|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L Light shade Vitrified Ceramic tiles (10 mm thick (square/ rectangular) polished, size of tiles 600mm X 1200mmx9-10mm thick using spacers in floors etc over 15mm thick over screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 3 | ditto as per serial item No-02 but as in dado/skirting etc over 10mm thick plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, complete all as specified and directed. |
| 4 | M&I Glazed ceramic tiles in vertical surface 300x 600x 7 mm/ 450X 350X 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster as backing coat in CM (1:4) complete all as specified and directed. |
| 5 | M & L for 7 to 8 mm thick anti- skid ceramic coloured digital tiles (Square/ rectangular) area of each tile 300x400mm set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM (1:6) complete all as specified and directed. |
| 6 | M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like in CM (1:4) over and including screed bedding CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete including taking out old one complete all as specified and directed. |
| 7 | M&L heavy duty textured /anti skid surfaces, full body vitrified tiles of size 600X600X15mm thick high value breaking/impact strength set, jointed and painted in white or coloured cement to match the tile over 20mm thick screed bed in CM 1:4 complete all as specified and directed |
| 8 | M & L for fixing of 200x1000mmx9mm thick Ceremic wooden planks/Tiles of rectangular in size fixing over 15mm thick in screed bed in CM 1:6,set and jointed and pointed with wihte or coloured cement to match the surfaces complete all as specifed and directed. |
| 9 | Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all specified and directed. |
| 10 | M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement including two coat of cement base paint over coat cement primer complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coats of OBD over one coat of wall primer including 2mm thick wall care putty complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:3) finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash after preparation of surfaces complete all as specified and directed. |
| 13 | M&L for finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm and including preparation of surfaces complete all as specified and directed. |
| 14 | Taking down chowkhats or frames of size not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed. |
| 15 | Taking down chowkhats or frames exceeding 1.5 sqm each but not exceeding 4.00 Sqm each with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed. |
| 16 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extrude section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed withgalvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and asper directions of Engineer-in-charge. |
| 17 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Windowprofile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steelFrame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 18 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm ( ± 0.2mm). Window profile with hollow section with multi chamber. Frame (109 mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ±-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each, complete all as specified and directed. |
| 19 | S&F 5.50mm thick Sheet glass, ordinary quality and glazing with PVC Beads square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 20 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm for double shutter door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoated by the contractor. Please Enable Macros to View BoQ information |
| 23 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoated by the contractor. Please Enable Macros to View BoQ information |
