Tender For special Repairs To Jcos/ Or Old Suvidha Complex And Addn/ Altn To Bldg No Wb-271 & Bathroom At Chipher Wing At Mcte, Under Ge (Mcte) Mhow
Tender Value
34.75 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
1 days left
EMD
69500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (MCTE) Mhow → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Jcos/ Or Old Suvidha Complex And Addn/ Altn To Bldg No Wb-271 & Bathroom At Chipher Wing At Mcte, Under Ge (Mcte) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 3 | M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 7 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms urinal partition and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. |
| 9 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 10 | S&F glazed (5.0mm thick plain/ coloured glass) aluminum door powder coated consisting of frame of 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size is 110 x 44mm & style of door shutter is 83mm x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangemen, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc complete (Al. section thickness 2mm) confirming to IS. complete all as specified and directed. |
| 11 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with SS brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc. complete all as specified and directed. |
| 12 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 13 | Taking up or down 20mm bore steel tubing and connections, complete all as specified and directed. |
| 14 | S&F, laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specified and directed. |
| 15 | S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specified and directed. |
| 16 | S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. including dismantling old unsv PVC water tank complete all as complete all as specified and directed. |
| 17 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 18 | Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. |
| 19 | M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 22 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of new surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl two coat of wall putty complete all as specified and directed. |
| 24 | M&L for complete removal of existing surface and preparation of old surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface over and incl two coat of wall putty complete all as specified and directed. |
| 25 | M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and directed. |
| 26 | M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and directed. |
| 27 | M&L for Rendering in two coats first coat of 15mm thick and then 5mm thick on other than fair faces of stone exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 28 | M&L for complete removal of existing surface and applying two coats exterior weather coat over one coat of exterior primer over and incl two coat of Exerior grade wall putty etc. complete all as specified and directed. |
| 29 | M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls over two coat of Exerior grade wall putty etc. complete all as specified and directed. |
| 30 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified and directed. |
| 31 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc. complete all as specified and directed. |
| 32 | M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 33 | M&L for PCC 75mm thick type B2 (1:2:4) (using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and directed. |
| 34 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 35 | M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thickfinished surface rough to receive tiliing complete all as specified and directed. |
| 36 | Dismantling old timber scantaling complete all as specified and directed. |
| 37 | S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. |
| 38 | S&F 0.50mm thick galvalume sheet profile pattern precoated coloured as approved by GE, fixed with self driving screws, Including dismantling of GI sheets complete all as specified and directed. |
| 39 | S&F of structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 40 | S&F in repair Vitreous china water closet rimless one piece EWC with slim sofit close seat cover 660 x 350 x 745mm concelled S trap for better aesthetic snow white - whiter than whitest complete all as specified and directed. |
| 41 | S&F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size 360 x 360 x 120mm complete all as specified and directed. |
| 42 | S&F in repair bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 43 | S&F in repair Looking Mirror 6.3mm thick exc 0.50 each pane, Grinding, polishing and rounding edge of glass, drilling holes in glass any type fixed on wall with chrominum plated screws complete all as specified and directed. |
| 44 | S&F in repair chromium plated brass Central hole basin mixer long body without popup waste system complete screwd down for 15mm GI bore pipe complete all as specified and directed. |
| 45 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 46 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 47 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 48 | S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 49 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 50 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 51 | S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 52 | S&F in repairs Toielt Paper Holder Stainless Steel fixed to wall complete all as specified and directed. |
| 53 | S&F in reparis Stainless Steel Wall Mount Soap Case fixed to wall complete all as specified and directed. |
| 54 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed. |
| 55 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed. |
| 56 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 57 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 58 | S&F PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 59 | S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms) complete all as specified and directed. |
| 60 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as on drawing on Sl page No 178 of SSR Part-II, complete all as specified and directed. |
| 61 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 62 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 63 | S&F Aluminum handle cast type anodized size 150mm long, complete all as specified and directed. |
| 64 | S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed. |
| 65 | S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 66 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 67 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 68 | Demolition of reinforced cement concrete in ground floors & paving n.exc 15 cm thickness and removal of debris from site, complete all as specified and directed. |
| 69 | M&L for RCC type A-1 1: 1.5: 3 (20mm graded aggregate) in, Chajja, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 70 | S&F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm Half Stall white colour of premium quality including all fittings like CP coupling, sprender etc complete all as specified and directed. |
| 71 | M&L for concrete bed PCC 1:3:6 type C-2 using 40mm graded stone aggregateto SWG drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land complete all as specified and directed.Note:- Thickness of bed below the barrel of pipe 10cm for pipe 100mm and 150mm dia, 15cm for 200mm dia & over. |
| 72 | M&L for 150 ID/170 OD MM dia DWCPE SN-8 pipes premium quality single soceted in length with joints laid in trenches or in floors including all necessary fitting, joints etc. complete all as specified and directed. |
| 73 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for foundation etc or shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 74 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm, in any type of soil complete all as specified and directed. |
| 75 | Removing excavated soil to a distance n exc 50M & depositing where directed at a level n exc 1.50M above the starting point complete all as specified and directed. |
| 76 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 77 | All as per Srl item No. 75.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 78 | M&L for mirror poishing of old kota stone complete all as specified and directed. |
| 79 | S&F Pressed steel frames for doors size 105 x 60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 80 | M&L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed complete all as specified and directed. |
| 81 | S&F for 35mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 9mm B.W.P or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003/ SSR Part-I, complete all as specified and directed. |
| 82 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc. complete all as specified and directed. |
| 83 | S&F 0.45mm thick galvalume plain sheet precoated coloured roof ridge make JSW or TATA, blue scope building product or equivalent as approved by GE, fixed with self driving screws Including dismantling of GI sheets ridge complete all as specified and directed. |
| 84 | Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 85 | Taking down plastic body exhaust fan of any sweep after disconnecting all necessary electrical connection from ceiling rose to fan, fan blades and deposit to AGE E/M-III Store complete all as specified and directed. |
| 86 | Taking down carefully copper/ aluminium sub-main wiring any size from surface/ concealed/ existing of any height and removing matrials at site and making good the disturbed surface of walls and floors roofs etc. complete all as specified and directed. |
| 87 | M & L for Point wiring for One light/ fan/ bell controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 88 | All as per Srl item No. 87.00 above but One 3 pin, 5/6 Amps switch, socket outlet point controlled by one switch on same board complete all as specified and directed. |
| 89 | All as per Srl item No. 87.00 above but One 3 pin, 5/6 Amps switch, socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 90 | All as per Srl item No. 87.00 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed.Note:- Make of modular GI box should be same with switch/ socket. |
| 91 | S&F Modular Switch flush type 5/6 Amps single pole, one way complete all as specified and directed. |
| 92 | S&F Modular Switch flush type 15/16 Amps single pole, one way complete all as specified and directed. |
| 93 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 94 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 95 | S&F ceiling rose surface bakelite with three terminals, ISI marked for batten fitting complete all as specified and directed. |
| 96 | M&L for Sub main wiring with approval colour coding as per IS with two single core PVC insulated FRLSH cable multistranded copper conductor if size 4 Sqmm nomonal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories heavy duty ISI marked of suitable size including concealed in wall etc. one runs of PVC insulated with 4.0 Sqmm (nomonal area) multistranded copper conductor FRLSH cable as earth wire complete all as specified and directed.Note:- Two runs of 4.0 Sqmm for P and N and one run of same size earth and one run of PVC conduit will be measured as one unit length. |
| 97 | S&F lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed. |
| 98 | S&F replacement LED bulb of 10 watt, of base B-22, 6500 K suitable for fixing in lamp holder, complete all as specified and directed. |
| 99 | S&F in repair Inverter LED batten 4 feet 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 100 | S&F in repair 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified and directed. |
| 101 | S&F for LED luminaire 2 x 2 ft (size 600mm x 600mm) square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size including taking down old unsv LED fitting complete all as specified and directed. |
| 102 | S&F of MCB DB SPN 8 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 103 | S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 104 | Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 105 | S&F of exhaust fan, steel body, AC single phase 230/ 240 V of size 300mm sweep complete with blade, frame including making/ alteration of hole wherever necessary making good disturbed surfaces painting to match with existing surfaces including taking down old exhaust fan and deposit to MES E/M store complete all as specified and directed. |
| 106 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 107 | S&F of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and winding material super enameled copper wire rated power 28W (+10%) and rate speed 350 RPM (+10%) power factor 0.90 Min air delivery 220 CFM with service value shall not be less than 7.85 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store complete all as specified and directed. |
| 108 | Single pole and neutral enclosure (Metal Clad) with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender