|
| 1 | S&F in replacement Electronic driver suitable for 90/120/150 watts LED security light fittings. Make should be as per the Existing manufacturer. |
| 2 | S&F in replacement Electronic driver for 30/45/70 watts LED Security light/Flood light/post top. Make should be as per the Existing manufacturer |
| 3 | S&F in replacement Electronic driver for 100/150 watts flood lights. Make should be as per the Existing manufacturer |
| 4 | S&F in replacement Electronic driver for 200/250 watts flood lights. Make should be as per the Existing manufacturer |
| 5 | S&F in replacement Surge protection device(SPD) of capacity 10KV compatible with industrial & outdooor LED fixtures Make should be as per the Existing manufacturer |
| 6 | S&F in replacement MCB SP 230 volts C curve 6-32 amps complete all as specified and directed. |
| 7 | S&F in replacement MCB DP 230 volts C curve 6-32 amps complete all as specified and directed. |
| 8 | S&F in replacement MCB TPN 230 volts C curve 40-63 amps complete all as specified and directed. |
| 9 | S&F in replacement Digital time switch, DIN type daily / weekly with 25 ON/OFF programmes , 16 amps 250 volts AC. complete all as specified and directed. |
| 10 | S&F in replacement Astronomical Digital time switch, 240 volts AC.complete all as specified and directed. |
| 11 | S&F in replacement Power contactor 4 pole AC1 rating 130 A. complete all as specified and directed. |
| 12 | S&F in replacement Power contactor 3 pole AC3 rating 32 A. complete all as specified and directed. |
| 13 | S&F in replacement front mounting add-on aux contact block 2NO + 2NC for MNX/MCX contactors complete all as specified and directed. |
| 14 | S&F in replacement LED 30 watt street light fiitting made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protection with back opening separate driver compartment and having SPD 6 KV for protection incl complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed. |
| 15 | S&F in replacement LED 70 watt street light fiitting made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protection with back opening separate driver compartment and having SPD 6 KV for protection incl complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed. |
| 16 | S&F in replacement LED 90 watt street light fiitting made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protection with back opening separate driver compartment and having SPD 6 KV for protection incl complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed. |
| 17 | S & F in replacement of 30 watts flood light White/Warm white in colour, powder coated and waterproof pressure die cast aluminium enclosure, with inbuilt electronic drivers and SPD 6 KV and IP 66 protection complete ,Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size as reqd at the site complete all as specified and directed by Engr-in-Charge. |
| 18 | S & F in replacement of 100 watts flood light White/Warm white in colour, powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and SPD 6 KV and IP 66 protection complete ,Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size as reqd at the site complete all as specified and directed by Engr-in-Charge. |
| 19 | S & F in replacement of 150 watts flood light White/Warm white in colour, powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and SPD 6 KV and IP 66 protection complete ,Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size as reqd at the site complete all as specified and directed by Engr-in-Charge. |
| 20 | S & F in replacement of 200 watts flood light White/Warm white in colour, powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and SPD 6 KV and IP 66 protection complete ,Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size as reqd at the site complete all as specified and directed by Engr-in-Charge. |
| 21 | S & F in replacement of 250 watts flood light White/Warm white in colour, powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and SPD 6 KV and IP 66 protection complete, Single phase, etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size as reqd at the site complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repair PVC insulated sheathed wire with copper conductor flexible 3 core 1.5 sqmm including suitable size of lugs for looping all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair PVC insulated sheathed wire with copper conductor flexible 3 core 2.5 sqmm including suitable size of lugs for looping all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for marking of pole numbers on hexagonal/octagonal street light poles with synthetic enamel paint or stickers made out of suitable material of approved shape and size or as per sample provided by Engr-in-charge. |
| 25 | Disconnecting/taking down the tilted/leaned hexagonal/Hectagonal GI Pole by engaging suitable crane or manually and refixing the same with new nut and bolt of suitable size on existing foundation complete all as specified and directed by Engr-in-charge |
| 26 | M&L for scrapping down and removing of old deteriorated paint from Post top lantern poles (RCC/GI) /(4 to 6 mtr) height above ground level, preparing surface for painting, applying two coats of black paint upto full height of pole including MS clamps, GI bracket, fitting etc all as directed at site complete as specified and directed by Engr-in Charge. |
| 27 | M&L for scrapping down and removing of old deteriorated paint from steel tubular poles LT (07 to 09 Mtr) height above ground level , preparing surface for painting , applying two coats of aluminium paint upto full height of pole including MS clamps, GI bracket, complete all as specified and directed by Engr-in Charge. |
| 28 | Supply and Fixing in repair 1x18 watt WW (3000K) LED bollard Integral decorative LED bollard with polycarbonate diffuser and IP 65 protection incl demolition of existing PCC as per site requirement and fixing arrangements all as directed by Engr- In - Charge. (Note: Excavation and earth work, PCC for foundation and coping shall be measured paid seperately under respective item of this schedule.) |
| 29 | Supply and Fix in replacement integral 40 Watt LED post top lantern black/ copper dust painted cast aluminium spigot, spun aluminium canopy with clear acrylic cover and accessories complete with 50 mm OD black powder coated MS pipe not less than .3mtr length with suitable 5 mm thick ms base plate with provn of 04 Nos anchoring bolts complete all as specified and directed. |
| 30 | S&F in replacement Circular LED post-top light, 60 watt energy saving, elegantly designed cast aluminium housing and heat sink for thermal management, high efficiency long life LED module aesthetically designed diffuser and reflector to deliver uniform light output, suitable for mounting on existing pole complete all as specified and directed by Engr-In- Charge. Make: Havells Cat part no RINKPT60WLED757PSYMTOPC / LUKER ZEUS LPL460N / Bajaj BGCPNP 60 W LED CW |
| 31 | S&F in replacement 36 watt Post top lantern with options of flat and drop diffuser for area light distribution, Cubical contemporary and sleek design, IP66/IK08 degree of protection suitable for mounting on existing pole complete all as specified and directed by Engr-In- Charge. |
| 32 | Supply and Fix in replacement 12 w LED bush and spike light luminaires in IP 65 enclosure warm white light output, |
| 33 | S&Fin reapir 10 W surface mounted LED Bulk Head Luminaire made of die cast aluminium with Polycarbonate cover, IP65 including all acessories all as specified and directed by Engr-in-charge. |
| 34 | S&F LED lamp 15 watt (white/ warm white in colour) suitable for fixing into exisitng B22 base holder of bollard/ post top light complete all as specified and directed. |
| 35 | S&F LED lamp 15 watt (white/ warm white in colour) suitable for fixing into exisitng E27 base holder of bollard/ post top light complete all as specified and directed. |
| 36 | S&F in replacement E27 base holder suitable for existing post top light complete all as specified and directed. |
| 37 | Supply and errecting in true vertical position steel tubular swaged pole swan neck type single arm 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, including painting with anti corrosive black bituminous paint internally complete and externally up to planting depth with and externally exposed portion with Aluminium paint twin coat over a coat of red oxide primer upto 1.5 mtr above ground level all including taking down unsv/ damaged pole all as required at site or directed by Engr-in-charge.(Note: Excavation and earth work, PCC for foundation and coping shall be measured paid seperately under respective item of this schedule.) |
| 38 | Supply and fix in replacement of Junction box thermo plast (weather proof) IP 66, on street light poles made out of thermoplastic of size 300mm x 200 mm x 105 mm size with connector for connecting incomming and outgoing of cable including 01 No of MCB DP 06 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flats for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incomming, outgoing of cable Complete all as specified and directed by Engr-In-Charge |
| 39 | Supply and fix in replacement of Junction box thermo plast (weather proof) IP 66, on flood light poles made out of thermoplastic of size 140mm x 140 mm x 95 mm size with connector for connecting incomming and outgoing of cable including 01 No of MCB SP 6 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flats for fixing the box on post complete with nuts, bolts and wahers and suitable size of double compression cable glands for incomming, outgoing of cable Complete all as specified and directed by Engr-In-Charge. |
| 40 | S&F in replacement of automatic timer switch distribution board, Single phase, comprising of 40 Amps 2 Pole MCB, power contactor and 230V digital time switch for controlling LED flood lights, all as specified and directed by Engr-in-charge. |
| 41 | Supply and Fix in replacement integral LED aviation light comprising housing with polycarbonate enclosure, aviation light complete all as specified and directed. |
| 42 | M&L Cutting of branches of tree of various length to keep a clear distance 2 mtr from the Street light pole and depositioning the cut branches upto a distance of 50 mtr away from the LT/HT/ overhead line/ Transformer complete all as spd and directed by engrs in charge.(Note :- Each span between pole to pole shall be measured one job) |
| 43 | Supply and fixing 40 mm bore light grade GI pipe for fixing of post top light including painting with anti corrosive black bituminous paint over a coat of red oxide primer including taking down unsv/ damaged pole all as required at site or directed by Engr-in-charge.(Note: Excavation and earth work, PCC for foundation and coping shall be measured paid seperately under respective item of this schedule.) |
| 44 | S&F in replacement Tricolour LED Strip light IP 65, with colours Saffron-White-Green of length not less than 18 mtr incl power supply connector, Connector pin, and End cap as per site requirement for fixing at Street light poles complete all as specified and directed. Please Enable Macros to View BoQ information |
| 45 | S&F in replacement Tricolour LED Strip light IP 65, with colours Saffron-White-Green of length not less than 18 mtr incl power supply connector, Connector pin, and End cap as per site requirement for fixing at Street light poles complete all as specified and directed. Please Enable Macros to View BoQ information |
