Tender For Provn Of High Mast With Led Flood Light In Various Locs At Haws Gulmarg Under Ge 969 Ews.
Tender Value
35.42 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
4 days left
EMD
70840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GULMARG → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of High Mast With Led Flood Light In Various Locs At Haws Gulmarg Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of 16 Mtr. High Mast System Mast shaft shall be in 2 sections, with hot dip Galvanized, There shall be no circumferential weld, It shall also include accessories for high mast including head frame, 3 point suspension system with steel wire rope 6 mm dia double drum winch, Power Tool, Cable, Galvanized Lantern carriage arrangement suitable for 6/12 Luminaries. Including RCC Foundation as per height & bolts manufactured from special steel along with nuts, washers, anchor plates & templates. Bottom Dia.- 360mm, Top Dia.-150mm, Sheet Thickness -3, 3mm,aviation obstruction light, lightning arrester spike with panel, complete all as specified and as directed. |
| 2 | Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed. |
| 3 | Supply Laying jointing and testing LT under ground cables XLPE insulated screened PVC bedded galvanized steel strips armored electric power cable (heavy duty) with aluminium conductor LT grade 1100 volts grade and cross section area 25 sqmm 4 core, complete all as specified and as directed. |
| 4 | Supply and laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with standed copper conductor of size 4 Sqmm 3 core, 1100 volts grade, complete all as specified and as directed. |
| 5 | Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtrs wide and n.exc 1.5 mtr. in deep for foundation of poles, stays, cables pipe etc and getting out, complete all as specified and as directed. |
| 6 | Returning filling in, of excavated soil in trenches incl spreading, leveling, watering and well ramming in layers each layers n.exc 25cm thick in soft/loose, complete all as specified and as directed. |
| 7 | Removal surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and as directed. |
| 8 | Supply and spread river sand to required width at bottom and top for cable cushioning all as specified in clause 19.75 of SSR part -I, complete all as specified and as directed.(Note :- thickness of sand will be measured after punning) |
| 9 | Supply and lay common burnt bricks of sub class B old size laid at right angle on the cable complete in trenches for cable protection, complete all as specified and as directed. |
| 10 | Supply, installation, testing, commissioning LT panel board floor mounted self supporting compartmentalised design of suitable size 440 volts 3 phase 4 wire system powder coating provided with suitable to make it dust/vermir proof. The panel shall be made with 3.15mm thick CRCA sheet for outer shall and inner shall made out of 1.6mm thick CRCA sheet double door with front openble with locking arrangement provision of threadedearthing stud at bottom inner shall be compartmentalised front openble single door system lockble inner shell completly vermir proof and to accomodate incoming/outgoing MCCBs, MCBs motors starter and TPN aluminium bus and extension links copper bus bar of capacity 200Amp-03 Nos and 01 for neutral of capacity 100A duly eposy resin insulator all housed in suitable busbar chamber all control panel wiring shall be 4 sqmm multistanded conductor for power wiring between bus bar to each incoming and outgoing MCCB/MCB with adequate size and shall be proparly bunched/tred ferrule for proper identification and crimped with adequate size of lugs and provision and fixing of voltmeter, Ammeter with built selector switch, CTs of suitable rating ,LED lamp all as specified and directed with following. (MCCB TPN 63Amp, 16KA -01, MCB TPN 32Amp 6KA -03, MCB SPN 16 Amp 6 KA-01, Motor starter) |
| 11 | Earthing complete with galvanized steel earth plate electrode of size 60x60cmx6 mm burried directly in ground vertically at depth not less then 2.25 mtr below normal ground level with top edge of earth plate at depth not less then 1.5 mtr below ground level earthplate surrounded by 15 cm thick and packed layer of charcoal dust and common salt earth lead GI wire by 4 mm dia (8 SWG) by means of bolts, nuts, chec nuts and washers of galvanized iron or steel ane thimbles and other end of the earth wire connected to main switch board and protected by galvanised iron or steel pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh PCC chamber in cement|concrete 1:3:6 type C-2 & RCC cover and all as shown in elect plate No 5 of MES schedule Part I of 1991, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender