered tiles complete all as specified and directed |
| 26 | M&L for Cement concrete type D2 (1:4:8) 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 27 | M&L for chequered cement concrete decorative designed tiles 25 mm thick of size 30cm x 30 cm x 25mm thick or as approved set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floor including 20 mm thick screed bed/bedding layer of mortar in 1:6 including dismantling old unserviceable louver and jallies frame complete all as specfied and as directed. |
| 28 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including M & L for 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 29 | Labour only for dismantling old existing paver block and refixing in same location coloured Machine pressed precast concrete interlocking paver block as obtain from taking down any shape and size confirming to IS 15658-2006 of 60/80mm thickness, with grey cement and pigment laid over and including Material and labour for 25mm thick fine sand cushion complete all as specified and as directed. |
| 30 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 31 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed. |
| 32 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and as directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection. |
| 33 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any loose position not otherwise specifically provided for all as specified and directed. Note: Old Unserviceable TMT obtained from this item shall be deposited in store & taken on charge by EIC. |
| 34 | M&L precast factory made RCC 1:2:4 type B-1, using 20mm graded stone aggregate for drain/manhole cover including placing over manhole all as specifiedNote :- Reinforcement shall be measured and paid separately |
| 35 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia. |
| 36 | M&L PCC 1:2:4 type B1 using 20 mm graded aggregate as in coping,haunching and benching, in saucer drain and other similar work like bands plinth course, splash stones, cover slab on drain etc complete all as specified and directed |
| 37 | M & L for Cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel of drain and benching including finishing the top of benching even and smooth with using extra cement. |
| 38 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc. |
| 39 | M&L for cleaning/desilting of dry drain by means of excavation / removing mud, grass etc and sweeping the sides and bottom of drains including removeing and refixing of drain cover including removing excavated material n.exc 5 Km out side MoD land in low laying area complete all as specified and directed. |
| 40 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth and getting out in soft /loose soil etc complete all as specified and directed. |
| 41 | Removal of excavated materials (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 42 | Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed. |
| 43 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortarof any size complete all as specified and directed. |
| 44 | M&L Double Wall Corrugated (DWC) HDPE pipes in trenches & jointed as specified of 200mm dia complete all as specified and as directed. |
| 45 | M&L Double Wall Corrugated (DWC) HDPE pipes in trenches & jointed as specified of 150mm dia complete all as specified and as directed. |
| 46 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed. |
| 47 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed. |
| 48 | Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required |
| 49 | Cutting into existing manholes for connecting new drains 200mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required complete all specified. |
| 50 | Dismantling of cast iron or reinforced concrete drain pipes of any size, jointed in cement mortar and taking out of trenches, if required |
| 51 | M&L for cast iron soil waste and vent pipes of 100 mm bore in any length with or without ears with cement joints in walls/floors with proper clamping system (MS Flat 25 x 5mm) complete all as specified and as directed. |
| 52 | All as per above here-in-before but 75 mm complete all as specified and as directed. |
| 53 | S&F 100mm bore CI Bends (any radius), diminishing pieces or tapers (larger bore measured) ® complete all as specified and as directed. |
| 54 | S&F 75mm bore CI Bends (any radius), diminishing pieces or tapers (larger bore measured) ® complete all as specified and as directed. |
| 55 | S&F 100mm bore CI (SWR) junction single , (single T) omplete all as specified and as directed |
| 56 | S&F 75mm bore CI (SWR) junction single , (single T) omplete all as specified and as directed |
| 57 | S&F in repair cast iron cowls of for 100 mm bore pipe complete all as specified and as directed. |
| 58 | S&F in repair cast iron cowls of 75 mm bore pipe complete all as specified as as directed. |
| 59 | M&L for removal of blockage and cleaning of manhole manually including removal of taken out material outside defence land distance n.exc. 5KM complete all as specified and directed by Engineer-in-Charge. Note: The quoted unit rate is deemed to be included the cost of labour for opening of man hole cover and re-fixing the same after cleaning the sewer line. |
| 60 | M&L for cleaning of existing sewer line of internal dia 150/200 mm manually from manhole to manhole. Note : The quoted unit rate is deemed to be included the cost of labour for opening of man hole cover and re-fixing the same after cleaning the sewer line. |
| 61 | M&L for removal of blockage and cleaning and in floor trap,gully trap, bottle trap, in kitchen, lobby, bath room, toilets at any height of floor including pipe line up to the first manhole complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for cleaning and removal of blockage in IWC/EWC/Urinal pots at any height of floor including pipe line up to the first manhole complete all as specified and directed by Engineer-in-Charge. Notes for Ser item Nos 58.00 to 61.00:- 1. Quoted Rate shall also includes for necesary tools and plants which is required to carry out the cleaning works i.e cleaning rod, buckets, bamboos sticks, Kashi etc. 2. Minimum 01 No of safaiwala alongwith necessary tools will be required to report to complaint cell (AGE B&R-IV) to collect the complaint slip from concrened JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand on Sundays & Holidays and on additional working hours, contractor shall provide the same to meet the requirements. As per numbers of complaints additional Sweeper/Helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint. 3. In case of absence of the Safaiwala with tools at Complaint Cell on any working day or on the particular day for which demanded, contractor shall be liable to pay penalty @ Rs 400.00 per day. |
| 63 | Removal of blockage in between two manholes of underground sewage line of any type and size upto 200/150 mm dia by means of mechnical rodding with vibrations/drilling concept. A trolley mounted motorized sewer cleaning machine for the execution of item shall have to be provided by the contractor. Blocked material, slugging obtained during execution of this item shall be removed from the site through trolly mounted motor out of defence land. Sewage line between existing two manholes shall be flushed with combined high pressure water jetting cum suction (vaccum type machine suitably mounted on HCV having facilities of hydraulic applications with suitable size of nozzle pipes. Item shall be executed by the contractor upto satisfaction of the Engineer-in-Charge. No extra claim, whatsoever shall be entertained at any stage. Quoted rate shall be deemed to include all aspects mentioned herein. |
| 64 | M&L for cleaning of septic tanks in use of capacity upto any users by taking out complete sludge including sludge water & solids if any, mechanically by HCV mounted suction/discharge machine having flow back facility with sludge tank not less than 6000 ltrs capacity removing & depositing the entire obtained material to a distance exc 5 KM outside the periphery of defence land & covering the entire sludge with local sand/earth complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises |
| 66 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 67 | S&F in repair grating doom of size 100/125/140 mm CP in round or square shape for out let of water etc complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement or cement mortar 1:4 complete all as specified and as directed. |
| 69 | S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to walls including fixing of PVC clamps as per manufacuters direction complete all as specified and as directed. |
| 70 | All as per above here-in-before but 75 mm mm bore pipe complete all as specified and as directed. |
| 71 | S&F in repairs PVC (SWR) bend for 110 mm bore pipe complete all as specified and as directed. |
| 72 | S&F in repairs PVC (SWR) bend for 75 mm bore pipe complete all as specified and as directed. |
| 73 | Schedule of Credit Total in Figures 0.0 0.0 -21261.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Twenty One Thousand Two Hundred & Sixty One Only Please Enable Macros to View BoQ information |
